1. 서론
Thank you for choosing the Mabe 3-Tap Freestanding Water Dispenser. This manual provides important information regarding the installation, operation, and maintenance of your new appliance. Please read this manual thoroughly before using the water dispenser to ensure safe and efficient operation. Keep this manual for future reference.
중요한 안전 정보
- 청소 또는 유지 보수를 하기 전에 항상 디스펜서의 전원을 뽑으십시오.
- 손상된 전원 코드나 플러그로 디스펜서를 작동하지 마십시오.
- 분배기를 직사광선과 열원으로부터 멀리 두십시오.
- 장치 주변의 적절한 환기를 확인하십시오.
- Supervise children when they are near the hot water tap.
2. 제품 오버view
Familiarize yourself with the components of your Mabe water dispenser.
영상: 앞쪽 view of the Mabe 3-Tap Freestanding Water Dispenser. The dispenser is white, with a black control panel and three dispensing taps visible below the water bottle area. A storage cabinet is located at the bottom.
주요 구성 요소 :
- Water Bottle Support
- Control Panel (Power, Hot Water, Cold Water indicators)
- Hot Water Tap (often with a safety lock)
- Room Temperature Water Tap
- 냉수 꼭지
- 드립 트레이 및 그리드
- Storage Cabinet (at the base)
- Power Cord (at the rear)
- Drain Plugs (at the rear)
3. 설정 지침
3.1 풀기
Carefully remove all packaging materials from the water dispenser. Inspect the unit for any damage that may have occurred during shipping. If any damage is found, do not operate the unit and contact customer service.
3.2 배치
- Place the dispenser on a firm, level surface capable of supporting its weight when a full water bottle is installed.
- Ensure there is at least 10 cm (4 inches) of clearance from the back and sides of the unit to allow for proper ventilation.
- Avoid placing the dispenser in direct sunlight or near heat-generating appliances (e.g., ovens, dishwashers).
- Do not place the dispenser in an area where the temperature will drop below 10°C (50°F).
영상: A diagram illustrating the dimensions of the Mabe water dispenser. The height is 98.0 cm, width is 31.0 cm, and depth is 32.0 cm. The image also indicates a weight of 13.6 kg.
3.3 초기 청소
Before first use, wipe the exterior of the dispenser with a soft, damp cloth. Clean the drip tray and grid with mild soap and water. It is recommended to flush the internal tanks before first use (see Section 5.2 for draining instructions).
3.4 물병 설치
- Remove the protective seal from a standard 19-liter (5-gallon) water bottle.
- Carefully lift the water bottle and place it upright onto the water bottle support on top of the dispenser. Ensure the bottle is seated firmly and correctly. The bottle's cap will be pushed in, allowing water to flow into the dispenser's reservoirs.
3.5 전원 연결
Plug the power cord into a grounded electrical outlet. Allow the dispenser to stand for at least 30 minutes before turning on the heating and cooling functions. This allows the compressor lubricant to settle.
3.6 First Dispense
After plugging in and installing the water bottle, dispense at least 1 liter (approximately 4 cups) of water from each tap (hot, cold, and room temperature) to ensure the tanks are filled and to flush any air from the system. Do not activate the heating or cooling switches until water has been dispensed from all taps.
4. 사용 설명서
4.1 제어판
영상: 클로즈업 view of the Mabe water dispenser's control panel. It features three illuminated icons: a power symbol (circle with a vertical line), three wavy lines (indicating hot water), and a snowflake (indicating cold water). These icons likely serve as indicators or touch controls.
- Power Indicator (⏻): 장치의 전원이 켜지면 켜집니다.
- Hot Water Indicator (≋): Illuminates when the hot water heating function is active.
- Cold Water Indicator (❅): Illuminates when the cold water cooling function is active.
Switches for activating the hot and cold water functions are typically located on the back of the unit. Turn them ON to enable heating and cooling.
4.2 물 분배
- Place a cup or glass under the desired tap.
- 찬물용: Press the blue tap lever. The cold water indicator will be lit when the water is at its optimal cold temperature.
- 실온수의 경우: Press the middle tap lever.
- 뜨거운 물: This tap usually has a safety feature. Simultaneously press the safety lock button (often red) and the red tap lever. The hot water indicator will be lit when the water is at its optimal hot temperature. Exercise caution when dispensing hot water to prevent burns.
- 레버를 놓으면 물의 흐름이 멈춥니다.
5. 유지관리
5.1 정기 청소
- 외부: 부드러운 d로 외부 표면을 닦으십시오.amp 천으로 닦아주세요. 잘 지워지지 않는 얼룩에는 부드럽고 연마성이 없는 세제를 사용하세요.
- 드립 트레이: The drip tray should be emptied and cleaned regularly to prevent overflow and bacterial growth. Remove the grid, empty the tray, wash with mild soap and water, rinse thoroughly, and replace.
5.2 디스펜서 물 빼기
Draining is necessary for deep cleaning, storage, or moving the unit.
- 디스펜서를 전원 콘센트에서 뽑으세요.
- Remove the water bottle from the top.
- Place a large bucket or container under the drain plugs located at the back of the dispenser.
- Carefully remove the drain plugs (usually two: one for cold, one for hot) to allow water to drain completely from both tanks.
- Once drained, replace the drain plugs securely.
- For deep cleaning, you may flush the system with a mild sanitizing solution (e.g., diluted white vinegar) before rinsing thoroughly with clean water and draining again.
6. 문제 해결
고객 서비스에 문의하기 전에 일반적인 문제에 대한 다음 문제 해결 가이드를 참조하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 물 분사 없음 | Empty water bottle; Airlock in system | Replace water bottle; Dispense water from all taps to clear airlock. |
| Water not cold/hot | Cooling/heating switch off; Dispenser recently plugged in; Malfunction | Ensure switches are ON; Allow 15-30 minutes for temperature change; Contact support if issue persists. |
| 물이 새다 | Water bottle not seated correctly; Loose drain plug; Internal leak | Re-seat water bottle; Check and tighten drain plugs; Unplug and contact support. |
| 비정상적인 소음 | Normal compressor operation; Unit not level | Ensure unit is on a level surface. If noise is excessive or unusual, contact support. |
7. 사양
Technical details for the Mabe 3-Tap Freestanding Water Dispenser.
| 특징 | 세부 사항 |
|---|---|
| 상표 | 마베 |
| 모델 번호 | Emdpccb3 |
| 색상 | 하얀색 |
| 제품 크기(D x W x H) | 32 x 31 x 98cm(약 12.6 x 12.2 x 38.6인치) |
| 무게 | 13kg(약 28.6파운드) |
| 용량 | Designed for standard 19-liter (5-gallon) water bottles |
| 권tage | 1 Volt (Note: This value seems incorrect based on typical appliance voltage, please refer to product label for actual operating voltage) |
| 재료 | Polyester (likely referring to internal components or specific parts) |
| 소음 수준 | 1 Decibel (Note: This value seems exceptionally low and likely a placeholder, actual noise level will be higher) |
8. 보증 및 지원
Your Mabe water dispenser is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration. Keep your proof of purchase for warranty claims.
고객 지원
If you encounter any issues not covered in the troubleshooting section or require further assistance, please contact Mabe customer service. Contact information can typically be found on the product packaging, the Mabe official website, or your warranty documentation.
