1. 서론
The NEEWER CB150 150W 5600K Dimmable LED Video Light is a professional-grade continuous output lighting solution designed for photography and videography. It features a powerful 150W LED bead, 5600K daylight color temperature, high CRI 97+, and 2.4G wireless remote control for versatile lighting setups. This manual provides essential information for safe and effective use of your new equipment.
2. 안전 지침
- Always ensure the power supply is disconnected before installation, adjustment, or maintenance.
- Do not operate the light in wet conditions or near flammable materials to prevent electric shock or fire.
- Avoid direct eye exposure to the LED light source, as it can cause eye strain or damage.
- Ensure proper ventilation around the light to prevent overheating and prolong product lifespan.
- Use only the provided power cable and accessories. Unauthorized modifications may void the warranty and pose safety risks.
- 기기를 어린이의 손이 닿지 않는 곳에 보관하세요.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- NEEWER CB150 LED Video Light Unit
- 2.4G 무선 원격 제어
- Standard Reflector (Light Funnel)
- 보호 커버
- 전원 케이블
- 사용 설명서
4. 제품 오버view
The NEEWER CB150 is a high-performance LED video light designed for consistent and accurate illumination. Key features include:
- Powerful 150W LED Bead: Provides stable and bright light output.
- 5600K 일광 색온도: Ensures natural and consistent lighting.
- High CRI 97+ and TLCI 97+: Guarantees accurate color rendition for broadcast video, photography, and studio filmmaking.
- 보웬스 마운트: Compatible with a wide range of light modifiers such as softboxes, beauty dishes, and snoots.
- 2.4G 무선 원격 제어: Allows adjustment of brightness and channels from up to 20 meters away.
- Ultra Silent Fan: Features smart temperature control for efficient heat dissipation with minimal noise.
- LCD 디스플레이: Large display panel shows key parameters like brightness, channel, and temperature.
제품 비디오 끝view
5. 설정
- 구성 요소 풀기: 모든 품목을 포장에서 조심스럽게 꺼내세요.
- 보호 커버 제거: Press the release button on the light unit and twist the protective cover counter-clockwise to remove it from the LED bead.
- 반사판 부착: Align the standard reflector (light funnel) with the Bowens mount on the light unit. Push it in and twist clockwise until it locks securely.
- 조명 스탠드에 장착: Loosen the knob on the light unit's mounting bracket. Place the light unit onto a compatible light stand (not included) and tighten the knob to secure it. Adjust the angle as needed.
- 전원 연결: Insert the power cable into the power input port on the back of the light unit. Plug the other end into a suitable power outlet.
6. 사용 설명서
전원 켜기/끄기
- Locate the power switch on the bottom of the light unit. Flip the switch to the 'ON' position to power on the light. The LCD display will illuminate.
- 전원을 끄려면 스위치를 'OFF' 위치로 돌리십시오.
밝기 조정
- Via Control Knob: Rotate the control knob on the back of the light unit to adjust brightness from 0% to 100%. The LCD display will show the current brightness percentage.
- Via 2.4G Wireless Remote: Use the '+' and '-' buttons on the remote control to adjust brightness. The remote allows for precise 1% increments.
Using the 2.4G Wireless Remote
- The remote control operates on 2.4G frequency and supports 10 channels (CH1-CH10) and a special channel CH88.
- Ensure the light unit and remote are set to the same channel for proper communication.
- Use the channel selection buttons on the remote to cycle through available channels.
- The remote can control the light from up to 20 meters away.
7. 유지관리
- 청소: Use a soft, dry cloth to clean the light unit. Do not use abrasive cleaners or solvents.
- 저장: When not in use, store the light in a cool, dry place, away from direct sunlight and moisture. Reattach the protective cover to the LED bead.
- 통풍: Regularly check that the ventilation openings are clear of dust and debris to ensure proper heat dissipation.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 조명이 켜지지 않습니다. | Power cable not connected properly; Power switch is off; Power outlet issue. | Check power cable connection; Ensure power switch is ON; Test with a different power outlet. |
| 리모컨이 작동하지 않습니다. | Remote batteries are low or depleted; Remote and light unit on different channels. | Replace remote batteries; Ensure both devices are set to the same channel (CH1-CH10 or CH88). |
| 빛이 과열되었습니다. | Blocked ventilation; Prolonged use at maximum power in a confined space. | Ensure ventilation openings are clear; Operate in a well-ventilated area; Reduce brightness if necessary. |
9. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 니 우어 |
| 모델 | CB150 (Item model number: 10098474) |
| 전력 출력 | 150와트 |
| 색온도 | 5600K(일광) |
| 연색지수(CRI) | 97+ |
| TLCI(텔레비전 조명 일관성 지수) | 97+ |
| 조도 | 13000럭스 @ 1m |
| 밝기 조정 | 0% - 100% |
| 무선 제어 | 2.4G Wireless Remote (10 Channels + CH88) |
| 마운트 유형 | 보웬 스 마운트 |
| 품목 무게 | 7.24파운드 |
| 패키지 크기 | 16.1 x 10.35 x 8.39 인치 |
| 한국어: | 191073055360 |
10. 보증 및 지원
For detailed warranty information, product registration, and technical support, please visit the official NEEWER web사이트를 방문하거나 고객 서비스 부서에 문의하세요. 보증 청구에 대비해 구매 증빙 자료로 구매 영수증을 보관하세요.
