LEXON LL128N Fingerprint Padlock User Manual

1. 이상view

This manual provides detailed instructions for the LEXON LL128N Fingerprint Padlock. Please read this manual carefully before using the product to ensure proper operation and longevity. This biometric padlock offers secure, keyless access with advanced features for various applications.

2. 제품 특징

• 생체 지문 인식: Securely unlock with your fingerprint. Supports up to 10 registered users.
• 내구성 있는 구조: Made from stainless steel and zinc alloy for enhanced security.
• 내후성: IP65 waterproof and dustproof rating, suitable for both indoor and outdoor use.
• 오래 지속되는 배터리: Up to 3000 unlocks on a single charge. Offers a standby time of up to 12 months.
• USB-C 충전: Conveniently rechargeable via a Type-C USB cable (included). Full charge in approximately 1.5 hours.
• 우아한 디자인: Designed by Guillaume Delvigne, available in multiple colors.

Image: The LEXON Nomaday Lock showcasin디자인과 사용 가능한 색상을 살펴보세요.

3. 패키지 내용

• LEXON LL128N Fingerprint Padlock
• USB-C 충전 케이블
• 사용자 설명서

4. 설정

4.1 Initial Fingerprint Registration (Administrator)

Upon first use, the padlock is in default status, meaning any fingerprint can unlock it. You must register the first two fingerprints as administrators. These first two fingerprints are crucial for managing additional users and resetting the device.

1. Press and hold your finger on the fingerprint sensor until the 푸른 빛 illuminates. Release your finger.
2. 그만큼 녹색불 will illuminate. Place your finger on the sensor repeatedly from various angles until the green light turns off. This completes the registration of the first administrator fingerprint.
3. 동안 녹색불 is still illuminated, use a different finger and repeat step 2. This registers the second administrator fingerprint.

After completing these 3 steps, the first two fingerprints are successfully set as administrators. The padlock will now only unlock with these registered fingerprints.

4.2 Registering Additional Fingerprints (Users 3-10)

To add more user fingerprints (up to a total of 10), an administrator fingerprint is required.

1. 를 누르고 계세요 관리자 손가락 on the sensor until the 푸른 빛 illuminates. Release the finger.
2. 그만큼 녹색불 will illuminate. Have the new user place their finger on the sensor repeatedly from various angles until the green light turns off. This registers the new user's fingerprint.

Repeat these steps for each additional user, up to a maximum of 10 fingerprints in total.

4.3 Deleting All Fingerprints (Factory Reset)

To delete all registered fingerprints and restore the padlock to its factory default state (any fingerprint can unlock), follow these steps:

1. 배치하다 관리자 손가락 on the sensor and hold it. The 푸른 빛 will illuminate, then turn 빨간색. Continue holding.
2. After the red light illuminates, the 녹색불 will flash once. Release your finger immediately after the green light flashes.

All fingerprints are now deleted, and the lock is reset to its default state. Any fingerprint can now unlock the device until new administrator fingerprints are registered.

5. 사용 설명서

5.1 자물쇠 풀기

To unlock the padlock, simply place a registered finger on the fingerprint sensor. The padlock will unlock within 0.5 seconds if the fingerprint is recognized.

Image: A hand demonstrating the unlocking process by placing a finger on the sensor.

5.2 자물쇠 잠그기

To lock the padlock, simply push the shackle down until it clicks into place. The padlock will automatically lock.

6. 자물쇠 충전하기

The LEXON LL128N Padlock is equipped with a rechargeable Lithium-ion battery. When the battery is low, the indicator light will flash red. To charge:

1. Locate the USB-C charging port, usually covered by a protective cap.
2. Connect the provided USB-C cable to the padlock and to a standard USB power source (e.g., computer, wall adapter).
3. 표시등은 충전 상태를 나타냅니다(예: 빨간색은 충전 중, 녹색은 완충 시).

A full charge takes approximately 1.5 hours and provides power for up to 3000 unlocks or 12 months of standby time.

7. 유지관리

• 청소: Wipe the padlock with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• 지문 센서 : 지문 센서의 최적 성능을 위해 깨끗하고 건조한 상태를 유지하십시오.
• 충전 포트: Ensure the USB-C charging port is free from dust and debris. Keep the protective cap closed when not charging.
• 저장: Store the padlock in a cool, dry place when not in use for extended periods.

Image: The padlock demonstrating its IP65 waterproof capabilities, suitable for various environments.

8. 문제 해결

9. 사양

Image: A visual representation of the product's technical specifications.

10. 보증 및 지원

The LEXON LL128N Fingerprint Padlock comes with a 1년 제조사 보증 구매일로부터. 이 보증은 정상적인 사용 하에서 재료 및 제조상의 결함을 포함합니다.

For warranty claims or technical support, please contact your retailer or visit the official LEXON web고객 서비스 정보를 제공하는 사이트입니다.