ICT 빌렛 LS 턴버클 교류 발전기 재배치 브래킷 키트 사용 설명서

1. 제품 오버view

The ICT Billet LS Turnbuckle Alternator Relocation Bracket Kit is designed to reposition the alternator on various LS series engines. This kit is particularly useful for applications where the original alternator mounting interferes with other engine components, such as power steering pumps or specific intake manifolds. Constructed from high-quality aluminum, this bracket kit ensures durability and precise fitment, providing a clean and efficient accessory drive layout.

Figure 1: The ICT Billet LS Turnbuckle Alternator Relocation Bracket Kit shown installed on an LS engine, demonstrating the relocated alternator and power steering pump.

2. 호환성

This bracket kit is compatible with a wide range of GM LS series engines, including but not limited to LS1, LM7, LR4, LQ4, LS6, L59, LQ9, LM4, and L33. It is specifically designed to work with LS1 Camaro power steering setups. Proper fitment is dependent on the specific crank pulley spacing of your LS engine.

2.1 LS Crank Spacing Guide

It is crucial to identify your engine's crank pulley spacing to ensure correct bracket selection and installation. Refer to the guide below to determine your crank spacing type (Corvette/CTS-V/SS/G8, 98-02 Camaro/GTO, or Truck/SUV/2010-Up Camaro).

Figure 2: LS Crank Spacing Guide illustrating the three common crank pulley offsets and their corresponding part number endings. This guide is essential for verifying compatibility.

3. 키트 내용물

Before beginning installation, verify that all components listed below are present in your kit. If any parts are missing or damaged, please contact ICT Billet customer support.

Figure 3: All components included in the ICT Billet LS Turnbuckle Alternator Relocation Bracket Kit, including the main brackets, turnbuckle, and various bolts and spacers.

• Main Alternator Bracket
• 파워 스티어링 펌프 브래킷
• 턴버클 텐셔너
• Assorted Spacers
• Mounting Hardware (Bolts, Nuts)

4. 설치(Setup)

Installation of the ICT Billet LS Turnbuckle Alternator Relocation Bracket Kit requires mechanical aptitude and appropriate tools. If you are not comfortable performing this installation, it is recommended to seek professional assistance. Always ensure the engine is cool and the battery is disconnected before beginning work.

4.1 설치 전 확인 사항

• Verify engine compatibility and crank spacing using the guide in Section 2.1.
• Ensure all kit components are present and undamaged (refer to Section 3).
• Gather necessary tools (sockets, wrenches, torque wrench, etc.).

4.2 설치 단계

1. 차량 배터리의 음극 단자를 분리합니다.
2. Remove the existing serpentine belt and any components that obstruct access to the alternator and power steering pump.
3. Carefully remove the original alternator and power steering pump from their mounting locations.
4. Mount the new ICT Billet brackets to the engine block using the provided hardware and appropriate spacers. Ensure all bolts are hand-tightened initially.
5. Attach the alternator and power steering pump to their new positions on the ICT Billet brackets.
6. Install the turnbuckle tensioner between the alternator and its mounting point, allowing for belt tension adjustment.
7. Route the new serpentine belt according to your engine's accessory drive configuration. Ensure the belt is properly seated on all pulleys.
8. Adjust the turnbuckle to achieve the correct belt tension. The belt should have minimal deflection when pressed firmly.
9. Torque all mounting bolts to the manufacturer's specifications (refer to your vehicle's service manual for specific torque values for accessory mounts).
10. Reconnect the battery and start the engine to check for proper operation, belt alignment, and any unusual noises.

Figure 4: Technical drawing providing key dimensions of the bracket kit when installed, useful for clearance checks and custom applications.

그림 5: 측면 view of an LS engine showcasing the installed alternator relocation bracket and the new position of the alternator and power steering pump.

5. 운영

Once correctly installed, the ICT Billet LS Turnbuckle Alternator Relocation Bracket Kit functions as a static mounting solution. Its primary role is to securely hold the alternator and power steering pump in their new, optimized positions, ensuring proper belt alignment and tension. There are no operational controls for the bracket itself; its "operation" is passive, facilitating the correct function of the relocated accessories.

6. 유지관리

To ensure the longevity and continued performance of your ICT Billet bracket kit and the associated accessories, periodic maintenance is recommended:

• 볼트 조임: Periodically check all mounting bolts for tightness, especially after the first few hundred miles of operation. Vibrations can sometimes cause bolts to loosen.
• 벨트 검사: Regularly inspect the serpentine belt for signs of wear, cracking, fraying, or glazing. Replace the belt if any damage is observed.
• 벨트 장력: Verify that the belt tension remains optimal. Adjust the turnbuckle if the belt feels loose or exhibits excessive deflection.
• 정렬 확인: Visually inspect the alignment of all pulleys. Misalignment can lead to premature belt wear and accessory failure.
• 청소: Keep the brackets clean from excessive dirt, oil, and debris. A simple wipe-down with a clean cloth is usually sufficient.

7. 문제 해결

This section addresses common issues that may arise after installation of the bracket kit. Always ensure the engine is off and cool before performing any troubleshooting steps.

8. 사양

9. 보증 및 지원

Specific warranty information for the ICT Billet LS Turnbuckle Alternator Relocation Bracket Kit was not provided in the product data. For details regarding warranty coverage, returns, or technical support, please contact ICT Billet directly through their official website or customer service channels. It is recommended to retain your proof of purchase for any warranty claims.

You can visit the ICT Billet Store for more information: ICT Billet Store on Amazon