1. 제품 오버view
This manual provides detailed instructions for the setup, operation, and maintenance of your ELECROW 7 Inch Touchscreen Monitor, Model RC070S. Please read thoroughly before use.
모델: RC070S
브랜드: 일렉트로
The ELECROW 7-inch IPS touchscreen offers a 1024x600 resolution, adjustable via software to 1920x1080. It features vivid colors, a 178° viewing angle, and a durable, scratch-resistant tempered glass touch panel. Designed for plug-and-play functionality, it connects via HDMI for video and USB for power and touch control, requiring no additional drivers. It is compatible with various devices including Raspberry Pi 5/4/3B+/3B/2B+, Banana Pi, Jetson Nano, PCs, laptops, and gaming consoles. The monitor supports 5-point capacitive touch on Windows 11/10/8/7 and single-touch on Raspberry Pi and Jetson Nano. Integrated dual speakers and a 3.5mm headphone jack provide immersive audio, with adjustable volume and backlight settings.
2. 패키지 내용
- 1 x 7 Inch IPS Monitor
- 1 x USB to Micro USB Connector
- 1 x HD to Micro HD Connector
- 1 x USB-마이크로 USB 케이블
- 1 x HD to HD Cable
- 4 x M2.5 나사
- 2 x M3 나사
- 2 x 스피커
- 2 x 프로 스탠드
- 4 x Small Copper Pillars
3. 기술 사양
| 특징 | 사양 |
|---|---|
| 디스플레이 화면 크기 | 7 인치 |
| 패널 유형 | IPS |
| 터치타입 | 5포인트 정전식 터치 |
| 해결 | 1024 x 600 Pixels (Software adjustable to 1920x1080) |
| 명도 | 260칸델라/제곱미터 |
| View잉 각도 | 178°(수평) / 178°(수직) |
| 새로 고침 빈도 | 60Hz |
| HDMI 포트 | 1 |
| USB 포트 | 1 (for power and touch) |
| 오디오 출력 | 3.5mm Audio Jack, Built-in Dual Speakers |
| 입력 Voltage | 5 볼트 |
| Total Power (Max) | 2.55와트 |
| 작동 온도 | -20도 ~ 60도 |
| 보관 온도 | -30도 ~ 70도 |
| 제품 치수 | 1 x 6.5 x 4 인치 |
| 품목 무게 | 8.3 온스 |
| 지원되는 OS | Windows 11/10/8/7, Raspbian, Ubuntu, Kali, Retropie, Jetson Nano |
4. 설정 및 설치
4.1 총회
To set up the monitor, first attach the included stands to the bottom of the display using the provided screws. Ensure the protective film is removed from the stands before assembly.
4.2 Raspberry Pi Connection
For Raspberry Pi connections, use the provided HDMI cable for video and the USB cable for power and touch functionality. For Raspberry Pi 4 and 5, use the included Micro-HDMI to HDMI adapter. No drivers are required for basic functionality.
중요한: For Raspberry Pi 4, if using a system image after 2021-10-30 (e.g., Bullseye), modify dtoverlay = vc4-kms-v3d 에게 dtoverlay = vc4-fkms-v3d 에서 config.txt file. For Buster, comment out dtoverlay = vc4-fkms-V3D by adding a '#' at the beginning of the line.
Video 1: Step-by-step guide on how to install the 7-inch screen with a Raspberry Pi, demonstrating cable connections and initial setup.
Video 2: Instructions on how to install the Raspberry Pi board with the screen, detailing the physical mounting and connections.
4.3 PC 연결
Connect the monitor to your PC or laptop using the HDMI cable for video and the USB cable for power and touch. The monitor is driver-free for Windows 11/10/8/7. Adjust display settings on your PC for optimal resolution.
5. 모니터 작동하기
5.1 터치 기능
The monitor features a 5-point capacitive touchscreen for multi-touch gestures on Windows and single-touch on Raspberry Pi and Jetson Nano. Ensure the USB cable is connected to enable touch input.
5.2 온스크린 디스플레이(OSD) 메뉴
The monitor includes tactile buttons on the side for navigating the OSD menu. These buttons allow adjustment of various display settings:
- 그림: Adjust backlight, brightness, contrast, and sharpness.
- 색상: Modify panel uniformity, gamma, temperature, and color effects.
- 전진: Set aspect ratio.
- 오디오: 볼륨 조절 및 음소거 기능.
5.3 오디오 기능
The monitor is equipped with built-in dual speakers and a 3.5mm headphone jack for audio output. Digital audio output is also supported via HDMI.
6. 문제 해결
- 모니터 전원이 켜지지 않음: Ensure the power cable (USB-A to C) is properly plugged into both the Raspberry Pi/PC and the monitor.
- Image is reversed: The monitor does not support image flip.
- 터치 기능 없음: Verify the USB-A to C cable is securely connected between the host device and the monitor.
- No signal on display: Ensure the HDMI cable is properly connected between the host device and the monitor. If using a mini HDMI port, ensure the correct adapter is used.
- Speakers at high volume cause issues: When speakers are at 80% or more volume, connect the power port (not touch port) to provide full power.
7. 중요 사항
- The Raspberry Pi cannot be powered by powering the screen.
- Always connect the power interface when powering the screen. Supplying power through the touch interface may lead to insensitive or unusable touch functionality.
8. 보증 및 지원
ELECROW products offer a one-year warranty. For quality-related issues, you may return any undamaged product within 12 months for a refund or replacement. Shipping costs and charges are not included.
For support or inquiries, please contact ELECROW customer service:
- Web대지: www.eyyoyousa.com
- 이메일: support@eyoyomonitor.com
- 핸드폰: 909-317-8588 (9:00 AM–5:00 PM; Monday–Friday)
- USA Office Address: 10700 Jersey Blvd Ste 640, Rancho Cucamonga, CA 91730, USA
