Ardes ARM8P02

ARDES ARM8P02 NEAT Air Purifier User Manual

Model: ARM8P02

소개

Thank you for choosing the ARDES ARM8P02 NEAT Air Purifier. This device is designed to improve your indoor air quality by filtering out pollutants, allergens, and odors. Please read this manual carefully before operating the appliance to ensure safe and efficient use. Keep this manual for future reference.

안전 정보

화재, 감전 또는 부상의 위험을 줄이려면 다음 안전 예방 조치를 준수하세요.

제품 구성요소 및 특징

The ARDES ARM8P02 NEAT Air Purifier features advanced technology for effective air purification.

ARDES ARM8P02 NEAT Air Purifier control panel with touch buttons, showing 3 speed settings and light indicators.

제어판 및 작동

  • 터치 제어판: Easily manage settings with intuitive touch buttons located on the top of the unit.
  • 3 속도 설정: Adjust the fan speed to your preference for optimal air circulation and purification.
  • 표시등: Visual indicators provide feedback on the current operating mode and air quality.
ARDES ARM8P02 NEAT Air Purifier's triple-layer filter system, including pre-filter, HEPA filter, and activated carbon filter, with an icon for negative ions.

Triple-Layer Filtration System

The air purifier utilizes a comprehensive three-stage filtration system to ensure clean air:

  1. 사전 필터: Captures larger particles such as pet dander, dust, and lint.
  2. HEPA 필터 : Traps fine particles, including dust mites, pollen, and other allergens.
  3. 활성탄 필터: Absorbs harmful chemicals, gases, and unpleasant odors like smoke.

또한, 이온화기 releases negative ions to further enhance air freshness and quality.

ARDES ARM8P02 NEAT Air Purifier highlighting efficient HEPA H13 filter, CADR of 140 m³/h, and room indicators.

성과 지표

  • Efficient HEPA H13 Filter: Ensures high-level filtration of airborne particles.
  • CADR: 140 m³/h: Clean Air Delivery Rate indicates the volume of clean air produced per hour, suitable for rooms up to 25 square meters.
  • Room Indicators: Provides information relevant to the air quality in your environment.

설정

Follow these steps to set up your ARDES ARM8P02 NEAT Air Purifier:

  1. 단위 풀기: 공기청정기를 포장에서 조심스럽게 꺼내십시오. 나중에 보관하거나 운반할 때를 대비하여 포장재를 보관해 두십시오.
  2. 필터 포장 제거: Open the filter compartment (usually located at the bottom or back of the unit) and remove the plastic packaging from the filter. The filter is typically pre-installed but wrapped for protection.
  3. 필터 설치: 필터를 본체에 다시 넣고 제대로 장착되었는지 확인하십시오. 필터함 덮개를 단단히 닫으십시오.
  4. 정수기 위치: Place the air purifier on a firm, level surface. Ensure there is at least 20 cm (8 inches) of space around the air inlet and outlet for optimal airflow.
  5. 전원에 연결: 전원 코드를 적합한 콘센트에 꽂으세요.
ARDES ARM8P02 NEAT Air Purifier placed on a table in a living room next to a plant, demonstrating typical placement.

Image: Proper placement of the air purifier in a room.

작동 지침

Operating your ARDES ARM8P02 NEAT Air Purifier is straightforward:

  1. 전원 켜기/끄기: Press the power button on the touch control panel to turn the unit on or off.
  2. 팬 속도 조정: Tap the fan speed button to cycle through the 3 available speed settings (Low, Medium, High). Choose a higher speed for faster purification or a lower speed for quieter operation.
  3. 야간 모드: Activate night mode for quiet operation during sleep. In this mode, the fan speed is reduced, and indicator lights may dim or turn off.
  4. 이오나이저 기능: The ionizer function typically operates automatically or can be toggled via a dedicated button on the control panel, if available. Refer to the specific icons on your unit's touch panel.

The LED display will show current settings and air quality indicators.

유지

정기적인 유지관리를 통해 최적의 성능을 보장하고 공기 청정기의 수명을 연장할 수 있습니다.

외부 청소

필터 교체

The triple-layer filter (pre-filter, HEPA, activated carbon) is a combined unit and should be replaced periodically. The lifespan of the filter depends on usage and air quality, but typically ranges from 6 to 12 months.

  1. 전원 콘센트에서 공기청정기의 플러그를 뽑으세요.
  2. 필터함 덮개를 찾아 여세요.
  3. Carefully remove the old filter. Dispose of it according to local regulations.
  4. Unpack the new ARDES ARM8P02 replacement filter (ensure it's the correct model).
  5. Insert the new filter into the compartment, making sure it fits snugly.
  6. 필터 칸 덮개를 닫습니다.
  7. Plug the unit back in. Some models may require a filter reset button to be pressed after replacement. Refer to your unit's specific instructions if a filter indicator light remains on.

메모: Replacement filters are essential for maintaining purification efficiency. Ensure you purchase genuine ARDES replacement filters for model ARM8P02.

문제 해결

공기 청정기에 문제가 발생하면 다음의 일반적인 문제와 해결 방법을 참조하세요.

문제가능한 원인해결책
기기가 켜지지 않습니다.Not plugged in; power outlet malfunction; power button not pressed; damaged power cord.Ensure the power cord is securely plugged into a working outlet. Press the power button firmly. Check for any visible damage to the cord.
공기 흐름이 약하거나 공기가 나오지 않습니다.Air inlets/outlets blocked; filter clogged; filter packaging not removed.Check for obstructions around the unit. Clean or replace the filter. Ensure all filter packaging has been removed.
이상한 소음.Unit not on a level surface; foreign object inside; filter not installed correctly.Place the unit on a stable, level surface. Unplug and check for any foreign objects. Reinstall the filter correctly.
대기 질이 개선되지 않습니다.Filter needs replacement; room size too large; excessive pollutants.Replace the filter if it's old. Ensure the unit is used in a room within its recommended coverage area (up to 25 sqm). Consider running the unit on a higher speed.
Indicator lights are flashing or behaving unusually.Filter replacement reminder; internal error.Replace the filter and reset the filter indicator if applicable. If the issue persists, unplug the unit for 5 minutes and plug it back in. Contact customer support if the problem continues.

If the problem persists after trying these solutions, please contact ARDES customer support.

명세서

모델 번호ARM8P02
상표아르데스
치수(폭 x 깊이 x 높이)22cm x 22cm x 28cm(8.7 x 8.7 x 11인치)
무게2.4kg(5.3파운드)
전원코드식 전기
필터 유형Triple-layer (Pre-filter, HEPA H13, Activated Carbon)
CADR(청정 공기 공급율)140m³/시
추천 객실 크기Up to 25 sqm (269 sq ft)
특별 기능Ionizer, Touch Control Panel, 3 Speed Settings, Night Mode
Dimensions of the ARDES ARM8P02 NEAT Air Purifier, showing 22 cm width, 22 cm depth, and 28 cm height.

Image: Physical dimensions of the air purifier.

보증 및 지원

ARDES products are designed for reliability and performance. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official ARDES web대지.

For technical assistance, replacement parts (such as filters), or any other inquiries, please contact ARDES customer support. Contact details can typically be found on the product packaging, the official ARDES web사이트 또는 구매 문서.

ARDES: Committed to providing functional, safe, and easy-to-use products for your home and kitchen for over 60 years.