LITEPUTER CX1C DMX Tester User Manual

1. 서론

The LITEPUTER CX1C DMX Tester is a compact and essential tool for professionals working with DMX512 lighting control systems. It is designed to quickly and accurately test DMX signals, helping to diagnose issues with DMX lines, fixtures, and controllers. This manual provides comprehensive instructions for the safe and effective use of your CX1C DMX Tester.

2. 안전 정보

기기는 항상 건조한 환경에서 작동하십시오. 습기나 액체에 노출되지 않도록 하십시오.
c를 열지 마세요asing of the device. Refer all servicing to qualified personnel.
Use only the specified power adapter (DC 12V) to prevent damage to the unit.
작동 중에는 장치 주변에 적절한 환기가 이루어지도록 하세요.
장치를 강한 자기장에서 멀리 두십시오.

3. 제품 오버view

The LITEPUTER CX1C DMX Tester features a clear LCD display and intuitive controls for easy operation. It supports 5-pin DMX connections.

그림 3.1: 전면 View of the LITEPUTER CX1C DMX Tester. This image shows the main unit with its LCD screen and control buttons, including DMX IN, FUNC, DMX OUT, and LEVEL controls.

3.1 전면 패널 컨트롤

LCD 디스플레이: Shows DMX channel values, menu options, and status information.
DMX IN Indicator: Illuminates when a DMX signal is detected at the input.
FUNC 버튼: Used to cycle through different functions and menu options.
DMX OUT Indicator: Illuminates when the tester is generating a DMX output signal.
LEVEL Buttons (+/-): Used to adjust DMX channel levels or navigate menu options.

3.2 후면 패널 연결

LITEPUTER CX1C DMX Tester rear view 포트가 있는

그림 3.2: 후면 View of the LITEPUTER CX1C DMX Tester. This image displays the rear panel, highlighting the DC 12V power input, DMX IN and DMX OUT ports (both RJ45 and 5-pin XLR connectors), and pinout diagrams.

DC 12V 입력: Power connection port for the unit.
DMX IN (RJ45 & 5-pin XLR): Ports for receiving DMX signals from a controller or upstream device.
DMX OUT (RJ45 & 5-pin XLR): Ports for sending DMX signals to fixtures or downstream devices.

3.3 포함 된 액세서리

Figure 3.3: LITEPUTER CX1C DMX Tester Accessories. This image shows typical accessories that may be included with the DMX tester, such as a power cable and XLR adapters, facilitating various connection types.

The CX1C DMX Tester typically includes a power adapter and may come with various DMX adapters (e.g., 3-pin to 5-pin XLR) to ensure compatibility with different DMX setups.

4. 설정

Follow these steps to set up your LITEPUTER CX1C DMX Tester:

전원 연결: Connect the provided DC 12V power adapter to the DC 12V input port on the rear panel of the CX1C. Plug the adapter into a suitable power outlet.
DMX 입력 연결: If you are testing an incoming DMX signal, connect your DMX cable from the DMX source (e.g., lighting console) to either the DMX IN RJ45 or 5-pin XLR port on the rear panel.
DMX Output Connection (Optional): If you intend to generate a DMX signal from the tester to control fixtures, connect a DMX cable from either the DMX OUT RJ45 or 5-pin XLR port to your DMX fixtures.
전원 켜기: The device should power on automatically once connected to power. The LCD display will illuminate.

5. 사용 설명서

5.1 Basic DMX Signal Testing (Input)

Ensure a DMX source is connected to the DMX IN port.
The DMX IN indicator light should illuminate, confirming a signal is present.
Use the FUNC button to navigate to the 'DMX Monitor' or 'Channel View' mode (exact naming may vary based on firmware).
The LCD will display the DMX values for each channel. Use the LEVEL +/- buttons to scroll through channels or pages of channels.

5.2 DMX Signal Generation (Output)

Connect the DMX OUT port to your DMX fixtures.
Use the FUNC button to navigate to a 'DMX Output' or 'Test Pattern' mode.
In this mode, you can typically select a specific DMX channel and adjust its level using the LEVEL +/- buttons.
The DMX OUT indicator light should illuminate, confirming a signal is being generated.
Some modes may allow for generating test patterns (e.g., all channels at full, chase patterns) to quickly test fixture responses. Refer to the on-screen menu for available options.

5.3 고급 기능

The CX1C may offer additional functions such as:

케이블 테스트 : Checks the continuity and wiring of DMX cables.
DMX Timing Analysis: Provides information on DMX packet timing.
Fixture Addressing: Assists in setting DMX addresses for fixtures.

Navigate through these functions using the FUNC button and follow the on-screen prompts.

6. 유지관리

청소: 부드럽고 마른 천을 사용하여 기기 외부를 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
저장: Store the CX1C in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
케이블 검사: Regularly inspect DMX cables and power adapters for any signs of wear or damage. Replace damaged cables immediately.

7. 문제 해결

기기의 전원이 켜지지 않습니다:
- Ensure the DC 12V power adapter is securely connected to both the device and a working power outlet.
- 전원 콘센트가 작동하는지 확인하세요.
No DMX IN signal detected:
- Check the DMX cable connection between the source and the CX1C.
- Verify that the DMX source (e.g., console) is powered on and transmitting a signal.
- Test the DMX cable for continuity using the CX1C's cable test function if available, or another known good cable.
DMX OUT signal not controlling fixtures:
- Ensure the DMX OUT cable is correctly connected to the fixtures.
- Verify that the fixtures are powered on and correctly addressed.
- Check the DMX output settings on the CX1C to ensure a signal is being generated on the correct channels.
- Ensure the fixtures are terminated correctly if they are at the end of a DMX chain.

8. 사양

모델: CX1C
기능: DMX Tester
DMX 연결: 5-pin XLR and RJ45
치수(폭 x 높이 x 깊이): 97mm x 135mm x 38mm
무게: 750g
전원 입력: 직류 12V

9. 보증 및 지원

LITEPUTER products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your product or contact your authorized LITEPUTER dealer. For technical support, troubleshooting assistance, or service inquiries, please contact LITEPUTER customer service or visit the official LITEPUTER web대지.

LITEPUTER CX1C