1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of your ORION Cobalt CBA4500.1D Monoblock 1-Channel Class D Amp리퍼. 이것 amplifier is designed to deliver powerful and precise audio for car subwoofers, featuring a Class D design for efficiency and robust performance.
Key features include a quality frequency response, crossover network, 1 Ohm stability, adjustable low pass and subsonic filters, bass boost, and a MOSFET power supply for reliable operation. It also incorporates a 2-way protection circuitry to safeguard against potential issues.
2. 상자 안에 무엇이 들어있나요?
Upon unpacking your ORION Cobalt CBA4500.1D amplifier, please ensure all items are present:
- ORION Cobalt CBA4500.1D Monoblock Amp리퍼
- 장착 하드웨어
- 리모트 베이스 노브
- 사용 설명서 (본 문서)
If any items are missing or damaged, please contact your dealer or ORION customer support immediately.
3. 안전 정보
경고: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please refer to www.P65Warnings.ca.gov.
Always ensure proper ventilation around the amplifier to prevent overheating. Incorrect installation or operation can lead to damage to the amplifier, vehicle, or personal injury. It is recommended that installation be performed by a qualified professional.
4. 설치 가이드
Proper installation is crucial for optimal performance and safety. It is highly recommended to have this amplifier installed by a certified car audio professional.
4.1 장착 Amp리퍼
Choose a mounting location that is dry, well-ventilated, and protected from direct sunlight or excessive heat. Ensure there is sufficient airflow around the amplifier to prevent overheating. The amplifier can be mounted on a panel or using brackets.
이미지: 상단 view of the ORION Cobalt CBA4500.1D Monoblock Amplifier, showing the ORION logo and model number.
이미지: 측면 view of the ORION Cobalt CBA4500.1D Monoblock Amplifier, displaying the power input terminals (+12V, REM, GND) and speaker output terminals, along with the fuse slots.
4.2 배선 연결
전기 합선을 방지하기 위해 연결 작업을 하기 전에 차량 배터리의 음극 단자를 분리하십시오.
- 전원 연결(+12V): Connect a heavy gauge power cable (not included) from the vehicle's positive battery terminal to the +12V terminal on the amplifier. Ensure an appropriate fuse holder is installed within 18 inches of the battery.
- 접지 연결(GND): Connect a heavy gauge ground cable (not included) from the GND terminal on the amp앰프를 차량 섀시의 깨끗하고 도색되지 않은 금속 표면에 접지하십시오. 접지점은 가능한 한 짧아야 합니다.
- 원격 켜기(REM): Connect a remote turn-on wire (not included) from your head unit's remote output to the REM terminal on the amp이 전선은 신호를 보냅니다. amp앰프를 헤드 유닛과 함께 켜고 끌 수 있습니다.
- 스피커 출력: Connect your subwoofer(s) to the speaker output terminals. This is a 1-channel monoblock amplifier, designed for a single subwoofer or multiple subwoofers wired to a 1 Ohm stable load. Refer to your subwoofer's specifications for proper wiring configurations.
- RCA 입력(INPUT): Connect RCA cables from your head unit's subwoofer output to the RCA input jacks on the amp리퍼. NS amplifier supports low-level (RCA) inputs.
- 원격 베이스 손잡이: Connect the included remote bass knob to the 'REMOTE' port on the amplifier. This allows for convenient adjustment of the bass level from the driver's seat.
이미지: 측면 view of the ORION Cobalt CBA4500.1D Monoblock Amplifier, showing RCA input/output, gain control, low pass filter, subsonic filter, phase switch, bass boost, and remote bass knob port.
Image: The remote bass knob and its connecting cable, used for convenient bass level adjustment.
5. 사용 설명서
설치되면 amplifier can be configured for optimal audio performance using its various controls.
5.1 Gain Control (GAIN)
The GAIN control adjusts the input sensitivity of the amplifier. Start with the gain set to minimum (MIN) and slowly increase it until the desired volume is achieved without distortion. This should be matched to the output voltag헤드 유닛의 e.
5.2 저역통과필터(LPF)
The LPF control allows you to set the upper frequency limit for the amplifier's output, typically ranging from 40Hz to 250Hz. This ensures that only low frequencies are sent to your subwoofer, preventing it from playing higher frequencies it's not designed for.
5.3 Subsonic Filter (SONIC)
The SUB SONIC filter removes extremely low frequencies (below 15Hz-50Hz) that are inaudible but can cause your subwoofer to over-excurt and waste power. Adjust this to protect your subwoofer and improve sound quality.
5.4 Bass Boost (BASS BOOST)
The BASS BOOST control provides an adjustable boost to low frequencies, typically from 0dB to 12dB. Use this feature to enhance the bass impact according to your preference. Use sparingly to avoid distortion or damage to speakers.
5.5 Phase Shift (PHASE)
The PHASE switch (0° or 180°) helps to align the phase of the subwoofer's output with the rest of your car audio system. Experiment with both settings to find the one that provides the most coherent and impactful bass response.
5.6 Remote Bass Knob
The remote bass knob provides convenient, real-time adjustment of the subwoofer's output level from your driving position. This allows for quick adjustments without needing to access the amp리퍼 직접.
6. 유지관리
To ensure the longevity and optimal performance of your ORION Cobalt CBA4500.1D amplifier의 경우 다음 유지 관리 지침을 따르세요.
- 청소: 주기적으로 청소하십시오 amp부드럽고 마른 천으로 청소기 외부를 닦으세요. 강한 화학 물질이나 연마성 세제는 사용하지 마세요.
- 통풍: 다음을 확인하세요. amplifier's ventilation openings are not obstructed. Proper airflow is essential to prevent overheating.
- 사이: Regularly check all wiring connections for tightness and corrosion. Loose or corroded connections can lead to performance issues or damage.
- 퓨즈 : 그만큼 amplifier is equipped with fuses for protection. If a fuse blows, replace it only with a fuse of the same type and rating. Never use a higher rated fuse.
7. 문제 해결
문제가 발생하는 경우 amplifier의 경우 다음의 일반적인 문제 해결 단계를 참조하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 전원 없음 / Amp리퍼가 켜지지 않습니다 | 퓨즈가 끊어졌거나, 전원/접지/리모컨 전선이 느슨하거나, 리모컨 켜기 신호에 결함이 있습니다. | 퓨즈를 점검하고 필요하면 교체하십시오. 모든 전원, 접지 및 리모트 연결이 단단히 고정되었는지 확인하십시오. 헤드 유닛이 켜져 있을 때 리모트 배선에 12V 전압이 들어오는지 테스트하십시오. |
| 소리가 출력되지 않음 | Loose RCA cables, incorrect gain setting, speaker wiring issues, amp보호 모드의 liifier. | Check RCA connections. Adjust gain. Verify speaker wiring for correct polarity and impedance. Check if the PWR/PRT indicator is red (protection mode). |
| 왜곡된 소리 | Gain set too high, incorrect LPF/Subsonic settings, speaker impedance mismatch. | Lower the gain. Adjust LPF and Subsonic filters. Ensure speaker impedance matches amplifier's capabilities (1, 2, or 4 Ohm stable). |
| Amp리파이어 과열 | 환기 부족, 임피던스 과다, 장시간 고출력 사용. | 적절한 공기 흐름을 확보하십시오. amplifier. Check speaker impedance. Reduce volume or usage time. |
If the problem persists after following these steps, please contact ORION customer support or a qualified service technician.
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | CBA4500.1D |
| 상표 | 오리온 |
| 채널 수 | 1 (모노블록) |
| Ampliifier 클래스 | D 클래스 |
| 출력 전력(최대) | 4500 와트 |
| RMS 전력 @ 1옴 | 1125와트 |
| RMS 전력 @ 2옴 | 650와트 |
| RMS 전력 @ 4옴 | 350와트 |
| 임피던스 안정성 | 1/2/4 Ohm Stable |
| 주파수 응답 | 10~250Hz |
| 저역 통과 필터 (LPF) | 조절 가능 (40Hz-250Hz) |
| 아음속 필터 | 조절 가능 (15Hz-50Hz) |
| 베이스 부스트 | Adjustable (0dB-12dB) |
| 위상 변이 | 0° / 180° |
| 전원 공급 장치 | 모스펫 |
| 보호 회로 | 2-way (Thermal Protection) |
| 권tage | 12볼트 (최대 공급 전압)tage: 16볼트) |
| 제품 크기(L x W x H) | 15 x 7 x 3 인치 |
| 품목 무게 | 5.48파운드 |
| 한국어: | 818550017085 |
9. 공식 제품 영상
Video: "Unleashing the Power of the Orion CBA4500.1D Amplifier" - This video provides a visual overview 의 amplifier's features, design, and internal components, demonstrating its capabilities and build quality.
10. 보증 및 지원
ORION products are designed for durability and performance. For warranty information, technical support, or service inquiries, please refer to the official ORION web사이트를 방문하거나 공인 딜러에게 문의하세요.
구매 영수증을 보관하여 보증 청구에 대비하세요.
추가 리소스 및 제품 정보는 다음을 방문하세요. ORION Store on Amazon.
