레프로 500014

Lepro LED 스트립 조명용 리모컨 사용 설명서 (색온도 조절 가능)

모델: 500014

소개

Thank you for choosing the Lepro Remote Controller for your Tunable White LED Strip Light. This manual provides detailed instructions for setting up, operating, and maintaining your remote control to ensure optimal performance and longevity. Please read this manual thoroughly before use and retain it for future reference.

제품 끝view

The Lepro Remote Controller is designed to provide convenient control over your tunable white LED strip lights, allowing you to adjust brightness, color temperature, and activate various lighting modes.

Lepro Remote Controller

이미지: 앞면 view of the Lepro Remote Controller.

리모컨 버튼 기능

Lepro Remote Controller Button Functions

Image: Diagram illustrating the functions of each button on the Lepro Remote Controller.

  • 켜기/끄기 버튼: Power on or off the LED strip light.
  • 60S OFF Button: Activates a 60-second auto-off timer.
  • 밝기 +/- 버튼: 조명의 밝기 수준을 조절합니다.
  • WW (Warm White) Button: Sets the light to a warm white color temperature.
  • NW (Neutral White) Button: Sets the light to a neutral white color temperature.
  • DW (Daylight White) Button: Sets the light to a daylight white (cool white) color temperature.
  • Colour Temperature +/- Buttons: Fine-tune the color temperature between warm and cool white.
  • MODE 버튼: Cycles through fast/slow flash modes.
  • Scene Buttons (Morning/Evening/Night): Activates pre-set lighting scenes.

설정

배터리 설치

The remote controller requires 1 Lithium Metal battery (included). Before first use, please remove the insulation sheet from the battery compartment.

Remove Insulation Sheet

Image: Illustration showing how to remove the insulation sheet from the battery compartment.

  1. 리모콘 뒷면에서 배터리함을 찾으세요.
  2. Pull out the plastic insulation sheet if it is present.
  3. If replacing the battery, open the battery cover and insert the new battery, ensuring correct polarity (+/-).
  4. 배터리 덮개를 단단히 닫으세요.

Pairing (If Applicable)

This remote control uses Radio Frequency (RF) technology and is typically pre-paired with compatible Lepro tunable white LED strip lights (e.g., models 410098, 410049). If your remote does not respond to the light strip, ensure the light strip is powered on and within the maximum range of 10 meters. No manual pairing procedure is usually required for this model.

작동 지침

Once the battery is installed, you can begin controlling your LED strip light.

  • 전원 켜기/끄기: 를 누르세요 ON 불을 켜는 버튼, 그리고 끄다 버튼을 눌러 끕니다.
  • 밝기 조정: 사용하세요 밝기 +/- buttons (sun icon with up/down arrows) to increase or decrease the light intensity.
  • 색온도 선택:
    • 누르다 WW for Warm White.
    • 누르다 NW for Neutral White.
    • 누르다 DW for Daylight White (Cool White).
    Color Temperature Examp레

    Image: Visual representation of Warm White, Natural White, and Cool White color temperatures.

  • Fine-tuning Color Temperature: 사용하세요 Colour Temperature +/- buttons (yellow up/down arrows) to incrementally adjust the color temperature.
  • 플래시 모드 : 를 누르세요 방법 button to cycle through different fast/slow flash modes.
  • 장면 모드: Select pre-set scenes using the dedicated buttons:
    • Morning Scene: (Sunrise icon)
    • Evening Scene: (Sunset icon)
    • 야경: (Moon and stars icon)
  • 60-Second Auto Off: 를 누르세요 60초 꺼짐 button to activate a timer that will turn off the light after 60 seconds.

유지

청소

To clean the remote controller, gently wipe it with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the remote in water.

배터리 교체

If the remote control's range decreases or it becomes unresponsive, the battery may need to be replaced. Refer to the "Battery Installation" section under Setup for instructions.

메모: 사용한 배터리는 현지 규정에 따라 책임감 있게 폐기하십시오.

문제 해결

문제가능한 원인해결책
Remote not responding to light strip.
  • 배터리가 방전되었거나 부족합니다.
  • Insulation sheet not removed.
  • 리모컨이 범위를 벗어났습니다.
  • Light strip is not powered on.
  • 배터리를 교체하세요.
  • 절연 시트를 제거합니다.
  • Move closer to the light strip (within 10 meters).
  • Ensure the light strip is properly connected and powered.
Limited range of control.
  • 배터리가 부족합니다.
  • Obstructions between remote and light strip.
  • 배터리를 교체하세요.
  • 시야를 확보하거나 장애물을 줄이십시오.

명세서

  • 모델: 500014
  • 상표: 나병
  • 제품 크기: 8.5 x 4 x 0.7cm
  • 무게: 20g
  • 배터리: 리튬 금속 배터리 1개 (필수)
  • 연결 기술 : 무선 주파수 (RF)
  • 최대 범위: 10 미터
  • 버튼 수: 14
  • 호환 장치: Lepro LED Strip Light 410098, LED Strip Light 410049

중요 정보

전구 재활용

For information on recycling this product and other types of lamps, please consult local recycling guidelines and facilities.

전구 파손 및 청소 정보

In case of breakage or damage to associated light bulbs, follow proper clean-up and disposal procedures as recommended by local authorities. Avoid direct contact with broken glass or internal components.

보증 및 지원

보증 정보 및 고객 지원에 대해서는 Lepro 공식 웹사이트를 참조하십시오. web사이트를 방문하거나 판매점에 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.

추가 지원이 필요하면 다음을 방문하세요. 아마존의 나병 전문 매장.