소개
Thank you for choosing DAYBETTER Smart RGB LED Strip Lights. This manual provides essential information for the safe and efficient use of your new LED strip lights. These 50ft (two 25ft rolls) LED strips feature app control, IR remote control, music synchronization, and timing settings, allowing for versatile lighting in various indoor environments.
안전 정보
- 전원 공급 장치 볼륨을 확인하십시오.tage는 제품의 요구 사항(12V)과 일치합니다.
- Do not connect the LED strip to 24V or AC 220V power directly.
- Avoid folding or bending the LED strip at sharp angles to prevent damage.
- Keep the product away from water and high humidity environments as it is designed for indoor use only.
- LED 스트립을 가연성 물질로 덮지 마십시오.
- 청소 또는 유지 보수 전에 전원을 차단하십시오.
패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- 50ft (2 x 25ft) RGB LED Strip Lights
- IR 원격 제어
- 전원 어댑터
- LED 컨트롤러
- 사용자 설명서(본 문서)
Image: Contents of the DAYBETTER LED Strip Lights package, showing the LED rolls, remote, and power supply.
설정
1. 개봉 및 구성품 살펴보기view
Before installation, familiarize yourself with the components. The video below provides an unboxing overview.
Video: An unboxing of the DAYBETTER LED Strip Lights, showing the contents and initial setup steps.
2. 표면 준비
For optimal adhesion, ensure the installation surface is clean, dry, and smooth. Avoid rough or dusty surfaces.
- Clean the surface thoroughly with a dry cloth.
- 표면이 완전히 마를 때까지 기다린 후 다음 단계로 진행하십시오.
3. Connecting the LED Strip Lights
Follow these steps to connect the LED strip to the controller and power supply:
- Connect the LED strip to the LED controller. Ensure the arrows on both connectors align.
- Connect the LED controller to the power adapter.
- 전원 어댑터를 적절한 전원 콘센트에 꽂습니다.
Image: Step-by-step visual guide for connecting the LED strip components.
4. Installing the LED Strips
Carefully peel off the adhesive backing and press the LED strip firmly onto the prepared surface. Apply gentle pressure along the entire length to ensure good contact. Avoid stretching the strip during installation.
이미지: 전ample of DAYBETTER LED strip lights installed in a room, providing ambient lighting.
운영
1. 적외선 원격 제어
The included 24-key IR remote allows for basic control of your LED strip lights.
- 켜기/끄기: 조명을 켜거나 끕니다.
- 밝기 조정: 조명 강도를 높이거나 낮춥니다.
- 색상 선택: Choose from various static colors (Red, Green, Blue, White, Orange, Yellow, Cyan, Purple, etc.).
- 동적 모드: Select from modes like Flash, Strobe, Fade, and Smooth for automatic color changes.
Image: The IR remote control and smartphone app interface for controlling the LED lights.
2. 스마트 앱 제어
Enhance your experience by controlling the LED lights via the dedicated smartphone app. The app offers advanced features such as music synchronization and timing settings.
- 앱 다운로드: Scan the QR code provided in the package or search for "Apollo Lighting" or "Apollo Life" in your app store.
- 블루투스 연결 :
- 스마트폰에서 블루투스를 활성화하세요.
- Open the "Apollo Lighting" app. The app will automatically connect to the LED light strip.
- If connection fails, disconnect the power cord and Bluetooth receiver, then reconnect. Close and restart the app if necessary.
- 음악 동기화: The app allows the lights to change color and rhythm in sync with music played through your smartphone's microphone.
- 타이밍 설정: Set schedules to automatically turn the lights on/off or change colors at specific times.
Image: The music synchronization feature of the DAYBETTER LED light app in action.
유지
- 청소: Gently wipe the LED strip with a dry, soft cloth to remove dust. Do not use liquid cleaners.
- 저장: If storing the lights for an extended period, ensure they are clean, dry, and rolled neatly to prevent damage.
- 점착제: The adhesive is strong, but for long-term stability, especially on textured surfaces, additional clips or stronger adhesive may be required.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 표시등이 켜지지 않습니다. | Loose connection, no power, remote battery dead. | Check all connections, ensure power adapter is plugged in, replace remote battery. |
| 리모컨이 작동하지 않습니다. | Remote battery dead, IR receiver blocked, remote too far. | Replace remote battery, ensure clear line of sight to IR receiver, operate within range. |
| 앱이 조명에 연결할 수 없습니다. | Bluetooth off, app glitch, power cycle needed. | Ensure Bluetooth is enabled, close and restart the app, disconnect and reconnect power to the LED strip. |
| Lights are dim or inconsistent colors. | Power supply issue, damaged LED segment. | Ensure adequate power supply. If a segment is damaged, it may require replacement of the strip. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 데이베터 |
| 모델 번호 | DB50111524G-DAUS0D2 |
| 길이 | 50 Feet (2 x 25ft rolls) |
| LED 유형 | 5050 RGB LED Chips |
| 제어 방법 | 앱 제어, 적외선 리모컨 |
| 특별 기능 | Color Changing, Dimmable, Music Sync, Timer Function |
| 전원 | 코드식 전기 |
| 권tage | 12 볼트 |
| 왓tage | 54 와트 |
| 실내/실외 사용 | 실내 전용 |
| 재료 | LED (Shade Material: LED) |
보증 및 지원
DAYBETTER products are designed for quality and reliability. For warranty information, technical support, or any questions regarding your LED strip lights, please refer to the contact information provided on the product packaging or visit the official DAYBETTER web대지.
You can visit the official DAYBETTER store on Amazon for more products and support: DAYBETTER Amazon Store
