매뉴얼+

소넬 MPI-540

Sonel MPI-540 다기능 전기 설비 계측기 사용 설명서

Model: MPI-540

1. 소개 및 이상view

The Sonel MPI-540 is a sophisticated multifunction electrical installation meter designed for comprehensive checking of home and industrial electrical installations. This device provides precise measurements to determine the safety and quality of electrical networks. It also offers the capability to register electrical network parameters, allowing for verification of electricity quality and assessment of protection against electric shock using a single, versatile instrument.

Key features include significant automation of measurements, enabling testing of residual current circuit breakers in Auto mode and through pre-programmed measuring sequences (auto-tests). These sequences can be customized. Additionally, automatic measurement of insulation resistance for 3-, 4-, and 5-wire conductors is possible with the optional AUTO ISO-1000C adapter.

소넬 MPI-540 다기능 전기 설비 계량기

Figure 1.1: The Sonel MPI-540 Multifunction Electrical Installation Meter, showcasin디스플레이 및 제어 인터페이스.

2. 제품 특징 및 기능

The MPI-540 offers a wide range of functionalities, making it an indispensable tool for electrical professionals.

2.1. Core Measurement Capabilities

  • Short circuit loop impedance (also in circuits with RCDs)
  • Parameters of RCDs
  • 절연 저항
  • Earth resistance (4 measurement methods + ground resistivity measurement)
  • Continuity of protective and equipotential bondings
  • 조명 측정
  • 상순 테스터
  • Motor rotation direction tester

2.2. Advanced Network Analysis

The device can record 50/60 Hz power network parameters in accordance with class S of EN 61000-4-30 standard:

  • 권tage (L1, L2, L3) - average values in the range up to 500 V
  • Current (L1, L2, L3) - average values, current measurement in the range up to 3 kA (depending on the current clamps used)
  • Frequency in the range of 40 Hz - 70 Hz
  • Active (P), reactive (Q) and apparent (S) power
  • Power factor (PF), cosφ
  • Harmonics (up to 40 in voltag전자 및 현재)
  • Total harmonic distortion (THD) for current and voltage

2.3. User Interface and Design

  • The largest 7-inch touch panel on the market, providing remarkable ergonomics and ease of use.
  • Removable memory card for easy increase of memory capacity.
  • Li-Ion battery for long-term operation.
  • Ability to add a voice memo or photo for measurement - a multimedia description of the measurement site.
  • Automatic measurement of insulation resistance of 3-, 4- and 5-wire conductors using the AUTO ISO-1000C adapter.
Sonel MPI-540 with included accessories

Figure 2.1: The MPI-540 meter shown with its comprehensive set of accessories, including various probes, clamps, 그리고 케이블.

2.4. Enhanced Durability and Communication

  • Increased resistance to environmental conditions: The MPI-540 meter is designed for difficult environmental conditions. Protection against penetration of dust and water is ensured by a unique housing with a level of protection IP51.
  • Communication and software: The device offers multiple communication interfaces (USB, portable USB memory card, or wireless communication (Bluetooth Wi-Fi)). It can generate reports on measurements for electric shock protection. Sonel PE5 program is used for saving the downloaded data to the simplest formats and printing.

3. 설정

Before operating the Sonel MPI-540, ensure proper setup to guarantee accurate and safe measurements.

3.1. 초기 점검 및 충전

  • Unpack the device and all accessories. Inspect for any visible damage.
  • Ensure the Li-Ion battery is fully charged before first use. Connect the charger to the device and a power outlet. The charging indicator will show the status.

3.2. Connecting Probes and Accessories

  • For basic measurements, connect the appropriate test leads (e.g., test lead 1.2 m, red, 1 kV) to the designated input terminals on the meter.
  • For specific measurements like insulation resistance of 3-, 4-, and 5-wire conductors, connect the optional AUTO ISO-1000C adapter as per its instructions.
  • When using current clamps for current measurements, ensure they are properly connected to the meter's input and clamped around the conductor.
User performing electrical measurements with Sonel MPI-540

Figure 3.1: An electrician using the MPI-540 to perform measurements within an electrical panel, demonstrating proper probe connection.

3.3. 메모리 카드 설치

  • Locate the memory card slot. Insert a compatible SD card (microSD 4GB is standard) to enable data logging and storage of measurement results.

4. 사용 설명서

The MPI-540 features an intuitive touch screen interface and automated measurement sequences for efficient operation.

4.1. Powering On and Navigation

  • 전원 버튼을 길게 눌러 장치를 켭니다.
  • Use the 7-inch touch screen to navigate through menus and select measurement functions.

4.2. 측정 수행

The meter supports various measurement modes, including manual and automated sequences.

4.2.1. Auto Mode for RCD Testing

  • Select the RCD test function from the main menu.
  • Choose "Auto mode" to perform a sequence of tests on residual current circuit breakers automatically. The device will guide you through the necessary connections and steps.

4.2.2. Pre-programmed Measuring Sequences (Auto-tests)

  • The device comes with pre-programmed auto-tests for common installation checks. Select the desired sequence from the menu.
  • Follow the on-screen prompts to connect the leads and initiate the test. The meter will automatically perform a series of measurements and display the results.
  • Users can also extend these with their own customized sequences.

4.2.3. Data Logging and Reporting

  • Measurement results can be saved to the internal memory or the inserted SD card.
  • Use the Sonel PE5 software on a computer to download, analyze, and generate reports from the stored data via USB or Bluetooth/Wi-Fi.

5. 유지관리

Proper maintenance ensures the longevity and accuracy of your Sonel MPI-540 meter.

5.1. 청소

  • Regularly clean the device's exterior with a soft, damp 천. 연마성 세척제나 용매를 사용하지 마십시오.
  • Ensure the display is clean for optimal readability.

5.2. 배터리 관리

  • Recharge the Li-Ion battery when the low battery indicator appears.
  • For long-term storage, ensure the battery is partially charged (around 50%) and store the device in a cool, dry place. Avoid extreme temperatures.

5.3. 보관

  • Store the meter and its accessories in the provided carrying case to protect them from dust, moisture, and physical damage.

5.4. 교정

  • To maintain measurement accuracy, it is recommended to have the MPI-540 calibrated periodically by an authorized Sonel service center. Refer to the official Sonel documentation for recommended calibration intervals.

6. 문제 해결

This section provides solutions to common issues you might encounter with your MPI-540 meter.

6.1. 장치 전원이 켜지지 않음

  • 배터리 확인: Ensure the Li-Ion battery is sufficiently charged. Connect the charger and allow it to charge for a period.

  • 배터리 연결: Verify that the battery is correctly inserted into its compartment.

  • 전원 버튼: 전원 버튼을 꾹 눌러 몇 초간 유지하십시오.

6.2. 부정확한 판독값

  • 프로브 연결: Ensure all test leads and probes are securely connected to the device and the circuit being tested.

  • 측정 모드 : Verify that the correct measurement function is selected for the task.

  • 환경 조건: Extreme temperatures or humidity can affect readings. Operate the device within its specified environmental limits.

  • 구경 측정: If readings are consistently off, the device may require recalibration. Contact Sonel service for assistance.

6.3. 데이터 전송 문제

  • USB 연결: Ensure the USB cable is properly connected to both the meter and the computer.

  • 소프트웨어 설치: Verify that the Sonel PE5 software is correctly installed on your computer.

  • 메모리 카드: Check if the SD card is properly inserted and not full or corrupted.

  • 블루투스/Wi-Fi: Ensure wireless communication is enabled on both the meter and the receiving device, and that they are paired correctly.

7. 사양

The following tables detail the technical specifications of the Sonel MPI-540 meter.

7.1. 일반 사양

매개변수값
상표소넬
모델MPI-540
전원배터리 구동(리튬이온)
표시하다7-inch TFT LCD touch screen (800x480 pixels)
보호 등급IP51
의사소통USB, Portable USB Memory Card, Bluetooth/Wi-Fi

7.2. Measurement of Short Circuit Loop Impedance Z엘-피 or Z엘엔

디스플레이 범위해결정확성
0.000...19.999 Ω0.001Ω±(5% mv + 3자리)
20.00...199.99 Ω0.01Ω±(2% mv + 3자리)
200...1999 Ω0.1Ω±(6% mv + 5자리)

참고: 정격 용량tage: 95...270 V, Frequency: 45...65 Hz.

7.3. Measurement of RCD Tripping Current IA

정격 전류Meas. Range레졸.테스트 전류정확성
10mA3.3...10.0 mA0.1mA0.5 x 나Δn±5% IΔn
30mA9.0...30.0 mA0.1mA0.5 x 나Δn±5% IΔn
100mA33.3...100 mA0.1mA0.5 x 나Δn±5% IΔn
300mA90...300 mA1mA0.5 x 나Δn±5% IΔn
500mA150...500 mA1mA0.5 x 나Δn±5% IΔn
1000mA330...1000 mA1mA0.5 x 나Δn±5% IΔn

Note: Measurement can be started from positive or negative half-period of forced leakage current (AC).

7.4. Three-Phase Electrical Network Parameters

매개변수측정 범위최대 해상도정확성
교대 권tag전자(TRMS)0.0...500 V0.01% 유이름±0.5% U이름
±2% m.v. for m.v. ≤ 10%
Alternating Current (TRMS)depending on clamp*0.01% 나이름±2% m.v. for m.v. ≤ 10%
±(error does not account for clamps error)
빈도40.00...70.00 Hz0.01Hz±0.05Hz
Active, Reactive, Apparent and Distortion Powerdepending on configuration (transformers, clamp)up to for decimal placesdepending on configuration (transformers, clamp)
Active, Reactive Apparent Energydepending on configuration (transformers, clamp)up to for decimal placesas power error
cosφ and Power Factor (PF)0.00...1.000.01±0.03
고조파(Voltage)as for alternating voltageas for alternating voltage±5% m.v. ± 3% U이름
고조파(전류)as for alternating voltageas for alternating voltage±5% m.v. ± 10% I이름
THD(볼륨tage)0.0...100.0% (in regard to sine RMS value)0.1%±5%
권tag전자 비대칭0.0...10.0%0.1%±0.15% (absolute error)

*Clamp F-1A, F-2A, F-3A, 0...3000 A (10000 A); Clamp C-4A, 0...1000 A (3600 A); Clamp C-6A, 0...10 A (36 A); Clamp C-7A, 0...100 A (360 A).

8. 보증 및 지원

Sonel provides support for its products to ensure customer satisfaction and product longevity.

8.1. 보증 정보

Specific warranty terms and conditions for the Sonel MPI-540 are typically provided with the product documentation at the time of purchase. Please refer to the warranty card or the official Sonel website for detailed information regarding warranty duration, coverage, and claims procedures.

8.2. 기술 지원

For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Sonel's authorized support channels. Contact information can usually be found on the Sonel official web사이트 또는 제품 포장.

  • 제조업체: 소넬
  • Web대지: www.sonel.pl (공식을 확인하세요 web(최신 연락처 정보 및 지원 자료는 해당 사이트를 참조하십시오.)

관련 문서 - MPI-540

사전view Sonel EVSE-01 사용 설명서: 차량 충전소 테스트용 어댑터
Sonel EVSE-01 어댑터에 대한 포괄적인 사용 설명서로, 전기차 충전소 테스트, 안전 예방 조치, 측정 절차 및 기술 사양을 자세히 설명합니다. 다양한 Sonel MPI 미터와 호환됩니다.
사전view Sonel MPI-520 / 520 Start: 전문가용 전기 시스템 측정기
Sonel MPI-520/520 Start는 전기 시스템 파라미터 측정을 위한 다기능 계측기입니다. 전기 설비의 시운전 및 안전 테스트에 이상적이며, 루프 임피던스, 누전차단기(RCD) 테스트, 절연 저항, 전력 분석 등 포괄적인 측정 기능을 제공합니다. IP54 보호 등급과 다양한 데이터 통신 기능을 갖추고 있습니다.
사전view Sonel MPI-502F, MPI-506, MPI-507 사용 설명서: 전기 설비 매개변수 측정기
이 사용 설명서는 Sonel MPI-502F, MPI-506, MPI-507 전기 설비 매개변수 계측기에 대한 포괄적인 지침을 제공합니다. Vol. 1의 작동, 안전 및 측정 절차에 대해 자세히 설명합니다.tag예를 들어, 주파수, 고장 루프 임피던스, RCD 테스트, 절연 저항 및 문제 해결입니다.
사전view Sonel MPI-502F, MPI-506, MPI-507 사용 설명서: 전기 설비 매개변수 측정기
Sonel MPI-502F, MPI-506, MPI-507 계측기에 대한 종합적인 사용 설명서입니다. 이 안내서는 이러한 전기 설비 매개변수 테스터의 안전, 작동, 측정 절차, 기술 사양 및 문제 해결 방법을 자세히 설명합니다.
사전view Sonel MPI-530 / MPI-530-IT 사용자 설명서: 전기 설치 파라미터 측정기
This user manual provides comprehensive guidance for the Sonel MPI-530 and MPI-530-IT meters. These advanced devices are engineered for accurate electrical installation parameter measurements, crucial for ensuring electrical safety and compliance with relevant standards. The manual details device operation, measurement procedures, safety precautions, technical specifications, and accessories.
사전view Sonel MPI-540 / MPI-540-PV 다기능 설치 테스터 - 기술 사양
소넬 MPI-540 및 MPI-540-PV 다기능 설치 테스터의 상세 기술 사양, 기능 및 액세서리(태양광 테스트 기능 및 네트워크 분석 기능 포함)에 대한 정보입니다.