소개
Thank you for choosing the KICKER SoloX L7X 12-Inch Competition Subwoofer. This manual provides essential information for the proper installation, operation, and maintenance of your new subwoofer. To ensure optimal performance and longevity, please read this manual thoroughly before attempting installation or use.
The SoloX L7X is engineered for groundbreaking bass performance, featuring a robust design and advanced cooling technology, making it suitable for high-level competition audio systems.
안전 정보
경고:
- Always disconnect the vehicle's battery before installing or servicing any audio components to prevent electrical shock or damage.
- Ensure all wiring is properly insulated and secured to prevent short circuits and potential fire hazards.
- 차량 작동이나 안전 장치를 방해할 수 있는 위치에는 서브우퍼를 설치하지 마십시오.
- Prolonged exposure to sound pressure levels over 100dB can cause permanent hearing loss. Use caution when operating at high volumes.
- 설치 과정의 어떤 부분이라도 확신이 서지 않는다면 전문가에게 문의하십시오.
패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- KICKER SoloX L7X 12-Inch Competition Subwoofer (Model: 49L7X122)
- 사용 설명서(본 문서)
주요 특징
The KICKER SoloX L7X 12-Inch Subwoofer incorporates several advanced features for superior performance:
- Triple-Stacked Ferrite Magnet: Provides an enormous and linear magnetic field for powerful, deep bass reproduction.
- Hyper-Extended Pole Piece: Enhances magnetic field linearity, contributing to precise and impactful low-frequency output.
- Forced Air Cooling Technology: Actively dissipates heat, ensuring stable performance and durability even under extreme conditions.
- Heavy-Duty UV-Resistant Santoprene Surround: Designed for durability and long-term performance in various environments.
- Double-Pressed Pulp Cone: Offers rigidity and lightweight properties for accurate sound reproduction.
- Cast-Aluminum Basket: Provides a robust and stable foundation for the subwoofer's components.
- Field-Replaceable Recone Kit: Allows for easy repair and maintenance without professional assistance.
- Exclusive Surround Compression System: Ensures optimal cone movement and durability.
- Bolt-On Spider Landing and Alignment Shims: Facilitate precise assembly and maintenance.
- Flexible Wiring Options: Features a single 8 AWG terminal and a dual 8 AWG terminal block for versatile installation.
이미지: 앞면 view of the KICKER SoloX L7X 12-Inch Competition Subwoofer, showcasing its square cone and robust surround.
이미지: 각도 view of the KICKER SoloX L7X 12-Inch Subwoofer, highlighting its deep basket and cooling fins.
이미지: 사이드 프로file of the KICKER SoloX L7X 12-Inch Subwoofer, showing the depth of the motor structure and the cooling design.
이미지: 클로즈업 view of the heavy-duty UV-resistant Santoprene surround, demonstrating its robust construction.
설정 및 설치
Proper installation is crucial for the performance and longevity of your SoloX L7X subwoofer. It is recommended to have this subwoofer installed by a qualified professional.
인클로저 요구 사항
The SoloX L7X is designed for use in custom-built enclosures. Refer to KICKER's official documentation or website for recommended enclosure volumes and port tuning frequencies for optimal performance. An improperly sized or constructed enclosure can severely limit the subwoofer's performance and potentially cause damage.
배선 연결
The SoloX L7X features a single 8 AWG terminal and a dual 8 AWG terminal block, allowing for flexible wiring configurations (e.g., series or parallel) to achieve the desired impedance for your amplifier. Ensure all connections are secure and properly insulated.
- 전원 배선: Use appropriate gauge power and ground wires for your amplifier's power output. Ensure the ground connection is made to a clean, unpainted metal surface of the vehicle chassis.
- 스피커 배선: Connect the subwoofer terminals to your amplifier's speaker outputs. Pay close attention to polarity (+ to + and - to -) to ensure proper phase and sound quality.
이미지: 후면 각도 view of the KICKER SoloX L7X Subwoofer, illustrating the single and dual 8 AWG terminal blocks for wiring flexibility.
이미지: 측면 view of the KICKER SoloX L7X Subwoofer, providing a closer look at the robust terminal connections.
Amplifier 매칭
선택하세요 amplifier that can provide sufficient power within the subwoofer's RMS power handling capabilities. Overpowering or underpowering the subwoofer can lead to damage. Match the amplifier's output impedance to the subwoofer's impedance for optimal power transfer and efficiency.
작동 지침
Once installed, the SoloX L7X subwoofer requires proper tuning for optimal sound quality and longevity.
- 침입 기간: 서브우퍼를 고음량으로 작동하기 전에 몇 시간 동안 적당한 강도로 사용하면서 길들이기 기간을 가지십시오. 이렇게 하면 서스펜션 부품이 부드러워져 최적의 성능을 발휘할 수 있습니다.
- 이득 설정: 설정하다 amp앰프의 게인 컨트롤을 조심스럽게 다루십시오. 게인 컨트롤을 볼륨 조절 노브처럼 사용하지 마십시오. 출력 볼륨에 맞춰 설정해야 합니다.tage of your head unit. Refer to your amp앰프의 게인 설정 절차는 설명서를 참조하십시오.
- 크로스오버 설정: 저역 통과 필터(LPF)를 사용하세요 amplifier or head unit to send only low frequencies to the subwoofer. A typical crossover point for subwoofers is between 60Hz and 100Hz.
- 아음속 필터: 만약 당신의 amplifier에는 아음속 필터가 있습니다. 이 필터를 활성화하고 인클로저의 튜닝 주파수보다 약간 낮게 설정하면 서브우퍼가 매우 낮은 주파수에서 과도한 편차를 방지할 수 있습니다.
- 베이스 부스트 : Use bass boost sparingly, if at all. Excessive bass boost can lead to distortion and damage the subwoofer.
Video: An official KICKER video showcasing the SoloX L7X High Performance Subwoofer, detailing its features and design. This video provides a visual overview of the product's capabilities and construction.
유지
The KICKER SoloX L7X is built for durability, but regular maintenance can extend its lifespan and ensure consistent performance.
- 청소: Keep the subwoofer cone and surround free of dust and debris. Use a soft, dry cloth for cleaning. Avoid using harsh chemicals or solvents.
- 점검: Periodically inspect the surround and cone for any signs of damage, tears, or fatigue. Check all wiring connections for tightness and corrosion.
- Field-Replaceable Recone Kit: The SoloX L7X features a field-replaceable recone kit. If the cone or voice coil assembly becomes damaged, you can replace these components without needing to replace the entire subwoofer. Follow the instructions provided with the recone kit for proper installation. This process involves the exclusive surround compression system, bolt-on spider landing, and alignment shims.
문제 해결
If you experience issues with your SoloX L7X subwoofer, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 서브우퍼에서 소리가 나지 않습니다 |
|
|
| 왜곡된 소리 |
|
|
| 약한 저음 출력 |
|
|
명세서
| 기인하다 | 세부 사항 |
|---|---|
| 모델 번호 | 49L7X122 |
| 품목 무게 | 52.9파운드 |
| 제조업체 | 차는 사람 |
| ASIN | B08NF9PDLV |
| 첫 번째 가능한 날짜 | 13년 2020월 XNUMX일 |
| 코일 | 3인치 |
| 자석 타입 | Ferrite (Triple-Stacked) |
| 임피던스 | 2옴 |
보증 및 지원
KICKER products are designed and manufactured to the highest standards. For specific warranty information, please refer to the warranty card included with your product or visit the official KICKER web사이트. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.
For technical support, troubleshooting assistance, or to inquire about replacement parts (such as the recone kit), please contact KICKER customer service or visit their official support channels. You can often find detailed FAQs, product manuals, and contact information on the KICKER web대지.
