BLUEAIR 공기청정기 DustMagnet 5440i 사용 설명서

1. 서론

The BLUEAIR DustMagnet 5440i is an advanced air purifier designed to enhance indoor air quality by effectively removing airborne particles and odors. Featuring patented DustMagnet technology and HEPASilent filtration, it provides efficient air cleaning with minimal noise. This manual provides essential information for setting up, operating, and maintaining your air purifier.

주요 특징:

• DustMagnet Technology: Captures 99% of airborne dust before it settles on surfaces.
• HEPASilent Filtration: Delivers up to 45% faster cleaning and up to 67% less noise than traditional HEPA filtration alone.
• 넓은 방 커버리지: Cleans up to 1,713 sq ft in 60 minutes (or 357 sq ft in 12.5 minutes).
• 스마트 기능: In-app real-time tracking, Auto mode, Night Mode, Welcome Home feature, and voice control compatibility with Amazon Alexa.
• 냄새 제거: Integrated carbon filter effectively traps household odors from pets, cooking, and smoking.
• 조용한 작동: Certified Quiet Mark approved, operating as low as 30 dB.
• 에너지 효율성: ENERGY STAR rated, using as little as 7W on low.

Figure 1: The BLUEAIR DustMagnet 5440i Air Purifier.

2. 설정 지침

2.1 언박싱 및 초기 배치

Carefully remove the air purifier from its packaging. Ensure all packing materials are discarded. The unit is designed to be placed on the floor. Consider the dimensions of the unit (11.4"D x 11.4"W x 21.3"H) when choosing a location.

그림 2: 최적의 배치를 위한 제품 치수.

For optimal performance, place the air purifier in a central location within the room. Avoid placing it directly against walls or in corners, as the unit draws air from multiple sides. Maintain at least six inches of clearance from walls to ensure proper airflow. Avoid direct sunlight exposure.

2.2 필터 준비

Before first use, the protective plastic wrapping must be removed from the filters. Open the filter compartment (refer to the maintenance section for details on accessing filters) and carefully unwrap each filter. Reinsert the filters into their designated slots.

2.3 Powering On and Initial Calibration

1. 전원 코드를 벽면 콘센트에 꽂으세요.
2. 제어판의 전원 버튼을 누릅니다.
3. Set the unit to Auto mode. The air purifier will automatically begin to sense and display the air quality.
4. Allow up to 24 hours for the air quality sensor to fully calibrate and provide accurate readings. During this initial period, the PM2.5 display might show dashes or inconsistent numbers.

제품 개봉 및 초기 설정에 대한 시각적 가이드는 아래 영상을 참조하세요.

3. 사용 설명서

3.1 제어판 이상view

Figure 3: Control panel with touch buttons and LED indicators.

The control panel on top of the unit features touch-sensitive buttons and LED indicators for various functions:

• 전원 버튼: 장치를 켜거나 끕니다.
• 야간 모드: Lowers fan speed and dims LED lights for undisturbed sleep.
• 자동 모드(A): 감지된 공기 질에 따라 자동으로 팬 속도를 조절합니다.
• 팬 속도: Manually adjust fan speed (multiple levels).
• PM Display: Shows real-time particulate matter (PM2.5, PM10, PM1) levels.
• 필터 교체 경고: Indicates when filters need to be replaced.
• Wi-Fi 표시기: Wi-Fi 연결 상태를 보여줍니다.

3.2 공기질 표시등

A color-changing LED light on the front of the unit provides a quick visual indication of the current air quality:

• 녹색: 좋은 공기질.
• 파란색: 대기질은 보통 수준입니다.
• 노란색 : Polluted air quality.
• 빨간색: Very polluted air quality.

3.3 스마트 기능 및 앱 제어

The BLUEAIR DustMagnet 5440i can be controlled and monitored via the Blueair app, available for iOS and Android devices. The app unlocks advanced features:

• 스마트 센서: Track levels of coarse particles like dust, pollen, mold spores, ash, and fine particles like smoke, viruses, and bacteria.
• 깨끗한 공기 예상 도착 시간: Counts down the time until clean air is achieved when pollutant levels are high.
• 집에 오신 것을 환영합니다: Automatically sets the air purifier to standby when you leave home and turns it back on before you return.
• 야간 모드: Lowers fan speed and dims LED lights for uninterrupted sleep.
• 음성 제어: Amazon Alexa 및 Google Home과 호환되어 핸즈프리로 작동할 수 있습니다.

For a demonstration of the control panel and air quality monitoring, refer to the video below:

4. 유지관리

4.1 필터 교체

The DustMagnet 5440i uses combo-filters that include a particle filter and integrated carbon. These filters should be replaced approximately once a year, depending on usage and air quality. The unit will indicate when a filter replacement is due via the control panel and the Blueair app.

4.2 Accessing and Replacing Filters

1. Ensure the air purifier is turned off and unplugged before attempting any maintenance.
2. Locate the filter access points on the unit. The DustMagnet 5440i typically has two filters, one at the top and one at the bottom.
3. Carefully open the filter compartment(s) and remove the old filters.
4. Insert the new filters, ensuring they are correctly oriented.
5. Close the filter compartment(s) securely.
6. Plug the unit back in and turn it on. Reset the filter timer if prompted by the app or control panel.

For a visual guide on accessing and replacing filters, refer to the video below:

5. 문제 해결

If you encounter any issues with your BLUEAIR DustMagnet 5440i, please refer to the following common troubleshooting steps:

• 장치 전원이 켜지지 않음: 전원 코드가 본체와 작동하는 콘센트에 제대로 꽂혀 있는지 확인하십시오.
• 이상한 소음: Check if filters are correctly installed and free from obstructions. Ensure the unit is placed on a stable, level surface.
• Air quality not improving: Verify that filters are clean and not overdue for replacement. Ensure the unit is operating in an appropriate mode (e.g., Auto mode or a higher manual fan speed). Check for any external factors affecting air quality (e.g., open windows, strong odor sources).
• 앱 연결 문제: Ensure your Wi-Fi network is active and the unit is within range. Restart both the air purifier and your mobile device. Follow the app's instructions for re-pairing if necessary.

For persistent issues, please contact BLUEAIR customer support.

6. 사양

7. 보증 및 지원

For warranty information, technical support, or any inquiries regarding your BLUEAIR DustMagnet 5440i Air Purifier, please visit the official BLUEAIR web사이트를 방문하거나 고객 서비스 부서에 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

자세한 정보와 지원 리소스는 다음에서 찾을 수 있습니다. BLUEAIR Store.