제품 끝view
The ICT Billet Alternator Relocation Bracket Kit (Model 551587-LS01-3) is designed to relocate the alternator on various GM LS series engines. This kit is compatible with truck/SUV (or LS3/L99 Camaro) crank pulleys and 1998-2002 LS1 Camaro (or LS3) water pumps. It is manufactured from aerospace-grade USA billet aluminum, ensuring durability and precise fitment.
This kit includes the necessary alternator bracket components and mounting hardware for installation.
Figure 1: The ICT Billet Alternator Relocation Bracket Kit installed on an LS engine, showing the relocated alternator and belt routing.
키트 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- Upper Alternator Bracket
- Lower Alternator Bracket
- Mounting Hardware (various bolts and spacers)
Figure 2: All components included in the ICT Billet Alternator Relocation Bracket Kit, showing the two main bracket pieces and various bolts and spacers.
호환성 및 요구 사항
This bracket kit is designed for specific engine and accessory configurations:
- 엔진 호환성: All GM LS series engines.
- Crank Pulley Compatibility: Truck/SUV crank pulley or LS3/L99 Camaro crank pulley.
- Water Pump Compatibility: 1998-2002 LS1 Camaro water pump or LS3 water pump.
It is crucial to ensure your engine's crank pulley spacing matches the requirements for proper belt alignment and function. Refer to the LS Crank Spacing Guide for detailed measurements.
Figure 3: LS Crank Spacing Guide illustrating the three common crank pulley types (Corvette/CTS-V/SS/G8, 98-02 Camaro/GTO, and Truck/SUV/2010-Up Camaro) with their respective offset measurements from the face of the engine block.
설치 지침
Professional installation is recommended. Ensure the engine is cool and disconnected from the battery before beginning any work.
- 준비: Disconnect the negative battery terminal. If applicable, remove the existing alternator and any brackets that will be replaced by this kit.
- 브래킷 장착: Attach the lower alternator bracket to the designated mounting points on the engine block. Use the provided hardware and ensure proper torque specifications are met (refer to a service manual for your specific engine).
- 발전기 설치: Mount the alternator onto the new brackets. Secure it using the provided bolts and spacers. Ensure the alternator is seated correctly and can pivot freely if necessary for belt tensioning.
- 벨트 경로 설정: Route the serpentine belt according to the engine's accessory drive system. Ensure the belt is properly seated on all pulleys, including the relocated alternator pulley.
- 긴장: Adjust the belt tensioner to achieve the correct belt tension. A properly tensioned belt should have minimal deflection.
- 최종 점검: Double-check all bolted connections for tightness. Reconnect the battery terminal. Start the engine and verify proper alternator function and belt alignment. Listen for any unusual noises.
Figure 4: Technical drawing showing the installed bracket kit on an LS engine, including critical dimensions for clearance and fitment, such as the alternator's position relative to the engine block.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Belt Squeal/Noise | Incorrect belt tension, misaligned pulleys, worn belt. | Check and adjust belt tension. Verify all pulleys are aligned. Inspect belt for wear and replace if necessary. Ensure correct crank pulley spacing. |
| Alternator Not Charging | Loose electrical connections, faulty alternator, incorrect belt tension. | Inspect all electrical connections to the alternator. Test alternator output. Verify belt tension. |
| Bracket Interference | Incorrect component selection (e.g., steam port kit), improper installation. | Verify all components (crank pulley, water pump, steam port kit) are compatible with this bracket. Re-check installation steps and clearances. |
명세서
- 모델 번호: 551587-LS01-3
- 재료: Aerospace Grade USA Billet Aluminum
- 품목 무게: 1.98파운드
- 패키지 크기: 7.91 x 4.33 x 0.98 인치
- 원산지: 미국
- 호환성: GM LS series engines with Truck/SUV (or LS3/L99 Camaro) crank pulley and 1998-2002 LS1 Camaro (or LS3) water pump.
유지
This alternator relocation bracket kit requires minimal maintenance. Periodically inspect the following:
- 패스너: Check all mounting bolts for tightness, especially after the first few hundred miles of operation. Re-torque if necessary.
- 벨트 상태: Inspect the serpentine belt for cracks, fraying, or excessive wear. Replace the belt as part of routine engine maintenance if needed.
- Bracket Condition: Visually inspect the aluminum brackets for any signs of damage or corrosion. Clean with a mild automotive cleaner if desired.
보증 및 지원
For warranty information or technical support, please contact ICT Billet directly. Refer to the official ICT Billet web최신 연락처 정보 및 보증 조건은 웹사이트 또는 구매 서류를 참조하십시오.
제조업체: ICT Billet llc
Web대지: Visit the ICT Billet Store on Amazon
설치 설명서(PDF): A detailed PDF installation manual may be available for download. Please check the product page or manufacturer's website for availability: PDF 매뉴얼 다운로드
