모노 프라이스 139786

Monoprice 14AWG NEMA 5-15P to IEC 60320 C13 Power Cord User Manual

모델: 139786

소개

This manual provides essential information for the safe and effective use of your Monoprice 14AWG NEMA 5-15P to IEC 60320 C13 Power Cord. This power cord is designed to connect devices with an IEC 60320 C14 panel connector, such as PCs, monitors, scanners, and printers, to a standard North American AC wall outlet. Its 14AWG construction ensures robust power delivery for demanding applications.

안전 정보

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or damage to equipment.

설정

Follow these steps to properly set up your Monoprice power cord:

  1. 커넥터 식별: Locate the NEMA 5-15P (standard 3-prong wall plug) and the IEC 60320 C13 (female connector for devices) ends of the power cord.
  2. 장치에 연결: Insert the IEC 60320 C13 connector into the corresponding male IEC 60320 C14 inlet on your device (e.g., computer power supply, monitor). Ensure a firm connection.
  3. 전원에 연결 : Plug the NEMA 5-15P end of the power cord into a standard, grounded North American AC wall outlet, UPS, or other compatible AC power source.
Monoprice 3-Prong Power Cord with NEMA 5-15P plug and IEC 60320 C13 connector
Image: The Monoprice 3-Prong Power Cord, featuring the NEMA 5-15P plug and IEC 60320 C13 connector. This image illustrates the overall design and robust construction of the cable.

For a visual comparison of the cable's thickness and quality, please refer to the video below:

Video: This video demonstrates the significant thickness difference between the Monoprice 14AWG power cable and a standard power supply cable, highlighting the superior gauge for enhanced safety and power handling.

작동 지침

Once properly connected, the Monoprice power cord will supply power to your device. No further operational steps are required for the cord itself. Ensure your device's power switch is in the 'On' position if applicable.

유지

To ensure the longevity and safe operation of your power cord, follow these maintenance guidelines:

문제 해결

If you encounter issues with your power cord, refer to the following table:

문제가능한 원인해결책
장치에 전원이 공급되지 않음연결이 느슨함Ensure both ends of the power cord are fully inserted.
장치에 전원이 공급되지 않음전원 콘센트 문제콘센트를 다른 기기로 테스트하거나 회로 차단기를 확인하십시오.
장치에 전원이 공급되지 않음손상된 전원 코드Inspect the cord for damage. Replace if necessary.
끈이 따뜻하게 느껴져요과부하 또는 환기 불량Reduce the load on the circuit or ensure adequate airflow around the cord. If the cord is excessively hot, discontinue use immediately.

명세서

특징세부 사항
커넥터 1NEMA 5-15P (Male, Grounded)
커넥터 2IEC 60320 C13 (Female)
철사 게이지14와이어
현재 평가15 Amps(최대)
권tage 등급125V
재킷 타입SJT (Service Junior Thermoplastic)
색상검은색
제품 치수6.5 x 5.5 x 2인치(포장)
품목 무게2.88 온스
모델 번호139786
제조업체모노프라이스

보증 및 지원

Monoprice products are designed for reliability and performance. For specific warranty information, please refer to the documentation included with your purchase or visit the official Monoprice website. For technical support or further assistance, please contact Monoprice customer service through their official channels.

관련 문서 - 139786

사전view Monoprice 35435 Mini SLA Printer Firmware Update Guide
Step-by-step instructions for updating the firmware on the Monoprice 35435 Mini SLA Printer to the latest version.
사전view 모노프라이스 셀렉트 미니 3D 프린터 사용 설명서
모노프라이스 셀렉트 미니 3D 프린터의 안전 지침, 설치, 소프트웨어 설치(Cura, Repetier-Host), 작동 및 규정 준수에 대한 포괄적인 사용자 설명서입니다. 최적의 3D 프린팅을 위한 자세한 지침도 포함되어 있습니다.
사전view 유연한 개구부가 있는 Monoprice 케이블 플레이트, 2구, 검정색 - 빠른 설치 가이드(P/N 12583)
모노프라이스 케이블 플레이트(플렉서블 오프닝 포함, 2구, 검정색, 부품 번호 12583)의 단계별 설치 가이드입니다. 저전압 케이블을 안전하게 설치하는 방법을 알아보세요.tag평면 TV와 오디오/비디오 장치 뒤에 있는 케이블입니다.
사전view 모노프라이스 60W 볼륨 조절기(A/B 스위치 포함) 빠른 시작 가이드
Monoprice 60W 볼륨 조절기(A/B 스위치 포함, 부품 번호 38176)의 빠른 시작 가이드입니다. 이 문서에서는 두 개의 볼륨 조절기를 연결하는 방법을 설명합니다. amp앰프를 하나의 볼륨 컨트롤러로 통합하는 방법, 설치, 설정, 교정 및 기술 사양에 대한 정보입니다. 다음과 호환됩니다: amp최대 120와트의 앰프로, 스피커 한 쌍용으로 설계되었습니다.
사전view Monoprice Maker Ultimate 2 3D 프린터 빠른 시작 가이드
모노프라이스 메이커 얼티밋 2 3D 프린터(부품 번호 36045)의 빠른 시작 가이드입니다. 개봉, 설정, 메뉴 사용법, 첫 출력 방법 등을 다룹니다. FFF(Fast Forward) 인쇄 기능, 패키지 구성품, 고객 지원에 대한 정보도 확인하세요.
사전view 모노프라이스 메이커 셀렉트 3D 프린터 사용 설명서
이 사용 설명서는 Monoprice Maker Select 3D 프린터(모델 13860)의 설치, 작동 및 유지 관리에 대한 포괄적인 지침을 제공하며, 기능, 소프트웨어 및 기술 지원을 다룹니다.