소개
This manual provides essential instructions for the installation, operation, and maintenance of your Hanwha Techwin HCP-6320HA Full-HD 2MP Analog HD PTZ Dome Camera. Please read this manual thoroughly before using the product to ensure proper and safe operation.
안전 정보
- 설치는 모든 지역 법규 및 규정에 따라 자격을 갖춘 담당자가 수행해야 합니다.
- Ensure the power supply (24V AC) matches the camera's requirements. Disconnect power before any installation or maintenance procedures.
- 카메라를 지정된 작동 조건을 벗어나는 극한 온도, 습도 또는 부식성 환경에 노출시키지 마십시오.
- Avoid direct exposure of the lens to strong light sources, as this may damage the image sensor.
- This product is designed for outdoor use with IP66 weather protection and IK10 vandal resistance.
패키지 내용
패키지에 모든 구성품이 들어 있는지 확인하세요.
- HCP-6320HA PTZ Dome Camera
- 사용자 가이드 (이 문서)
- Mounting hardware (if included in standard package)
제품 끝view
The Hanwha Techwin HCP-6320HA is a high-performance Full-HD 2MP Analog HD PTZ (Pan-Tilt-Zoom) dome camera designed for outdoor surveillance. It features a powerful 32x optical zoom lens (4.44-142.6mm), Day & Night functionality with an IR Cut Filter (ICR), Wide Dynamic Range (WDR 120dB), and advanced noise reduction (SSNRIII).
그림 1: 앞쪽 view of the Hanwha Techwin HCP-6320HA PTZ Dome Camera. The camera features a white dome housing with a clear protective bubble covering the lens assembly. The "Wisenet" logo is visible on the upper part of the dome.
주요 특징
- 2 Megapixel (1920 x 1080) Full HD Resolution
- 1/2.8인치 CMOS 센서
- 32x Optical Zoom (4.44 ~ 142.6mm)
- Day & Night (ICR) and Defog functions
- WDR (120dB) and SSNRIII (Digital Noise Reduction)
- High-speed Pan/Tilt: 700°/sec preset speed
- IP66 Weatherproof and IK10 Vandal-Proof ratings
- Analog HD (AHD/TVI/CVI/CVBS selectable) video output
- RS-485 and Coaxitron (Up the Coax) control
설정 및 설치
카메라 장착
The HCP-6320HA is designed for wall mounting. Ensure the mounting surface is strong enough to support the camera's weight (approximately 7 lbs) and any associated cabling.
- 원하는 시야를 확보할 수 있는 적절한 설치 위치를 선택하십시오. view 전원 및 비디오 케이블이 닿을 수 있는 거리에 있습니다.
- 제공된 장착 템플릿(해당되는 경우)을 사용하여 장착 브래킷용 드릴 포인트를 표시하십시오.
- Drill pilot holes and secure the mounting bracket to the surface using appropriate screws and anchors.
- 카메라를 마운팅 브래킷에 부착하고 단단히 고정되었는지 확인하십시오.
배선 연결
The camera requires a 24V AC power supply and uses wired connectivity for video and control.
- 전원 연결: Connect the 24V AC power supply to the camera's power input. Ensure correct polarity.
- 비디오 출력: Connect the analog HD video output (BNC connector) to your DVR or video monitoring system. The camera supports various analog HD formats (AHD, TVI, CVI) and CVBS, which can typically be selected via the OSD menu or DIP switches.
- 제어(선택 사항): For PTZ control, connect the RS-485 communication lines (Tx+/Tx-) to your DVR or PTZ controller. Alternatively, Coaxitron (Up the Coax) control can be used if supported by your DVR, eliminating the need for separate RS-485 wiring.
초기 구성
After physical installation and wiring, power on the camera. Access the camera's On-Screen Display (OSD) menu via your DVR or controller to configure settings such as video format, PTZ protocols, and image adjustments.
카메라 작동
팬, 틸트 및 줌(PTZ) 제어
The HCP-6320HA offers precise PTZ control, allowing you to remotely adjust the camera's view촬영 각도와 확대/축소 수준.
- 팬: Rotate the camera horizontally (360° continuous).
- 경사: Adjust the camera vertically.
- 줌: Use the 32x optical zoom to magnify distant objects.
- 집중하다: The camera typically features auto-focus, but manual focus may be available via the OSD menu.
Preset and Tour Functions
Configure specific camera positions (presets) and sequences of presets (tours) for automated surveillance.
- 사전 설정 설정: Move the camera to the desired position, zoom, and focus, then save it as a preset through your DVR or controller interface. The camera supports high-speed preset recall.
- Running Tours: Create a tour by linking multiple presets in a specific order and duration.
이미지 설정
Adjust various image parameters through the OSD menu to optimize video quality for different lighting conditions.
- WDR (Wide Dynamic Range) : Improves visibility in scenes with both very bright and very dark areas.
- 낮과 밤 : Automatically switches between color (day) and black & white (night) modes, utilizing the IR Cut Filter (ICR).
- SSNRIII: Reduces digital noise in low-light conditions.
- 안개 제거: Enhances image clarity in foggy or hazy environments.
유지
청소
- 카메라 돔 커버를 부드러운 천으로 정기적으로 청소하십시오.amp 먼지와 오물을 닦아낼 때는 천을 사용하세요. 연마성 세제는 사용하지 마세요.
- Ensure the lens is free from smudges or obstructions for clear image quality.
펌웨어 업데이트
한화테크윈을 주기적으로 확인하세요 website for firmware updates. Firmware updates can improve performance, add new features, or address security vulnerabilities. Follow the manufacturer's instructions carefully when performing updates.
문제 해결
일반적인 문제 및 솔루션
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 비디오 출력이 없습니다 | No power; Incorrect video format; Loose cable connection | Check power supply; Verify video format in OSD; Secure BNC cable |
| PTZ control not working | Incorrect RS-485 wiring; Wrong PTZ protocol; Incorrect camera ID | Check RS-485 connections (Tx+/Tx-); Configure correct protocol and ID in DVR/controller |
| 이미지가 흐릿함 | Lens dirty; Focus issue | Clean dome cover and lens; Adjust focus via OSD |
| 저조도 환경에서 화질이 좋지 않음 | Day/Night mode not active; SSNRIII disabled | Ensure Day/Night is set to Auto; Enable SSNRIII in OSD |
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 | HCP-6320HA |
| 이미지 센서 | 1/2.8인치 2MP CMOS |
| 해결 | 1920 x 1080(풀HD) |
| 프레임 속도 | 30fps |
| 렌즈 | 4.44 ~ 142.6mm (32x Optical Zoom) |
| 최소 조명 | Color: 0.2Lux@F1.6, B/W: 0.01Lux@F1.6 |
| 와이드 다이나믹 레인지 (WDR) | 120데시벨 |
| 디지털 노이즈 감소 | SSNRIII |
| 팬 속도 | Preset 700°/sec |
| 침투 방지 | IP66 비바람에 잘 견디는 |
| 반달 저항 | IK10 방범용 |
| 연결성 | Wired (Analog HD, RS-485, Up the Coax) |
| 전원 공급 장치 | 24V 교류 |
| 치수(길이 x 너비 x 높이) | 9 x 9 x 12 인치(대략) |
| 무게 | 7파운드(대략) |
| 권장 사용 | Outdoor Security Surveillance |
보증 및 지원
For warranty information and technical support, please refer to the official Hanwha Techwin web해당 웹사이트를 방문하거나 공인 대리점에 문의하십시오. 보증 청구를 위해 구매 영수증을 보관하십시오.
