1. 서론
Thank you for choosing the AQQA Submersible Aquarium Water Pump. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your pump. Please read these instructions thoroughly before use and retain them for future reference.
This submersible pump is designed for various aquatic applications, including aquariums, fish tanks, ponds, and hydroponic systems. It features an adjustable flow rate, ultra-quiet operation, and a high lift capability.
2. 중요 안전 지침
- 전기 안전: 전원 공급 장치 볼륨을 확인하십시오.tage matches the pump's specifications (110V). Always unplug the pump from the power outlet before performing any maintenance, installation, or when not in use. Do not operate the pump with a damaged cord or plug.
- 잠수: The pump must be completely immersed in water during operation to prevent dry burning, which can damage the motor and void the warranty.
- 온도: The pump is equipped with an automatic power-off feature if the water temperature exceeds 85°C (185°F) to prevent overheating.
- 놓기: Position the pump securely on a flat surface within the water body. Ensure it is not obstructed by debris.
- 어린이와 애완동물: Keep the pump and its power cord out of reach of children and pets.
- 용도: This pump is designed for water circulation in aquatic environments. Do not use it for flammable liquids, corrosive chemicals, or other non-water applications.
3. 패키지 내용
아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.
- AQQA Submersible Water Pump (Model AQ009, 265GPH 15W)
- 1/2 inch (13mm) Nozzle
- 5/8 inch (16mm) Nozzle
- 사용자 설명서
Figure 3.1: AQQA Submersible Water Pump with included 13mm and 16mm nozzles.
Figure 3.2: Detailed diagram showing the water outlet, rotary adjustment button, protective water inlet cover, UL cable (6ft, 3-prong plug), handle, and shockproof rubber feet of the 15W pump.
4. 제품 특징
- 조정가능한 흐름율: A rotary knob allows precise control over water flow.
- 매우 조용한 작동: Equipped with a pure copper motor and ceramic shaft impeller for minimal noise.
- 하이 리프트 기능: Capable of pumping water to a maximum height of 4.9 feet.
- 저수위 양수 작업: Designed to pump water down to 1 inch (approximately 1cm) from the bottom.
- 360° Bottom Suction: Efficiently removes dirt and impurities from the bottom of the tank.
- 안전 기능: IPX8 waterproof rating and automatic power-off protection against dry burning (if water temperature exceeds 85°C).
- 내구성 있는 구조: Made from Acrylonitrile Butadiene Styrene (ABS) with a durable pure copper motor.
- 통합 핸들: A 90° rotating handle for convenient placement and removal.
그림 4.1: 주요 장점tages of the pump, including a silent ceramic shaft, rubber damping anti-slip feet, high-quality motor with anti-dry burning protection (auto power off above 85°C), and a hidden handle for convenience.
Figure 4.2: Illustrates the pump's IPX8 waterproof rating and its durable pure copper motor, highlighting its robust construction.
Figure 4.3: Demonstrates the pump's ability to operate effectively at a low water level, down to approximately 1 cm (0.4 inches) from the bottom.
5. 설정 지침
- 노즐 선택: Choose the appropriate nozzle (13mm or 16mm) for your application. The 13mm nozzle provides a narrower, stronger flow, while the 16mm nozzle offers a wider flow.
- 노즐 부착: Securely screw the selected nozzle onto the pump's water outlet.
- 놓기: Place the pump completely submerged in the water body (aquarium, pond, etc.). Ensure the pump is stable and not resting on loose debris.
- 전원 연결: Once the pump is fully submerged, plug the 6ft power cord into a standard 110V electrical outlet.
Figure 5.1: The AQQA pump installed in an aquarium, illustrating the connection of different nozzle sizes for varied water flow requirements.
6. 사용 설명서
- 전원 켜기: After proper setup and submersion, plug in the pump to start operation.
- 유량 조정: Locate the 'FLOW VALVE' rotary knob on the side of the pump. Rotate the knob towards '+' to increase the water flow rate, or towards '-' to decrease it. Note that the flow cannot be completely turned off using this knob.
- 모니터링: Observe the water flow and adjust as needed for your specific application.
- 전원 끄기 : To stop the pump, unplug it from the electrical outlet. Always unplug before removing the pump from water.
그림 6.1: 클로즈업 view of the rotary switch (Flow Valve) on the pump, used to adjust the water flow rate from minimum to maximum.
7. 유지관리
Regular cleaning and maintenance will ensure the longevity and optimal performance of your AQQA water pump.
- 전원 분리: 유지관리를 하기 전에는 항상 펌프의 플러그를 전원에서 뽑아 두십시오.
- 물에서 꺼내세요: Carefully remove the pump from the water body.
- 분해: Gently twist and pull the base of the pump to detach it. This will expose the impeller assembly.
- 임펠러 청소: Remove the impeller and clean it thoroughly with a soft brush and clean water to remove any accumulated debris, algae, or mineral deposits. Ensure the impeller shaft is also clean.
- Clean Inlet Cover: Clean the protective water inlet cover to ensure unrestricted water flow.
- 재조립: Reassemble the pump by carefully placing the impeller back and securing the base. Ensure all parts are fitted correctly.
- 빈도: Clean the pump regularly, especially if you notice a decrease in flow rate or increased noise.
Figure 7.1: Instructions for easy cleaning: regularly disassemble the base and clean the impeller to prevent blockages and maintain optimal performance.
Figure 7.2: The ceramic impeller, designed for durability and quiet operation in both fresh and saltwater environments.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 펌프가 시작되지 않습니다 | 전원 공급이 없습니다 임펠러 걸림 건식 연소 방지 활성화 | 전원 연결 및 콘센트를 확인하세요 Unplug, disassemble, and clean impeller Ensure pump is fully submerged and water temperature is below 85°C |
| 물의 흐름이 감소함 | Clogged inlet or impeller 유량 조절 노브가 너무 낮게 설정되어 있습니다. 펌프에 공기가 들어 있음 | Unplug, disassemble, and clean pump components Adjust flow rate knob towards '+' Ensure pump is fully submerged and free of air pockets |
| 과도한 소음 또는 진동 | 임펠러가 막혔거나 손상되었습니다 펌프가 불안정함 드라 이런 | Unplug, inspect, and clean impeller. Replace if damaged. Ensure pump is placed on a flat, stable surface Ensure pump is fully submerged in water |
| 펌프가 예기치 않게 정지됨 | Overheating (dry burning protection) 정전 | Check water level and temperature. Allow pump to cool before restarting. 전원 공급을 확인하세요 |
9. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 | 에이큐009 |
| 힘 | 15와트 |
| 권tage | 110V |
| 최대 유량 | 265 GPH(1000L/H) |
| 최대 리프트 높이 | 4.9 피트 |
| 제품 크기(L x W x H) | 4인치 x 4인치 x 4인치 |
| 품목 무게 | 0.56kg(1.23파운드) |
| 재료 | 아크릴로니트릴 부타디엔 스티렌(ABS) |
| Outlet Connection (Nozzles) | 1/2" (13mm), 5/8" (16mm) |
| 전원 코드 길이 | 6 피트 |
| 방수 등급 | IPX8 |
Figure 9.1: Comprehensive table detailing product parameters including power, flow rate, head max, power cord length, outlet connections, and voltage for various pump models. This manual focuses on the 15W model.
10. 보증 및 지원
For warranty information or technical support, please refer to the product packaging or contact AQQA customer service directly. Keep your purchase receipt as proof of purchase.
추가 지원이 필요하면 다음을 방문하세요. AQQA Store on Amazon.
