GLEDOPTO GL-C-008P Zigbee 3.0 RGBCCT LED 스트립 컨트롤러 Pro 사용 설명서

1. 서론

This manual provides comprehensive instructions for the GLEDOPTO GL-C-008P Zigbee 3.0 RGBCCT LED Strip Controller Pro. It covers installation, operation, and troubleshooting to ensure optimal performance and seamless integration with your smart home system. Please read this manual thoroughly before using the product.

2. 제품 오버view

The GLEDOPTO GL-C-008P is a Zigbee 3.0 compatible controller designed for RGBCCT (Red, Green, Blue, Cool White, Warm White) LED strip lights. It enables smart control of your lighting through various Zigbee gateways and voice assistants, offering a wide range of colors and adjustable white light.

이미지 2.1: 앞면 view of the GLEDOPTO GL-C-008P Zigbee 3.0 RGBCCT LED Strip Controller Pro, showing its compact design and input/output labels.

주요 특징:

• Zigbee 3.0 호환성: Works with standard Zigbee 3.0 gateways such as Tuya Smart Hub, SmartThings Hub, and Philips Hue Hub.
• 음성 제어: Directly compatible with Amazon Echo Plus, Echo (4th Gen), Echo Studio, and Echo Show (2nd Gen) for voice commands without an additional gateway. Also supports Alexa Echo/Google Home via SmartThings or Tuya Zigbee hubs.
• 와이드볼tage 입력: Supports DC 12V, 24V, 36V, and 48V power supplies.
• 고성능 출력: Maximum total power of 270W and maximum output current of 5 Amps.
• Full Color & White Control: Offers 16 million colors, adjustable color temperature (Cool White to Warm White), and dimming from 1% to 100%.
• 그룹 제어: Allows control of multiple lights simultaneously by creating and assigning groups within your smart home application.

Image 2.2: Visual representation of the 16 million color options available with the controller.

3. 사양

4. 설정 및 배선

Proper wiring is crucial for the safe and correct operation of your LED strip controller. Always ensure the power supply is disconnected before making any electrical connections.

배선 지침:

1. 전선 준비: Strip approximately 9-10mm of insulation from the ends of your LED strip wires and power supply wires.
2. LED 스트립 연결하기: Connect the RGBCCT LED strip wires to the output terminals on the controller. The terminals are labeled V+, R, G, B, W, C. Ensure each wire corresponds to its correct terminal (e.g., Red to R, Green to G, Blue to B, Warm White to W, Cool White to C, and common positive to V+). The terminals are spring-loaded; use a small screwdriver to press down the tab, insert the wire, and release to secure.
3. 전원 공급 장치 연결: Connect your compatible DC power supply (12V-48V) to the input terminals on the controller, labeled V+ and V-. Ensure correct polarity (positive to V+, negative to V-).
4. 보안 연결: Gently tug on each wire to confirm it is securely fastened in its terminal. Loose connections can lead to intermittent operation or damage.
5. 전원 켜기: Once all connections are secure, connect your power supply to the mains electricity.

이미지 4.1: 상세 view of the controller's input (V+, V-) and output (V+, R, G, B, W, C) terminals for wiring LED strips and power supply.

5. 사용 설명서

After successful wiring and power-up, the controller is ready to be integrated into your smart home system. Control is primarily achieved through a Zigbee gateway and its associated application or voice commands.

Pairing with a Zigbee Gateway:

1. 페어링 모드 시작: To put the controller into pairing mode, quickly power cycle the device (turn off and on) five times within a few seconds. The connected LED strip or an indicator light on the controller should flash to confirm it has entered pairing mode.
2. 장치 검색: Open your Zigbee gateway's application (e.g., Tuya Smart, SmartThings, Philips Hue) and navigate to the device discovery or add device section. Follow the in-app instructions to search for new Zigbee devices.
3. 확인: Once successfully paired, the LED strip will typically stop flashing and may turn to a default color or brightness. The controller will appear in your gateway's device list.

Direct Pairing with Amazon Echo Plus/Echo (Built-in Zigbee Hub):

• Ensure your Amazon Echo Plus, Echo (4th Gen), Echo Studio, or Echo Show (2nd Gen) is powered on and connected to your Wi-Fi network.
• Initiate pairing mode on the GLEDOPTO controller as described above (power cycle five times).
• Say, "Alexa, discover devices." Alexa will begin searching for new smart home devices.
• Once discovered, the controller will appear in your Alexa app, and you can begin controlling your LED strip via voice commands.

이미지 5.1: Example of a smartphone application interface used to control LED strip colors and brightness.

Image 5.2: Illustration of voice control functionality with Amazon Alexa for adjusting LED lighting.

일반 작업:

• 색상 조정: Use your smart home app to select from 16 million colors.
• 백색광 조절: 색온도를 따뜻한 흰색에서 차가운 흰색으로 조정합니다.
• 디밍 : 밝기 레벨을 1%에서 100%까지 조절합니다.
• 켜기/끄기: Toggle the LED strip power through the app or voice commands.
• 그룹화: Create groups within your smart home app to control multiple controllers or lights simultaneously.

6. 유지관리

To ensure the longevity and proper functioning of your GLEDOPTO controller, follow these simple maintenance guidelines:

• 환경: Install the controller in a dry, indoor environment. Avoid exposure to moisture, direct sunlight, or extreme temperatures (outside -20 to +60°C).
• 청소: Clean the exterior of the controller with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• 통풍: Ensure adequate airflow around the controller to prevent overheating, especially when operating at high loads.

7. 문제 해결

If you encounter issues with your GLEDOPTO GL-C-008P controller, refer to the following common problems and solutions:

8. 보증 및 지원

GLEDOPTO products are designed for reliability and performance. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official GLEDOPTO website. For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact GLEDOPTO customer support or the retailer from whom you purchased the product. When contacting support, please have your model number (GL-C-008P) and purchase information readily available.