Beckett BK171UL

안전 스위치가 있는 Beckett BK171UL 응축수 펌프 사용 설명서

Model: BK171UL

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of the Beckett BK171UL Condensate Pump. This pump is designed for automatic removal of condensate from HVAC equipment, including air conditioners, furnaces, boilers, dehumidifiers, and high-efficiency oil or gas-fired furnaces. It is suitable for condensate water temperatures up to 150°F and acidic condensate.

Beckett BK171UL Condensate Pump

Image 1.1: Beckett BK171UL Condensate Pump, front view.

2. 안전 정보

경고: 감전 위험이 있습니다. 수리하기 전에 전원을 차단하십시오.

  • 설치 및 작동 전에 모든 지침을 주의 깊게 읽으십시오.
  • 전원 공급 장치가 펌프의 볼륨과 일치하는지 확인하십시오.tag전자(115V).
  • 손상된 코드나 플러그로 펌프를 작동하지 마세요.
  • 펌프를 물에 담그지 마십시오.
  • 이 펌프는 실내용으로만 설계되었습니다.
  • 작동 중에는 움직이는 부분에 손이 닿지 않도록 주의하세요.
  • 현지 전기 규정에 따라 올바르게 접지되었는지 확인하십시오.
  • The pump is equipped with a safety switch. Ensure it is correctly wired to prevent overflow.

3. 패키지 내용

설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

  • Beckett BK171UL Condensate Pump unit
  • 3/8" O.D. barbed check valve
  • Integrated 6-ft grounded power cord
  • 사용 설명서(본 문서)
폭발했다 view of Beckett BK171UL Condensate Pump components

이미지 3.1: 폭발 view showing pump components including cover, check valve, motor, fan, automatic switches, lift-to-test tab, bullseye level, floats, impeller, multi-slot metal mount tabs, 6 ft. grounded power cord, and collection tank.

4. 설치 및 설정

4.1 펌프 장착

The pump features stainless steel multi-slot mounting tabs for secure installation. Ensure the pump is placed on a level surface. Use the integrated bullseye level on the lid to confirm proper horizontal alignment.

Beckett BK171UL Condensate Pump installation features

Image 4.1: Close-up of pump showing bullseye level, twist lock check valve, and lift-to-test tab for easy installation and maintenance.

4.2 Condensate Inlet Connections

The pump is equipped with four 1-1/8-inch diameter inlet holes for connecting condensate drain lines from your HVAC equipment. Connect the drain line(s) to any available inlet(s).

4.3 배출 라인 연결

Connect a 3/8" I.D. vinyl tubing (not included) to the 3/8" O.D. barbed check valve. The check valve twists to lock into place on the pump, preventing backflow of discharged water. Route the discharge line to an appropriate drain, ensuring it has a continuous downward slope and is free from kinks or obstructions. The pump can lift water up to 17 feet vertically.

4.4 전기 연결

Plug the 6-ft grounded power cord into a standard 115V electrical outlet. Ensure the outlet is properly grounded and protected by a ground fault circuit interrupter (GFCI) if required by local codes.

4.5 Safety Switch Wiring

The integrated safety switch is designed to shut down the HVAC equipment or trigger an alarm in case of a pump malfunction or high water level, preventing overflow. Consult your HVAC equipment manual for proper wiring of the safety switch. Typically, the safety switch wires are connected in series with the low-voltage thermostat circuit of the HVAC unit.

5. 운영

5.1 Automatic On/Off Operation

The Beckett BK171UL pump operates automatically. When condensate water in the collection tank reaches a predetermined level, the pump will activate, remove the water, and then shut off once the water level drops. This automatic cycle ensures efficient condensate removal without constant monitoring.

Beckett BK171UL Condensate Pump performance chart

Image 5.1: Diagram illustrating automatic ON/OFF operation and average performance at various lift heights (e.g., 95 GPH at 5 ft lift, 64 GPH at 10 ft lift, 17 ft shut-off).

5.2 Lift-to-Test Function

A "lift-to-test" tab is provided on the pump lid. Lifting this tab manually raises the float, simulating a high water level and activating the pump. This feature allows for quick testing of the pump's functionality and can also be used to drain the tank for servicing.

6. 유지관리

정기적인 유지관리를 통해 최적의 성능을 보장하고 응축수 펌프의 수명을 연장할 수 있습니다.

  • 월별 검사: Visually inspect the pump, inlet, and discharge lines for any blockages, leaks, or damage. Ensure the discharge line is free of kinks.
  • 분기별 청소:
    1. Disconnect power to the pump and the HVAC unit.
    2. Use the lift-to-test tab to drain the tank, or manually remove any remaining water.
    3. Carefully remove the pump cover.
    4. Clean the collection tank, floats, and impeller area to remove any sludge, debris, or mineral deposits. A mild detergent and soft brush can be used.
    5. 모든 구성품을 깨끗한 물로 깨끗이 헹구세요.
    6. Reassemble the pump, ensuring the cover is securely in place.
    7. Reconnect power and test the pump using the lift-to-test tab.
  • 배출 라인: Periodically check the discharge line for algae or mineral buildup, especially if the pump is handling acidic condensate. Clean or replace the tubing as necessary.

7. 문제 해결

문제가능한 원인해결책
펌프가 작동하지 않음펌프에 전원이 공급되지 않음Check power cord connection, circuit breaker, and GFCI.
Float switch stuck or obstructedDisconnect power, remove cover, clean floats and tank.
펌프는 작동하지만 물이 배출되지 않습니다.Discharge line clogged or kinkedInspect and clear the discharge line. Ensure no kinks.
Check valve obstructedDisconnect power, remove and clean the check valve.
임펠러 막힘Disconnect power, remove cover, clean impeller area.
펌프가 지속적으로 작동Float switch stuck in "on" positionDisconnect power, remove cover, clean floats and tank.
Leak in discharge line or check valveInspect all connections and the discharge line for leaks. Tighten or replace as needed.
펌프가 시끄럽다Debris in impeller or motorDisconnect power, remove cover, clean impeller area.
펌프가 수평이 아닙니다Adjust pump placement using the bullseye level.

8. 사양

  • 모델: BK171UL
  • 권tage: 115V
  • Maximum Lift: 17 피트
  • 유량: 112 GPH @ 1 ft lift
  • Amp나이: 1.1 Amps
  • 왓tage: 60 와트
  • 빈도: 60헤르츠
  • Collection Tank Capacity: 2.5쿼트
  • 방전 연결: 3/8" O.D. barbed check valve
  • 입구 연결: Four 1-1/8" diameter holes
  • 전원 코드: 6 ft grounded with plug
  • Maximum Condensate Water Temperature: 150 ° 화씨
  • 재료: 아크릴로니트릴 부타디엔 스티렌(ABS), 플라스틱
  • 치수(길이 x 너비 x 높이): 11.2인치 x 5.2인치 x 6.6인치
  • 품목 무게: 3.7 파운드
  • 안전 기능: Integrated safety switch, Thermally protected motor
  • 인증: UL/cUL listed in U.S./Canada
Beckett BK171UL Condensate Pump dimensions

Image 8.1: Dimensions of the Beckett BK171UL Condensate Pump.

9. 보증 및 지원

The Beckett BK171UL Condensate Pump comes with a 3년 제조사 보증. For warranty claims, technical assistance, or replacement parts, please contact Beckett Corporation customer support. Keep your purchase receipt as proof of purchase.

For further assistance, please refer to the official Beckett Corporation web사이트 또는 고객 서비스 부서에 문의하십시오.

관련 문서 - BK171UL

사전view Beckett CB22 자동 응축수 펌프: 설치, 작동 및 안전 설명서
Beckett CB22 자동 응축수 처리 장치 사용 설명서입니다. 설치, 안전 작동, 배선, 유지보수, 문제 해결 및 제한 보증에 대한 자세한 지침이 포함되어 있습니다.
사전view Beckett BK17/BK22 응축수 제거 펌프 설치 및 유지 관리 가이드
이 가이드에서는 Beckett BK17 및 BK22 응축수 제거 펌프에 대한 자세한 설치, 유지관리 및 안전 지침을 제공하며, 여기에는 보증 정보와 성능 사양이 포함됩니다.
사전view 베켓 자동 응축수 제거 펌프 설치 및 작동 설명서
This manual provides comprehensive installation, operation, wiring, testing, and troubleshooting guidance for Beckett Automatic Condensate Removal Pumps, including models CL201UL, CL202UL, CL202ULHT, and CL202CE. It details warranty information and maintenance procedures.
사전view Beckett AquaSmart 7600 Boiler Control Quick Reference Guide
A concise quick reference guide for the Beckett AquaSmart 7600 Series boiler control, covering technical specifications, installation, basic programming, and wiring diagrams, along with warranty information.
사전view Beckett PowerLight 24Vdc Igniter Installation Instructions
Comprehensive installation guide for the Beckett PowerLight 24Vdc Igniter. This document provides essential application information, detailed specifications, critical safety warnings, and step-by-step instructions for models 5272001U, 5272002U, and 5272005U, ensuring proper setup for oil burner systems.
사전view Beckett AquaSmart 모델 7600 고급 보일러 제어 설치 및 작동 설명서
Beckett AquaSmart 모델 7600 보일러 제어 시스템에 대한 포괄적인 가이드로, 설치, 배선, 프로그래밍, HeatManager™와 같은 기능, 주거 및 경상업용 애플리케이션의 문제 해결 등을 다룹니다.