소개
This manual provides comprehensive instructions for setting up, operating, and maintaining your Sharp Digital Alarm Clock (Model SPC387). This clock features a clear red LED display, dual alarms, an ascending alarm volume, and battery backup for continued operation during power outages. Designed for ease of use, it is suitable for all users.
그림 1: 전면 view of the Sharp Digital Alarm Clock, displaying 12:08 PM in red LEDs.
제품 특징
- Simple & Hassle-Free Operation: 사용 편의성을 위해 설계되었습니다.
- Easy-Set Dual Alarms: Program two separate alarm times.
- Gentle Ascending Alarm: 알람 볼륨이 점점 커집니다.
- 배터리 백업 : Maintains settings during power outages (requires 2x AA batteries, sold separately).
- Large Easy-Read Red LED Display: Bold, bright numbers for clear visibility.
Figure 2: Diagram illustrating the main features of the alarm clock, including the display size, dual alarm capability, ascending alarm, top controls, and battery backup option.
설치 지침
1. 전원 연결
Plug the AC power cord into a standard 120V AC wall outlet. The display will illuminate, and the clock will be ready for time setting.
2. 배터리 백업 설치
For battery backup, open the battery compartment cover located on the bottom of the unit. Insert two (2) new AA batteries (not included), observing the correct polarity (+ and -). Close the battery compartment cover. The battery backup feature will maintain time and alarm settings during a power interruption, but the display will not be illuminated.
Figure 3: The underside of the alarm clock, showing the battery compartment for backup power.
작동 지침
1. 시간 설정
- 를 누르고 계세요 시간 button. The time display will begin to flash.
- 를 잡고 있는 동안 시간 버튼을 누르세요 시간 버튼을 눌러 시간을 조정하세요. 오전/오후가 올바르게 설정되었는지 확인하려면 오후 표시기를 확인하세요.
- 을 계속 잡고 있는 동안 시간 버튼을 누르세요 분 버튼을 눌러 분을 조정합니다.
- 릴리스하다 시간 버튼을 눌러 시간을 설정합니다.
2. Setting the Alarm (Dual Alarm)
This clock supports two independent alarms (AL1 and AL2).
- 슬라이드 ALARM 1/2/DUAL switch to select either AL1 or AL2. The corresponding alarm indicator (AL1 or AL2) will illuminate on the display.
- 를 누르고 계세요 경보 button. The alarm time display will begin to flash.
- 를 잡고 있는 동안 경보 버튼을 누르세요 시간 button to adjust the alarm hour. Observe the PM indicator.
- 을 계속 잡고 있는 동안 경보 버튼을 누르세요 분 알람 시간을 조정하는 버튼입니다.
- 릴리스하다 경보 알람 시간을 설정하는 버튼입니다.
- 알람을 활성화하려면 다음을 확인하세요. 알람 ON / OFF switch is in the ON position. The selected alarm indicator (AL1 or AL2) will remain lit.
- To set the second alarm, repeat steps 1-6, selecting the other alarm (AL2 or AL1).
그림 4: 이상view of the control buttons on the top of the alarm clock for setting time and alarms.
3. 스누즈 기능 사용하기
알람이 울리면 큰 버튼을 누르세요 선잠 시계 상단에 있는 버튼을 누르세요. 알람이 일시적으로 멈추고 약 9분 후에 다시 울립니다.
4. 알람 끄기
알람을 완전히 끄려면 슬라이드하세요. 알람 ON / OFF switch to the OFF position. The alarm indicator (AL1 or AL2) will turn off.
5. Ascending Alarm Volume
The alarm starts at a low volume and gradually increases, providing a gentle wake-up experience. If not turned off, the alarm will continue to increase in volume and frequency.
Figure 5: The alarm clock positioned on a nightstand, illustrating its compact size and the ascending alarm feature.
유지
- 부드럽고 마른 천으로 시계를 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
- 극한의 온도, 직사광선 또는 높은 습도에 장치를 노출시키지 마십시오.
- Replace backup batteries annually to ensure reliable performance.
문제 해결
| 문제 | 해결책 |
|---|---|
| 디스플레이가 비어 있습니다. | Ensure the AC power cord is securely plugged into a working outlet. If using battery backup, the display will not light up; it only preserves settings. |
| 알람이 울리지 않습니다. | 확인해보십시오 알람 ON / OFF switch is in the ON position. Verify the alarm time is set correctly and the PM indicator is accurate. |
| Time/Alarm settings are lost after power outage. | Ensure fresh AA batteries are installed correctly in the battery backup compartment. |
| Clock feels hot. | Unplug the clock immediately and discontinue use. Contact customer support. |
| Alarm is too quiet/loud. | The alarm volume is ascending. Allow time for it to increase. There is no manual volume adjustment. |
| 잘못된 볼륨tage warning (UK/Gulf regions). | This clock is designed for 110V-120V AC power. It is not compatible with 220V-240V systems without a proper voltage converter. Using an incorrect voltage may damage the unit and pose a safety risk. |
명세서
- 상표: 날카로운
- 모델: SPC387
- 색상: Black - Red LED
- 디스플레이 유형: 디지털 LED
- 제품 크기: 폭 5.5인치 x 높이 2.1인치
- 전원: Electrical (AC) with Battery Backup (2x AA batteries, not included)
- 재료: 플라스틱
- 품목 무게: 8.8 온스
- 특징: Dual Alarm, Ascending Alarm Volume, Snooze Function
보증 및 지원
This product comes with a Limited Warranty from Sharp. For detailed warranty information or technical support, please refer to the documentation included in your product packaging or visit the official Sharp web대지.
For further assistance, you may also contact the seller, The Clock Shop - Sharp, through their Amazon store page.
제조업체 : SHARP
