ADATA XPG GAMMIX S50 Lite PCIe Gen4x4 M.2 2280 SSD

1. 서론

This manual provides essential information for the installation, operation, and maintenance of your ADATA XPG GAMMIX S50 Lite PCIe Gen4x4 M.2 2280 Solid State Drive. The GAMMIX S50 Lite is designed to deliver next-generation performance with PCIe Gen4x4 interface, offering sustained read/write speeds up to 3900/3200 MB per second. It is backward compatible with PCIe 3.0 and features 3D NAND Flash memory for enhanced capacity and durability, making it ideal for gamers, overclockers, and PC enthusiasts.

Please read this manual thoroughly before proceeding with installation to ensure proper setup and optimal performance of your SSD.

2. 안전 정보

제품 손상이나 부상 방지를 위해 다음 안전 예방 조치를 준수하세요.

• Always disconnect power from your computer and discharge static electricity before handling internal components.
• Handle the SSD by its edges to avoid touching the gold connectors or components on the circuit board.
• SSD를 분해하거나 개조하지 마십시오. 그렇게 하면 보증이 무효화됩니다.
• Keep the SSD away from moisture, extreme temperatures, and direct sunlight.
• Ensure proper ventilation within your system to maintain optimal operating temperatures for all components, including the SSD.

3. 패키지 내용

패키지에 다음 품목이 포함되어 있는지 확인하십시오.

• ADATA XPG GAMMIX S50 Lite PCIe Gen4x4 M.2 2280 Solid State Drive
• (Optional: M.2 mounting screw, depending on motherboard accessories)

Figure 3.1: The ADATA XPG GAMMIX S50 Lite SSD shown in its retail box, highlighting the product's branding and key features.

4. 설정 및 설치

The XPG GAMMIX S50 Lite is an M.2 2280 form factor SSD, designed for easy installation into compatible motherboards. Ensure your motherboard supports PCIe Gen4x4 M.2 NVMe SSDs.

4.1. 설치 전 체크리스트

• A compatible motherboard with an available M.2 slot (Key M, 2280 size).
• 십자 드라이버입니다.
• An M.2 mounting screw and standoff (usually provided with your motherboard).
• 정전기 방지 손목 스트랩(권장).

4.2. 설치 단계

1. 전원 끄기 : Shut down your computer completely and disconnect the power cable from the power supply unit.
2. 열린 사건: 컴퓨터 케이스를 열어 마더보드에 접근하세요.
3. M.2 슬롯 찾기: 메인보드에서 사용 가능한 M.2 슬롯을 찾으세요. 일반적으로 끝에 나사 구멍이 있는 작은 가로 슬롯처럼 생겼습니다.
4. Standoff 설치: If not already present, install the M.2 standoff into the appropriate screw hole for the 2280 size.
5. SSD 삽입: Gently slide the XPG GAMMIX S50 Lite SSD into the M.2 slot at a 30-degree angle. The gold contacts on the SSD should align with the slot.
6. 보안 SSD: Once fully inserted, push the SSD down until it is parallel with the motherboard. Secure it with the M.2 mounting screw. Do not overtighten.
7. 케이스를 닫고 전원을 켜세요: Close your computer case, reconnect the power cable, and power on your computer.
8. 초기화 및 포맷: After booting into your operating system, you may need to initialize and format the new SSD through Disk Management (Windows) or Disk Utility (macOS) before it can be used. Refer to your operating system's documentation for detailed steps.

Figure 4.1: An M.2 SSD being installed into a compatible slot on a motherboard, demonstrating the simple insertion and securing process.

Figure 4.2: A direct overhead view of the ADATA XPG GAMMIX S50 Lite SSD, showcasing its sleek design and XPG branding.

5. 사용 설명서

Once installed and formatted, the XPG GAMMIX S50 Lite SSD operates as a high-speed storage device within your system. Its performance benefits include:

• Next-Generation Performance: Leveraging PCIe Gen4x4, the SSD provides significantly faster read/write speeds compared to SATA SSDs, enhancing system responsiveness, game loading times, and large file 이전.
• 효율적인 냉각: Equipped with a robust aluminum heatsink, the GAMMIX S50 Lite effectively dissipates heat, maintaining optimal performance even under heavy loads. This can reduce temperatures by up to 20%.
• 고급 캐싱: Utilizes dynamic SLC Caching and a DRAM Cache Buffer to achieve high random read/write IOPS, crucial for demanding applications like video editing, animation, and gaming.
• 향상된 내구성: Built with 3D NAND Flash and featuring a wide range of data protection and correction technologies (like LDPC and E2E Data Protection), ensuring high Total Bytes Written (TBW) for extended product lifespan.

Figure 5.1: Visual representation of the SSD's cooling efficiency, indicating a 20% temperature reduction due to its integrated heatsink.

Figure 5.2: An abstract diagram depicting the SLC Caching and DRAM Cache Buffer technologies at work within the SSD, enhancing its performance.

Figure 5.3: A graphic illustrating the 2TB storage capacity of the SSD, surrounded by various application icons, symbolizing its suitability for diverse uses like gaming and content creation.

6. 유지관리

SSDs generally require less maintenance than traditional hard drives. However, following these practices can help ensure longevity and optimal performance:

• 펌웨어 업데이트: Periodically check the official XPG/ADATA website for firmware updates for your S50 Lite SSD. Firmware updates can improve performance, stability, and compatibility.
• TRIM 명령: Ensure that the TRIM command is enabled in your operating system. TRIM helps the SSD manage its data more efficiently, preventing performance degradation over time. Modern operating systems typically enable TRIM by default for SSDs.
• 조각 모음을 피하세요: Do not defragment your SSD. Defragmentation is unnecessary for SSDs and can reduce their lifespan by causing unnecessary write cycles.
• 여유 공간을 유지하세요: While not strictly necessary, maintaining some free space on your SSD (e.g., 10-15%) can help with performance and wear leveling.
• 데이터 백업: Regularly back up important data. While SSDs are reliable, no storage device is immune to failure.

7. 문제 해결

If you encounter issues with your XPG GAMMIX S50 Lite SSD, refer to the following common troubleshooting steps:

7.1. 시스템에서 SSD가 감지되지 않음

• 연결 확인: Ensure the SSD is fully seated in the M.2 slot and the mounting screw is secure.
• BIOS/UEFI 설정: Enter your system's BIOS/UEFI settings. Verify that the M.2 slot is enabled and configured correctly (e.g., NVMe mode). Some motherboards may disable certain SATA ports when an M.2 SSD is installed.
• 드라이버 설치: Ensure your operating system has the necessary NVMe drivers. Windows 10/11 typically includes native NVMe support. For older OS versions, you might need to install specific drivers.
• 디스크 초기화: If detected in BIOS but not in OS, check Disk Management (Windows) or Disk Utility (macOS) to see if the drive needs to be initialized and formatted.
• 마더보드 호환성: Confirm your motherboard's M.2 slot supports PCIe Gen4x4 NVMe SSDs.

7.2. 느린 성능

• PCIe 슬롯: Ensure the SSD is installed in a PCIe Gen4x4 compatible M.2 slot. Using a Gen3 slot will limit performance.
• TRIM 활성화됨: Verify that the TRIM command is enabled in your operating system.
• 펌웨어: Check for and install the latest firmware updates from the XPG/ADATA web대지.
• 온도: High temperatures can cause thermal throttling. Ensure adequate airflow in your PC case. The integrated heatsink helps, but overall system cooling is important.
• 백그라운드 프로세스: 디스크 I/O를 과도하게 사용하는 불필요한 백그라운드 애플리케이션을 종료하십시오.

If problems persist, contact XPG/ADATA customer support for further assistance.

8. 사양

Note: Performance figures may vary based on SSD capacity, host hardware, software, and system usage.

9. 보증 및 지원

XPG products are manufactured to the highest standards and undergo rigorous testing. This product is covered by a limited warranty from the date of purchase. The specific warranty period and terms may vary by region and product type. Please refer to the official XPG/ADATA web가장 최신의 자세한 보증 정보는 사이트에서 확인하세요.

For technical support, driver downloads, firmware updates, or warranty claims, please visit the official XPG support web대지:

XPG Official Support Web대지

When contacting support, please have your product model number (S50 Lite) and serial number ready.