Hansong Vanity Mirror with Lights and Bluetooth

소개

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Hansong Vanity Mirror with Lights and Bluetooth. This extra-large Hollywood-style makeup mirror features 18 LED bulbs, three color lighting modes, USB charging capabilities, and integrated Bluetooth speakers for an enhanced user experience. Please read this manual thoroughly before use to ensure proper functionality and safety.

안전 정보

• Ensure the mirror is placed on a stable, flat surface or securely mounted to a wall to prevent tipping.
• Do not expose the mirror to excessive moisture or direct water spray. This product is designed for indoor use only.
• Handle the mirror with care. Although made with tempered glass for enhanced durability, improper handling can still cause damage.
• Unplug the mirror from the power outlet before cleaning or performing any maintenance.
• Keep the power cord away from heat sources and sharp edges. Do not place heavy objects on the cord.
• Do not attempt to disassemble or repair the mirror yourself. Refer all servicing to qualified personnel.
• If the mirror arrives damaged or experiences any issues, contact customer support immediately.

Figure 1: Tempered Glass for Enhanced Safety

패키지 내용

포장을 개봉할 때 모든 구성품이 있는지, 그리고 양호한 상태인지 확인하십시오.

• Hansong Vanity Mirror with Lights and Bluetooth
• 분리형베이스
• 전원 어댑터
• 10X Magnifying Mirror (with suction cups)
• 벽 설치용 장착 하드웨어
• 사용 설명서 (본 문서)

설정

탁상 설치

1. Carefully remove the mirror from its packaging.
2. Locate the screws at the bottom of the mirror frame. Unscrew them if they are pre-installed.
3. Align the holes in the detachable base with the corresponding holes at the bottom of the mirror.
4. Insert and tighten the screws to secure the base firmly to the mirror.
5. Place the assembled mirror on a stable, flat surface.
6. Connect the power adapter to the mirror's power input port and then plug it into a standard electrical outlet.

Figure 2: Tabletop Installation Steps

벽면 장착 설치

The mirror is designed with two back holes for wall mounting. Ensure the wall can support the mirror's weight (approximately 18.08 pounds). Professional installation is recommended for wall mounting.

1. Identify the desired location on the wall. Ensure it is a sturdy surface.
2. Measure the distance between the two mounting holes on the back of the mirror.
3. Mark the corresponding points on the wall using a pencil and a level to ensure horizontal alignment.
4. Drill pilot holes at the marked locations. Insert wall anchors if necessary (e.g., for drywall).
5. Screw the provided mounting hardware (screws) into the wall, leaving a small portion protruding to hang the mirror.
6. Carefully lift the mirror and align the back holes with the screws on the wall. Gently lower the mirror until it is securely seated.
7. Connect the power adapter to the mirror's power input port and then plug it into a standard electrical outlet.

Figure 3: Mirror Dimensions and Installation Options

작동 지침

1. Power On/Off and Lighting Modes

The mirror features touch-sensitive controls located on the mirror surface.

• 전원 켜기/끄기: 전원 아이콘을 터치하세요(⏻) to turn the lights on or off.
• 조명 모드 변경: Touch the light bulb icon (💡) to cycle through the three color lighting modes:
  • 차가운 빛: Suitable for office makeup.
  • 자연광: Ideal for outdoor makeup.
  • 따뜻한 빛: Best for party and date makeup.
• 밝기 조정: Press and hold the light bulb icon (💡) to dim or brighten the lights to your desired level.

Figure 4: Three Color Lighting Modes

그림 5: 밝기 조정

2. 블루투스 연결

The mirror is equipped with two Bluetooth speakers and a microphone, allowing you to play music and answer calls.

1. 미러의 전원이 켜져 있는지 확인하십시오.
2. Activate Bluetooth on your smartphone or other Bluetooth-enabled device.
3. 검색 available Bluetooth devices. The mirror will appear as "Hansong Mirror" or similar.
4. Select the mirror from the list to pair. A confirmation sound will indicate successful pairing.
5. Once paired, you can play audio through the mirror's speakers and use the integrated microphone for calls.

Figure 6: Connecting to Bluetooth Speakers

3. USB 충전 포트

A USB output charging port is located on the side of the mirror, allowing you to charge your phone or other USB-powered devices.

• Connect your device's USB charging cable to the USB port on the mirror.
• Ensure the mirror is plugged into a power outlet for the USB charging function to work.

Figure 7: USB Output Charging Port

4. 10X Magnifying Mirror

The included 10X magnifying mirror is detachable and features suction cups for easy attachment to the main mirror or any smooth surface. It is useful for detailed tasks such as eyebrow plucking or precise eye and lip makeup application.

• To attach, press the suction cups firmly against the main mirror surface.
• To remove, gently lift the edge of the suction cups to release the vacuum.

Figure 8: 10X Magnifying Mirror

유지

• 거울 표면 청소: 부드럽고 보풀 없는 천과 연마 성분이 없는 유리 세정제를 사용하세요. 세정제를 거울에 직접 뿌리지 말고 천에 뿌려서 전기 부품에 액체가 스며드는 것을 방지하세요.
• 프레임 청소: 금속 프레임을 부드러운 천으로 닦으세요.amp 천으로 닦으세요. 강한 화학 물질이나 연마성 세제는 피하세요.
• 전구 교체: The LED bulbs are integrated and designed for long-term use. They are not user-replaceable.
• 저장: If storing the mirror for an extended period, unplug it and store it in a dry, cool place, preferably in its original packaging to protect it from dust and damage.

문제 해결

명세서

보증 및 지원

Hansong is committed to providing high-quality products. While the mirror is designed for durability with tempered glass, unforeseen issues may occur.

For any product-related inquiries, technical support, or warranty claims, please contact Hansong customer service directly. Please have your purchase details and model information ready when contacting support.

Contact information can typically be found on the Hansong official web사이트나 구매처를 통해 구매하세요.