1. 안전 정보
Please read all safety instructions before operating this device. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Ensure the power supply matches the device's requirements (120VAC, 60Hz).
- Do not exceed the maximum load of 15A/1875W.
- Keep the controller and probe away from water or excessive moisture, except for the waterproof probe tip.
- 기기를 분해하거나 개조하지 마십시오. 모든 정비는 자격을 갖춘 기술자에게 맡기십시오.
- Always unplug the controller from the power outlet before cleaning or performing maintenance.
- This device is equipped with overload protection. In case of an overload, the power output and screen display will automatically cut off to prevent damage.
Image 1.1: Overload Protection Feature. This image shows the iPower temperature controller with a visual indicator pointing to the power cord, emphasizing the 'OVERLOAD PROTECTED' text. It explains that in case of an overload, the power output and screen display will be cut off.
2. 제품 오버view
The iPower Professional Digital Heating and Cooling Temperature Controller is designed to maintain precise temperature control for various applications, including seed germination, reptile habitats, brewing, and greenhouse environments. It features dual outlets for simultaneous heating and cooling device control, a digital display, and a waterproof temperature probe.
2.1 패키지 내용
- iPower Digital Temperature Controller (Model GLCTRLHEATCOOL15)
- Waterproof Temperature Probe
- 사용자 설명서
2.2 주요 특징
- 이중 기능: Controls both heating and cooling devices simultaneously.
- 높은 정확도: Professional-grade waterproof temperature probe.
- 디지털 디스플레이: Dual readouts for measured (PV) and set (SV) temperatures.
- 단위 선택: Supports both Fahrenheit (°F) and Celsius (°C).
- 간편한 조작: Intuitive 6-button interface.
- 과부하 보호: Enhances safety by cutting power during overloads.
이미지 2.1: 앞면 View of the iPower Temperature Controller. This image displays the main unit of the iPower temperature controller, showing its digital display, control buttons, heating and cooling outlets, power cord, and the attached temperature probe.
Image 2.2: Independent Heating & Cooling Functionality. This image illustrates how the controller can manage both a heating device (represented by a sun icon) and a cooling device (represented by a snowflake icon) simultaneously through its dedicated outlets.
Image 2.3: LED Display and Power Indicators. This image highlights the clear and easy-to-read LED display of the controller, showing temperature readings and indicating the status of heating and cooling operations.
Image 2.4: Wide Range of Uses. This image displays various applications for the iPower temperature controller, including aquariums, greenhouses, seed germination, and reptile enclosures, demonstrating its versatility.
3. 설정
3.1 초기 배치
Place the controller in a dry, stable location. Ensure adequate ventilation around the unit.
3.2 장착(선택 사항)
The controller can be mounted on a wall using the two keyholes located on the back of the unit. Securely fasten the controller to a suitable surface using appropriate screws (not included).
Image 3.1: Wall Mounting Option. This image shows the iPower temperature controller mounted on a wall, highlighting the keyholes on the back for secure installation.
3.3 프로브 연결
Insert the temperature probe into the designated port on the controller. Position the probe in the environment where temperature monitoring and control are required. Ensure the probe tip is fully immersed or positioned correctly for accurate readings.
3.4 장치 연결
- Plug your heating device into the outlet labeled 'HEATING'.
- Plug your cooling device into the outlet labeled 'COOLING'.
- Plug the controller's power cord into a standard 120VAC, 60Hz electrical outlet.
4. 사용 설명서
The controller features a 6-button interface for easy programming:
- 힘: 기기를 켜거나 끕니다.
- 쪽으로: 값을 늘리거나 메뉴를 탐색합니다.
- 내려가는: 값을 감소시키거나 메뉴를 탐색합니다.
- 세트: Enters programming mode or confirms settings.
- CF/ST: Toggles between Celsius and Fahrenheit, or enters specific settings.
- CLR: Clears current input or exits programming mode.
4.1 전원 켜기/끄기
를 누르세요 힘 button to turn the controller on. Press and hold the 힘 버튼을 약 3초 동안 누르면 전원이 꺼집니다.
4.2 표시 값
- PV(공정가치): 프로브로 측정된 현재 온도를 표시합니다.
- SV(설정값): 설정한 목표 온도를 표시합니다.
4.3 Setting Temperature Units (°F/°C)
를 누르세요 CF/ST button to toggle the temperature display between Fahrenheit (°F) and Celsius (°C).
4.4 목표 온도 설정(SV)
- 를 누르세요 세트 button once. The SV display will begin to flash.
- 사용하세요 UP or 아래에 원하는 온도로 목표 온도를 조절할 수 있는 버튼이 있습니다.
- 를 누르세요 세트 button again to confirm the setting and exit programming mode.
4.5 Heating and Cooling Operation
Once the target temperature (SV) is set, the controller will automatically activate the heating or cooling outlet based on the current measured temperature (PV) and the set differential (hysteresis, typically pre-set). If PV is below SV, the heating outlet activates. If PV is above SV, the cooling outlet activates.
5. 유지관리
5.1 청소
- Always unplug the controller before cleaning.
- Wipe the controller's surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- The temperature probe can be cleaned with a damp cloth. Ensure it is dry before re-inserting into any environment.
5.2 보관
사용하지 않을 때는 컨트롤러를 직사광선과 극한 온도 변화를 피해 서늘하고 건조한 곳에 보관하십시오.
6. 문제 해결
If you encounter issues with your iPower Temperature Controller, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 컨트롤러의 전원이 켜지지 않습니다. | 전원 공급이 되지 않습니다. 전원 버튼이 제대로 눌리지 않았습니다. | Ensure the controller is securely plugged into a live outlet. Press and hold the 힘 버튼을 3초 동안 눌러 켜십시오. |
| Controller does not turn on automatically after a power outage. | This model requires manual restart after power interruption. | 전원이 꺼진 후tage, manually press and hold the 힘 button for 3 seconds to restart the unit. |
| 난방/냉방 장치가 작동하지 않습니다. | Device not plugged in; Temperature not within activation range; Controller overload. | Check if the device is properly plugged into the correct outlet. Verify the set temperature (SV) and current temperature (PV). Check for overload condition. |
| 온도 판독값이 부정확합니다. | Probe improperly placed; Damaged probe. | Ensure the probe is correctly positioned and clean. If readings remain inaccurate, the probe may need replacement. |
| Controller trips circuit breaker. | Overload; Faulty device connected. | 총 와트를 보장tage of connected devices does not exceed 1875W. Test devices individually to identify a faulty one. |
7. 사양
| 특징 | 사양 |
|---|---|
| 모델 번호 | GLCTRLHEATCOOL15 |
| 정격 볼륨tage | 120VAC, 60Hz |
| 최대 로딩 | 15A / 1875W, 1/2HP, TV-5 |
| Probe Working Temperature | -58 ~ 230°F(-50 ~ 110°C) |
| Controller Working Temperature | -40 ~ 176°F(-40 ~ 80°C) |
| 제품 치수 | 8.27 x 6.15 x 2.36 인치 |
| 품목 무게 | 1.45파운드 |
| 디스플레이 유형 | 액정표시장치 |
| 프로브 케이블 길이 | 75인치(대략) |
| 전원 케이블 길이 | 75인치(대략) |
Image 7.1: Controller Dimensions and Cable Lengths. This image provides a visual representation of the controller's physical dimensions (4.55" x 4.55" x 1.6") and the lengths of both the probe cable and power cable (75" each).
Image 7.2: Temperature Working Ranges. This image visually represents the working temperature ranges for both the controller (-40 to 176°F) and the probe (-58 to 230°F).
8. 보증 및 지원
iPower products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official iPower web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
For further assistance, you may contact iPower customer service through their official channels. Details are typically found on the product packaging or the manufacturer's web대지.
