1. 제품 오버view
The NOCO GENPRO10X1 is a fully-sealed, waterproof onboard battery charger designed for a single 12-volt battery, delivering 10 amps. It is suitable for charging and maintaining various battery types, including lead-acid (flooded, AGM, gel) and lithium-ion (LiFePO₄) batteries. This re-engineered charger is 27% smaller and offers 19% more power than its predecessor, making it a compact and powerful solution for marine and outdoor environments.
비디오 설명: 공식 제품이 출시되었습니다view 비디오 쇼asing the NOCO Genius GENPRO10X1 charger, highlighting its compact design, waterproof features, and versatile charging capabilities for marine applications.
2. 패키지 내용
- GENPRO10X1 10A 1뱅크 스마트 방수 선박용 배터리 충전기 및 배터리 유지 관리기 (120-240VAC)
- 선박용 배터리 충전기 사용 설명서
- (2) 검정색 트러스 헤드 나사
3. 주요 특징
- 컴팩트하고 강력함: 41% smaller and 33% more powerful than the GEN1, engineered for harsh marine environments.
- Single Bank Charging: 10에서 평가 amps for a single 12V battery, ideal for marine, boat, starter, and deep-cycle systems.
- Versatile Charging Modes: Selectable modes for 12V, 12V AGM, 12V Lithium, and 12V Repair Mode, allowing precise charging for various battery chemistries.
- 정밀 충전: Integrated thermal sensor automatically adjusts charging based on ambient temperature to prevent overcharging or undercharging.
- 방전된 배터리 복구: Can charge batteries as low as 1 volt, with a Force Mode to manually initiate charging for deeply discharged batteries down to zero volts.
- Redefined Mounting: Simplified system for fast, secure installation in any orientation, featuring an anti-vibration backing.
- 방수 디자인 : Fully-sealed, IP68 rated for waterproof protection, tested to withstand thousands of hours underwater.
- 자동 작동: Provides year-round, all-season, all-weather charging with zero overcharge, automatically returning to its last selected mode.
4. 설정 및 설치
The GENPRO10X1 is designed for easy and secure installation. It includes 72-inch DC cables with 3/8-inch eyelets and a 72-inch AC cable (Type-B). The redesigned mounting system allows for installation in any orientation, including upside down, and features an anti-vibration backing to minimize shock and noise.
- 장착 위치를 선택하세요: Select a secure, dry location within your marine vessel or vehicle. The charger's IP68 rating ensures protection against water, but proper ventilation is always recommended.
- 충전기를 안전하게 고정하세요: Use the two included truss-head screws to firmly mount the charger. The anti-vibration backing helps to isolate shock and noise.
- 배터리에 연결: Attach the 3/8-inch eyelets of the DC cables to your 12V battery terminals. Ensure correct polarity: red to positive (+), black to negative (-).
- AC 전원에 연결: Plug the Type-B AC cable into a standard 120-240VAC outlet.
이미지 설명: The NOCO Genius GENPRO10X1 charger is shown installed in a boat's battery compartment, connected to a deep cycle battery. This illustrates the compact size and on-board installation capability.
이미지 설명: The NOCO Genius GENPRO10X1 charger is depicted being splashed with water, emphasizing its IP68 waterproof rating and suitability for marine environments.
5. 사용 설명서
The GENPRO10X1 features selectable charging modes to optimize performance for nearly any battery chemistry or condition. The charger automatically detects ambient temperature and adjusts the charge cycle accordingly.
- 전원 켜기: 충전기가 배터리와 AC 전원에 연결되면 자동으로 진단 및 충전 과정을 시작합니다.
- 충전 모드 선택: 'MODE' 버튼을 눌러 사용 가능한 충전 모드를 순환하며 선택하세요.
- 12V : 12V 습식 전지, 젤 전지, 강화형 습식 전지, 무보수형 전지 및 칼슘 전지에 사용 가능합니다.
- 12V AGM: 12V AGM 배터리용.
- 12V Lithium: For 12V lithium-ion batteries (LiFePO₄) with Battery Management Systems (BMS).
- 12V 수리 모드: Used to repair old, idle, damaged, stratified, or sulfated 12V lead-acid batteries.
- Force Mode (for Dead Batteries): For batteries as low as zero volts, press and hold the 'MODE' button for approximately three (3) seconds to activate Force Mode. This allows manual charging to begin.
- 충전 표시기: The charger features LED indicators to show the charging status and battery health. A solid green light indicates a fully charged battery.
이미지 설명: An illustration detailing the various advanced charging modes available on the NOCO Genius GENPRO10X1, including 12V, 12V AGM, 12V Lithium, Repair Mode, and Force Mode, with descriptions of their applications.
이미지 설명: A hand is shown pressing the 'MODE' button on the NOCO Genius GENPRO10X1 charger, demonstrating the activation of Force Mode to charge a deeply discharged battery, with a multimeter showing zero volts.
6. 유지관리
The GENPRO10X1 is designed to be a battery maintainer, ensuring optimal battery health over extended periods. It provides all-season, all-weather charging and automatically prevents overcharging. Simply leave it plugged in to keep your battery topped off and extend its lifespan.
- 정기적으로 충전기와 케이블을 검사하여 손상 흔적이 있는지 확인하세요.
- 충전기를 깨끗하고 이물질이 없는 상태로 유지하세요.
- Ensure proper ventilation around the charger, even though it is sealed.
이미지 설명: The NOCO Genius GENPRO10X1 is shown connected to a battery, illustrating its completely automatic, worry-free charging capabilities, including year-round charging, zero overcharge, and auto memory.
7. 문제 해결
If you encounter issues with your GENPRO10X1 charger, please refer to the detailed user guide included in the package. Common issues and their solutions are typically covered there. Ensure all connections are secure and the correct charging mode is selected for your battery type.
8. 사양
| 제품 치수 | 2.8 x 5.8 x 5.6인치(7.62인치 깊이 x 7.2인치 너비 x 6.1인치 높이) |
| 품목 무게 | 5.1파운드 |
| 모델 번호 | 젠프로10X1 |
| 출력 볼륨tage | 12 볼트 |
| Amp에라 지 | 10A per bank (1-bank total) |
| 방수 등급 | IP68 |
| 인증 | UL1236, ISO 8846, 33 CFR 183.410 (Ignition Protection & Marine Safety) |
9. 보증 및 지원
The NOCO GENPRO10X1 is backed by a 3년 보증. For support or warranty claims, please refer to the contact information provided in your user guide or visit the official NOCO website. The product is engineered in the USA.
