iKonix Juki 산업용 잠금 스티치 DDL8100e 재봉틀 사용 설명서

1. 서론

This manual provides essential information for the safe and efficient operation of your iKonix Juki Industrial Lockstitch DDL8100e Sewing Machine. Please read all instructions carefully before assembly and operation to ensure proper use and longevity of the machine.

2. 안전 정보

• Always disconnect the power supply before cleaning, servicing, or when the machine is not in use.
• Keep hands and fingers away from the needle area and moving parts during operation.
• Use only recommended needles and threads for optimal performance and to prevent damage.
• 기계가 안정적이고 평평한 표면에 놓여 있는지 확인하십시오.
• 부품이 손상되었거나 누락된 경우 기계를 작동하지 마십시오.

3. 패키지 내용

The iKonix Juki DDL8100e package includes the following components. Please verify all items are present upon unboxing.

• Juki DDL8100e Machine Head
• Industrial Sewing Machine Table
• Electronic DC Servo Motor (3/4 H.P, 1 PHASE, 110 VOLT, 0 ~3300 RPM)
• 보빈 와인 더
• 스레드 스탠드
• 기계유
• 사용 설명서(본 문서)
• 오일 팬
• 무릎 리프터
• V 벨트
• 서랍
• 도구
• LED 엘amp

Figure 3.1: Various accessories included with the machine.

4. 조립 설명서

메모: Professional assembly may be required. The machine comes unassembled. Follow these steps carefully.

1. 테이블 스탠드를 조립하세요: Connect the table legs and crossbars to form a sturdy stand. Ensure all bolts are tightened securely.
2. 테이블탑 설치: Place the tabletop onto the assembled stand. Align the pre-drilled holes and secure the tabletop using the provided screws.
3. Install the Machine Head: Carefully lower the Juki DDL8100e machine head into the cutout on the tabletop. Ensure it sits flush and is stable.
4. Attach the Servo Motor: Mount the Electronic DC Servo Motor underneath the tabletop, aligning it with the machine head's pulley. Secure it with the provided hardware. Connect the V-belt between the motor pulley and the machine head pulley.
5. Install Knee Lifter and Oil Pan: Attach the knee lifter mechanism and the oil pan according to the diagrams in the detailed manual. The knee lifter allows for hands-free presser foot lifting.
6. Set up Thread Stand and Bobbin Winder: Assemble the thread stand and place it behind the machine. Install the bobbin winder on the machine head as indicated.
7. LED L 연결amp: LED 부착 lamp to provide illumination to the sewing area.

Figure 4.1: Fully assembled Juki DDL8100e industrial sewing machine with table and motor.

Figure 4.2: Close-up of the servo motor mounted beneath the machine table.

그림 4.3: View of the knee lifter and other components under the sewing table.

그림 4.4: 차원view of the assembled sewing machine.

5. 사용 설명서

5.1. 기계에 실 끼우기

Refer to the detailed threading diagrams in your included instruction manual for precise steps. Proper threading is crucial for consistent stitch quality.

Figure 5.1: Close-up of the machine head, showing the upper threading path.

5.2. 보빈 와인딩

The machine features an integrated bobbin winder. Place an empty bobbin onto the winder spindle, guide the thread as instructed, and engage the winder. The large M-style industrial bobbin allows for extended sewing without frequent changes.

5.3. 바느질 길이 조절

The maximum stitch length is 5 mm. Adjust the stitch length dial on the machine head to achieve the desired stitch size for your material.

5.4. 노루발 들어올리기

The presser foot can be lifted by hand (max. 5.5 mm) or by using the knee lifter (max. 13 mm). This high lift capacity is beneficial for handling thicker materials.

5.5. Servo Motor Speed Control

The Electronic DC Servo Motor offers variable speed control from 0 to 3300 RPM, allowing for precise speed adjustments suitable for various sewing tasks and materials.

6. 유지관리

정기적인 유지 관리는 재봉틀의 수명과 최적의 성능을 보장합니다.

• 주유: The machine features an auto-lubricating full rotary hook. Regularly check the oil level in the oil pan and refill with machine oil as needed. Refer to the oil level indicators (HIGH/LOW).
• 청소: Keep the machine head and surrounding area clean from lint and dust. Use a soft brush or cloth.
• 바늘 교체: Replace needles regularly, especially when working with different materials or if the needle shows signs of wear. Recommended needles: 9-18 DBX1 (16x231) up to size 19.

7. 문제 해결

문제가 발생할 경우 다음의 일반적인 문제 해결 팁을 참조하십시오.

• 건너뛴 스티치: Check if the needle is inserted correctly, if it's bent or dull, or if the threading is correct.
• 실 끊어짐: Inspect the thread path for obstructions, ensure proper tension, and check for burrs on the needle or machine parts.
• 고르지 않은 스티치: Verify correct tension settings for both upper and bobbin threads. Ensure the presser foot pressure is appropriate for the fabric.
• 기계가 시작되지 않음: Check power connections, ensure the motor switch is on, and verify the V-belt is properly engaged.
• 물리적 손상: Upon receiving the product, inspect all components for any shipping damage. Contact your seller immediately if damage is found.

8. 사양

Figure 8.1: Manufacturer specifications for the Juki DDL-8100A (similar to DDL8100e).

9. 보증 및 지원

For warranty information and technical support, please refer to the documentation provided with your purchase or contact iKonix customer service directly. Keep your proof of purchase for any warranty claims.