Reverie R400 Adjustable Power Bed Base User Manual

소개

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Reverie R400 Electric Bluetooth Fabric Adjustable Power Bed Base. Please read this manual thoroughly before assembly and use to ensure proper function and safety. Keep this manual for future reference.

안전 정보

중요 안전 지침:

• 조립이 필요합니다. 모든 조립 지침을 주의 깊게 따르세요.
• Keep all electrical cords away from heat sources, water, and sharp objects to prevent damage and electrical hazards.
• Do not operate the massaging function or use the remote control while sleeping.
• 오작동을 방지하기 위해 리모컨은 어린이의 손이 닿지 않는 곳에 보관하십시오.
• 전원 코드가 접지된 전기 콘센트에 단단히 꽂혀 있는지 확인하십시오.
• Avoid placing heavy objects on the adjustable base, especially when in motion.
• Do not allow children or pets to play on or under the adjustable base.

패키지 내용

조립을 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

• Reverie R400 Adjustable Power Bed Base Frame
• Legs (quantity may vary by size)
• 무선 원격 제어
• 전원 공급 장치 및 코드
• 매트리스 리테이너 바
• 사용 설명서 (본 문서)

설정 및 조립

The Reverie R400 adjustable base requires user assembly. Follow these steps carefully:

1. 구성 요소 풀기: Carefully remove all items from the packaging. Place the base frame upside down on a clean, flat surface to access the leg attachment points.
2. 다리 부착: Screw each leg clockwise into the threaded receptacles on the underside of the base. Ensure all legs are tightened securely.
3. 매트리스 고정 막대를 부착하세요: Locate the retainer bar and insert its ends into the designated holes at the foot of the base.
4. 베이스 위치 지정: With assistance, carefully flip the base over and place it in its desired location.
5. 전원 연결: Plug the power cord into the power supply, then connect the power supply to the base. Finally, plug the power cord into a grounded electrical outlet.
6. Remote Control Pairing (if not pre-paired): Refer to the 'Operating Instructions' section for remote control pairing procedures if the remote does not immediately control the base.

작동 지침

Your Reverie R400 adjustable base is controlled by a wireless remote. Ensure the remote has fresh batteries and is paired with the base.

무선 원격 제어view

• HEAD LIFT (+/-): Press '+' to raise the head section; press '-' to lower it.
• FOOT LIFT (+/-): Press '+' to raise the foot section; press '-' to lower it.
• 평평한: Press to return both head and foot sections to a flat position.
• ANTI-SNORE: Press for a preset position designed to reduce snoring.
• MASSAGE HEAD (+/-): Press '+' to increase head massage intensity; press '-' to decrease.
• MASSAGE FOOT (+/-): Press '+' to increase foot massage intensity; press '-' to decrease.
• FULL BODY MASSAGE: Activates or deactivates full body massage.
• MASSAGE STOP: Stops all massage functions.
• PRESET BUTTONS (1, 2, 3): These buttons may be pre-programmed or programmable for your favorite positions. Consult the full manual for programming instructions if needed.

위치 조정

Use the HEAD LIFT and FOOT LIFT buttons to find your desired comfort position. The base will smoothly adjust to the selected angle.

마사지 기능

Activate the massage feature using the dedicated massage buttons on the remote. Adjust intensity for head and foot zones independently or select full body massage. Press 'STOP' to end the massage.

블루투스 연결

The Reverie R400 features Bluetooth connectivity, allowing control via a compatible mobile application. Refer to the Reverie website or app store for the official application and pairing instructions.

유지 보수 및 관리

To ensure the longevity and proper function of your Reverie R400 adjustable base, follow these care guidelines:

• 청소: Wipe the fabric and frame surfaces with a dry cloth. Avoid using liquid cleaners or abrasive materials that could damage the finish or electrical components.
• 검사: Periodically check all connections, including the power cord and leg attachments, to ensure they are secure.
• 모터 케어: The motors are designed for maintenance-free operation. Do not attempt to lubricate or open the motor housing.

문제 해결

If you experience issues with your Reverie R400 adjustable base, consult the following common troubleshooting steps:

• 전원 없음/베이스 응답 없음:
  • 전원 코드가 작동하는 콘센트에 단단히 꽂혀 있는지 확인하세요.
  • Check that the power supply is properly connected to the base.
  • Verify that the remote control batteries are fresh and correctly inserted.
  • If the remote is not paired, follow the pairing instructions (usually involves pressing a button on the control box under the base and then a button on the remote).
• 모터 소음:
  • Some motor noise during adjustment is normal. Excessive or unusual noise may indicate an issue.
  • Check for any obstructions under the base that might be interfering with the moving parts.
• Base Not Adjusting Evenly:
  • Ensure no objects are impeding the movement of the head or foot sections.
  • Check that the base is on a level surface.

If these steps do not resolve the issue, please contact Reverie customer support.

명세서

보증 및 지원

For specific warranty details, please refer to the warranty card included with your product or visit the official Reverie website. For technical support, replacement parts, or further assistance, please contact Reverie customer service through their official channels.