1. 서론
Thank you for choosing the Sygonix RSL Wireless Socket Set. This set includes three remote-controlled sockets and one remote control, designed to provide convenient wireless control over your electrical appliances. This manual provides essential information for safe and efficient use, including setup, operation, maintenance, and troubleshooting.
패키지 내용
- 3 x Sygonix RSL Wireless Sockets
- 1 x 원격 제어
- 1 x CR2032 Battery (for remote control)
- 1 x 사용 설명서(이 문서)
주요 특징
- Wireless control of up to 3 devices.
- Compatible with other Sygonix RSL 433MHz transmitters (e.g., models 1761736, 1761748, 1761740, 1761732, 1761735, 1761752, 1761744).
- Maximum output power of 1000 W per socket.
- LED indicators for operational and pairing status.
- Enhanced touch protection.
- 과부하 및 과열 보호.
- 작동 주파수: 433.92MHz.
- Remote control with up to 12 channels and LED transmission indicator.
- 개방된 환경에서 최대 30미터의 작동 범위를 제공합니다.
Image 1.1: The Sygonix RSL Wireless Socket Set, showing three sockets and the remote control.
2. 안전 지침
Please read these safety instructions carefully before using the device. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- 실내에서만 사용 가능: This product is designed for indoor use in dry environments. Do not expose to moisture, rain, or extreme temperatures.
- 부하: Do not exceed the maximum output power of 1000 W per socket. Overloading can cause overheating and fire hazards.
- 권tage: Ensure the connected devices operate within the specified voltage range of 230 V/AC.
- 어린이들: Keep the device and remote control out of reach of children. The product features enhanced touch protection, but supervision is always recommended.
- 손상: Do not operate the device if it is damaged. Disconnect it from the power supply immediately and contact qualified personnel for repair.
- 분해 : Do not attempt to disassemble or modify the device. This will void the warranty and may pose safety risks.
- 배터리 안전: The remote control uses a CR2032 button cell battery. Keep batteries away from children. If swallowed, seek immediate medical attention. Dispose of used batteries responsibly.
3. 설정
3.1 리모컨 배터리 설치
- 리모콘 뒷면에서 배터리함을 찾으세요.
- 구획 덮개를 엽니다.
- CR2032 배터리의 양극(+) 부분이 위를 향하도록 삽입하십시오.
- 배터리 덮개를 단단히 닫으세요.
3.2 Pairing Sockets with the Remote Control
Each socket needs to be paired with the remote control to function. The remote control supports up to 12 channels.
- Plug the wireless socket into a wall outlet. The LED indicator on the socket will flash slowly.
- Within 5 seconds of plugging in the socket, press the desired "ON" button (e.g., 1 ON, 2 ON, 3 ON) on the remote control.
- The LED indicator on the socket will flash rapidly and then turn solid, indicating successful pairing.
- Repeat this process for each wireless socket you wish to pair.
- To unpair a socket, plug it into a wall outlet, and within 5 seconds, press the corresponding "OFF" button on the remote control. The LED will flash rapidly and then turn off.
Image 3.1: A hand operating the remote control, demonstrating wireless functionality with a socket.
4. Operating the Wireless Sockets
Once paired, you can control your connected devices using the remote control.
4.1 개별 통제
- To turn on a device connected to a specific socket, press the corresponding "ON" button (e.g., 1 ON) on the remote control. The LED on the socket will illuminate.
- To turn off a device connected to a specific socket, press the corresponding "OFF" button (e.g., 1 OFF) on the remote control. The LED on the socket will turn off.
4.2 그룹 제어
- To turn on all paired devices simultaneously, slide the switch on the remote control to "ALL ON".
- To turn off all paired devices simultaneously, slide the switch on the remote control to "ALL OFF".
The remote control has an LED transmission indicator that lights up when a button is pressed, confirming signal transmission.
The maximum operating range is 30 meters in an open field. Obstacles such as walls, furniture, and other electronic devices may reduce this range.
5. 유지관리
5.1 청소
- Before cleaning, ensure the sockets are unplugged from the wall outlets and no devices are connected.
- 부드럽고 마른 보풀 없는 천으로 기기를 닦으세요.
- 연마성 세척제, 용제 또는 독한 화학 물질은 표면을 손상시킬 수 있으므로 사용하지 마십시오.
- Do not immerse the devices in water or any other liquid.
5.2 배터리 교체
If the remote control's range decreases or the LED transmission indicator does not light up, the CR2032 battery may need replacement. Follow the steps in Section 3.1 to replace the battery.
6. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 소켓이 리모컨에 반응하지 않습니다. |
|
|
| 연결된 기기가 켜지거나 꺼지지 않습니다. |
|
|
| 작동 범위가 감소했습니다. |
|
|
7. 사양
| 특징 | 사양 |
|---|---|
| 모델 번호 | SY-4532434 |
| ASIN | B08HT3T2SC |
| 상표 | 시고닉스 |
| 소켓 수 | 3 |
| Max. Output Power per Socket | 1000와트 |
| 작동 주파수 | 433.92MHz |
| Max. Range (open field) | 30분 |
| 전원 공급 장치 | 230V/에어컨 |
| 채널 수 (원격) | 12 |
| 리모컨 배터리 | CR2032 (포함) |
| 위치 | 실내 |
| 장착 유형 | 플러그인 소켓 |
| 색상 | 하얀색 |
| 패키지 크기 | 49 x 41.2 x 15.1cm |
| 패키지 무게 | 26kg |
이미지 7.1: 앞면과 뒷면 views of a single Sygonix RSL wireless socket.
8. 보증 및 지원
8.1 보증 정보
This product comes with a minimum 2-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or failure to follow the instructions in this manual.
8.2 고객 지원
For technical assistance, troubleshooting beyond the scope of this manual, or warranty inquiries, please refer to the contact information provided with your purchase or visit the official Sygonix website. Please have your model number (SY-4532434) and proof of purchase ready when contacting support.
