ChunHee Wireless Dog Doorbell User Manual

소개

Thank you for choosing the ChunHee Wireless Dog Doorbell. This device is designed to assist with pet potty training and can also serve as a versatile doorbell for homes or a paging device for caregivers. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and a positive user experience.

이미지: 이상view of the ChunHee Wireless Dog Doorbell system, showing two receivers and two transmitters.

패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• 수신기 x 2
• 송신기 x 3
• Double-sided adhesive stickers x 3
• 사용 설명서 x 1
• 12V 23A Battery x 3
• 나사 세트 x 1

제품 특징

• 쉬운 활성화: Dogs can activate the wireless doorbell by lightly touching or sliding on the touch pad with their nose or paw. Suitable for dogs and cats of all sizes.
• 무선 범위: Maximum working range of 150 meters (approximately 492 feet) in an open area.
• Melody Options: 52 distinct ringtones available. Users can set any preferred melody as the doorbell chime.
• 조정 가능한 볼륨: 5 volume levels (0-110dB), including a unique silent mode.
• LED 표시등: Visual flash indicator for those with hearing impairment.
• 내구성 있는 디자인: IP55 waterproof and dustproof transmitter, allowing installation near doors. Avoid prolonged submersion in water.
• 다양한 용도: Can be used as a standard doorbell for homes, apartments, offices, and villas, or as a paging device for elderly individuals.

Image: A dog activating the doorbell transmitter, illustrating the easy trigger feature.

설정 및 설치

송신기 설치

The dog doorbell does not require wiring. It can be affixed to a door or wall using the provided 3M double-sided adhesive tape or the screw set.

• 설치하고자 하는 표면을 먼지와 기름기가 없도록 깨끗하게 닦으십시오.
• Peel off one side of the 3M double-sided adhesive tape and apply it to the back of the transmitter.
• Peel off the other side of the tape and firmly press the transmitter onto the chosen surface (door, wall, or glass).
• Alternatively, use the screw set to mount the transmitter for a more permanent installation.

수신기 배치

The receiver plugs into a standard electrical outlet and does not require batteries for operation. Place the receiver in a location where the chime can be clearly heard, such as the kitchen or bedroom.

이미지: 전amples of transmitter installation on a door and glass, and receiver in use.

작동 지침

Adjusting Volume and Melodies

• 볼륨 조절: Press the volume button on the side of the receiver to cycle through 5 volume levels (0-110dB). The silent mode (0dB) will only activate the LED flash.
• 멜로디 선택: Use the forward/backward buttons on the receiver to browse through the 52 available ringtones.

Pairing Additional Transmitters/Receivers

The system supports adding more receivers or transmitters. Follow these steps to pair new components:

1. Place the transmitter next to the receiver and plug in the receiver.
2. Press and hold both the volume button and the melody selection button simultaneously for 5 seconds until the receiver's indicator light flashes blue rapidly.
3. While the receiver light is flashing, press the button on the transmitter. The receiver will chime, indicating successful pairing.

이미지: 상세 view of the receiver's controls for volume, pairing, and melody selection.

유지

• 청소: Wipe the doorbell components with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• 배터리 교체(송신기): The transmitter uses a 12V 23A alkaline battery. Replace the battery when the signal strength weakens or the transmitter stops functioning. To replace, open the transmitter casing. 기존 배터리를 제거하고 새 배터리를 삽입할 때 극성이 올바른지 확인하십시오.
• 방수 기능: The transmitter is IP55 waterproof, meaning it is protected against dust and low-pressure water jets. Do not submerge the transmitter in water for extended periods.

문제 해결

• 수신기에서 소리가 나지 않습니다.
  • 수신기가 작동하는 전기 콘센트에 제대로 꽂혀 있는지 확인하세요.
  • Check if the receiver is in silent mode (0dB). Press the volume button to increase the volume.
  • Verify that the transmitter battery is not depleted. Replace if necessary.
  • Re-pair the transmitter and receiver following the "Pairing Additional Transmitters/Receivers" steps.
• Shortened Transmission Range:
  • Metal objects can interfere with the wireless signal. Avoid placing the transmitter near large metal surfaces.
  • Ensure there are no significant obstructions (thick walls, large appliances) between the transmitter and receiver.
  • Check the transmitter battery. A low battery can reduce range.
• Transmitter Not Activating:
  • Ensure the transmitter battery is correctly installed and not depleted.
  • Confirm the transmitter and receiver are properly paired.
  • Check for physical damage to the transmitter.

명세서

Image: Visual representation of the doorbell's wireless range and IP55 waterproof rating.

보증 정보

ChunHee products are designed for reliability and performance. For specific warranty details, including coverage period and terms, please refer to the warranty card included in your product packaging or visit the official ChunHee web사이트. 보증 청구를 위해 구매 증빙 자료를 보관해 주세요.

고객 지원

If you encounter any issues or have questions regarding your ChunHee Wireless Dog Doorbell that are not addressed in this manual, please contact our customer support team. You can find contact information on the official ChunHee web사이트나 구매 플랫폼을 통해서도 구매하실 수 있습니다.

저희는 자사 제품에 대한 탁월한 서비스와 지원을 제공하기 위해 최선을 다하고 있습니다.