Parkside PDR 12 A1 Mobile Pressure Washer

소개

Thank you for choosing the Parkside PDR 12 A1 Mobile Pressure Washer. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read these instructions carefully before first use and keep them for future reference. This mobile pressure washer is designed for removing dirt, loam, and sand from various surfaces such as rims, shoes, and garden tools.

안전 지침

화재, 감전, 신체 상해의 위험을 줄이려면 전기 제품을 사용할 때 항상 기본적인 안전 예방 조치를 준수하세요.

• 모든 지침을 읽으십시오. 고압 세척기의 제어 방법과 올바른 사용법을 익혀보세요.
• 적절한 안전 장비를 착용하세요: Always wear eye protection and suitable clothing to protect against spray and debris.
• 어린이와 애완동물을 멀리하십시오. 어린이나 교육을 받지 않은 사람이 고압 세척기를 작동시키지 못하도록 하십시오.
• Avoid direct spray on people or animals: 고압 분사는 심각한 부상을 초래할 수 있습니다.
• 손상 여부를 확인하세요: Before each use, inspect the device, hose, and connections for any damage. Do not use if damaged.
• Use only clean water: Do not use corrosive liquids or chemicals that could damage the device or pose a health risk.
• 보안 연결: Ensure all hose and gun connections are securely fastened before operation.
• Protect from water ingress: Although splash-proof (IP44), avoid submerging the unit or exposing it to heavy rain.
• 배터리 안전: 내장형 리튬 이온 배터리에는 지정된 충전기만 사용하십시오. 배터리를 극한 온도나 직사광선에 노출시키지 마십시오.

제품 끝view 및 구성 요소

The Parkside PDR 12 A1 Mobile Pressure Washer consists of several key components designed for portability and ease of use.

주요 구성 요소는 다음과 같습니다.

• 메인 유닛: Houses the pump, battery, and control electronics.
• 이동할 수 있는 물 탱크: 5-liter capacity with a carrying handle.
• 분무기: Handheld with a flat jet nozzle for effective cleaning.
• 나선형 호스: Approximately 2.8 meters long, connects the unit to the spray gun.
• 12-Volt Car Connection Cable: 외부 전원 공급용.
• LED Charging Status Indicator: 배터리 충전량을 표시합니다.
• 보관함: Integrated into the housing for the hose and spray gun.

설정

1. 배터리 충전:
   • Before first use, fully charge the integrated lithium-ion battery using the supplied 60-minute fast charger.
   • Connect the charger to a suitable power outlet and to the charging port on the pressure washer.
   • The LED charging status indicator will show the charging progress. The charger features automatic charge cut-off to prevent overcharging.
2. 물 탱크 채우기:
   • Remove the 5-liter water tank from the main unit by lifting it using its carrying handle.
   • 탱크에 깨끗한 물을 채우세요. 최대 주입선을 넘지 않도록 하세요.
   • Place the filled water tank back into the main unit, ensuring it is securely seated.
3. Connect the Hose and Spray Gun:
   • Uncoil the spiral hose from its storage compartment.
   • Connect one end of the spiral hose to the outlet on the main unit and the other end to the spray gun. Ensure all connections are tight to prevent leaks.
4. Optional: Connect to 12-Volt Car Adapter:
   • If using the 12-volt car connection mode, plug the supplied cable into the designated port on the pressure washer and into your vehicle's 12V socket.
   • Ensure the vehicle's engine is running to provide stable power and prevent draining the car battery.

작동 지침

1. 전원 켜기:
   • Press the power button on the main unit to turn on the pressure washer. The LED indicator will illuminate.
   • If operating via the 12-volt car adapter, ensure the car engine is running.
2. 펌프 프라이밍:
   • Before spraying, point the spray gun in a safe direction and press the trigger until a steady stream of water emerges. This removes any air from the system.
3. 분무기 사용법:
   • Hold the spray gun firmly. The flat jet nozzle provides a wide spray pattern suitable for general cleaning.
   • Maintain a safe distance from the surface being cleaned to avoid damage. Start further away and move closer if more pressure is needed.
   • Always spray away from electrical components or sensitive areas.
4. 청소 절차:
   • Apply water to the surface to loosen dirt.
   • Work from top to bottom on vertical surfaces to allow dirt to run off.
   • For stubborn dirt, allow the water to soak for a few moments before rinsing.
5. 전원 끄기 :
   • After use, release the spray gun trigger.
   • Press the power button on the main unit to turn off the pressure washer.
   • If using the 12-volt car adapter, disconnect it from the vehicle's socket.
6. Depressurizing the System:
   • Point the spray gun in a safe direction and press the trigger to release any remaining pressure in the hose and gun.

유지

정기적인 유지관리는 고압 세척기의 수명과 최적의 성능을 보장합니다.

• 장치 청소: 매번 사용 후 고압 세척기 외부를 광고로 닦아주세요.amp 천. 연마성 세척제는 사용하지 마십시오.
• Drain and Store Water Tank: Empty any remaining water from the tank. Clean the tank if necessary and allow it to air dry before storage to prevent mold or odor.
• Hose and Spray Gun Storage: Coil the spiral hose neatly and store it, along with the spray gun, in the designated compartment on the unit.
• 배터리 관리 : For long-term storage, ensure the battery is partially charged (around 50-70%). Store the unit in a cool, dry place away from direct sunlight and extreme temperatures. Recharge the battery every few months if not in use to maintain its health.
• 연결 확인: Periodically inspect all hose and gun connections for wear or damage. Replace any worn parts immediately.

문제 해결

고압 세척기 사용 중 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.

이러한 해결 방법을 시도한 후에도 문제가 지속되면 고객 지원팀에 문의하세요.

명세서

보증 및 지원

For warranty information, please refer to the documentation provided with your purchase or visit the official Parkside website. If you require technical support or have questions not covered in this manual, please contact Parkside customer service.