1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of your iBeam Micro Camera Black Fixed Angle (Model TE-MICM). This camera is designed to enhance vehicle safety by providing clear visual assistance. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. 안전 정보
- 전기 설비를 시작하기 전에 항상 차량의 배터리를 분리하세요.
- 단락이나 손상을 방지하기 위해 모든 배선이 적절하게 절연되고 고정되었는지 확인하십시오.
- 운전자의 시야를 방해하지 마십시오. view 또는 설치 중에 차량 제어 장치에 간섭을 일으킬 수 있습니다.
- 설치 과정의 어떤 부분이든 확실하지 않은 경우 전문 설치자에게 문의하세요.
- This product is intended as an aid and should not replace safe driving practices.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- iBeam Micro Camera Black Fixed Angle (TE-MICM)
- Mounting Hardware (8MM threaded bolt, nuts, washers)
- 배선 마구
- 사용 설명서(본 문서)
Image: The retail packaging for the iBeam Micro Camera, showing the camera and its model number on the box.
4. 제품 오버view
The iBeam Micro Camera (TE-MICM) is a compact, fixed-angle camera designed for various vehicle applications, including backup assistance. It features a durable, water-resistant design and provides a clear image for enhanced visibility.
이미지: 클로즈업 view of the iBeam Micro Camera, highlighting its compact black housing and the camera lens.
주요 특징:
- 컴팩트한 디자인: Small footprint for discreet installation.
- 방수: IP68 등급을 획득하여 다양한 기상 조건에서 안정적인 성능을 제공합니다.
- 이미지 센서: 1/4 CMOS image sensor for clear video output.
- Switchable Image: Mirror/Normal image option for versatile mounting (e.g., rear view 또는 앞 view).
- 설치: Features an 8MM threaded bolt for secure mounting.
5. 설정 및 설치
Follow these steps for proper installation of your iBeam Micro Camera:
- 장착 위치 선택: Select a location that provides an unobstructed view and allows for secure mounting. Common locations include above the license plate, on the bumper, or integrated into a vehicle panel. Consider the 18.7mm height of the camera housing for clearance.
- 장착 표면 준비: If drilling is required, ensure no existing wiring or components will be damaged. Drill a hole appropriate for the 8MM threaded bolt.
- 카메라 장착: Insert the 8MM threaded bolt through the prepared hole and secure the camera using the provided nuts and washers. Ensure the camera is oriented correctly for the desired view.
- 배선 연결:
- Connect the camera's power wire (typically red) to a 12V power source that is activated when the camera is needed (e.g., reverse light circuit for a backup camera, or ignition-switched power for a front camera).
- Connect the camera's ground wire (typically black) to a clean chassis ground point.
- Connect the video output cable from the camera to the video input of your display monitor or head unit.
- 테스트 기능: Before reassembling vehicle panels, test the camera's operation. Turn on the vehicle and engage the appropriate gear (e.g., reverse) to activate the camera. Verify that the image appears clearly on your display.
- 안전한 배선: Route all cables safely away from moving parts, heat sources, and sharp edges. Use zip ties or electrical tape to secure wiring.
Image: Illustration showing two common mounting options for the iBeam Micro Camera: a flush mount and a lip mount using the threaded bolt.
6. 사용 설명서
Once installed, the iBeam Micro Camera operates automatically when power is supplied to it and the connected display is active.
- Backup Camera Use: If connected to the reverse light circuit, the camera image will automatically appear on your display when the vehicle is shifted into reverse.
- Front/Side Camera Use: If connected to an ignition-switched power source or a manual switch, the camera can be activated as needed.
- 이미지 방향 : The camera supports switchable mirror/normal image output. Refer to your installer or the camera's wiring diagram for instructions on how to change this setting, typically by cutting a specific wire loop.
7. 유지관리
The iBeam Micro Camera is designed for low maintenance. Follow these guidelines to ensure longevity:
- 청소: 카메라 렌즈는 주기적으로 부드러운 천으로 닦아주세요.amp 먼지, 흙 또는 물 얼룩을 제거하기 위한 천으로 막힘을 방지합니다. view. Do not use abrasive cleaners.
- 점검: Regularly check the camera's mounting and wiring connections to ensure they remain secure and free from damage.
- 고압 세척을 피하십시오: While water-resistant, avoid directing high-pressure water sprays directly at the camera lens or housing, as this could potentially compromise the seal.
8. 문제 해결
If you experience issues with your iBeam Micro Camera, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 이미지가 표시되지 않습니다 | No power to camera or display; Loose video connection; Incorrect video input selected on display. | 전원 및 접지 연결을 확인하십시오. 비디오 케이블이 제대로 연결되어 있는지 확인하십시오. 모니터에서 올바른 비디오 입력을 선택하십시오. |
| 깜빡이거나 왜곡된 이미지 | Poor power connection; Ground loop interference; Damaged video cable. | Verify power and ground connections are solid; Install a ground loop isolator if necessary; Inspect video cable for damage. |
| Image is reversed (mirror vs. normal) | Incorrect image setting. | Adjust the mirror/normal image setting on the camera (refer to wiring diagram for specific wire to cut/connect). |
| 이미지가 흐릿하거나 불분명합니다 | Dirty lens; Condensation on lens; Damaged camera. | Clean the camera lens; Allow time for condensation to dissipate; If persistent, camera may be damaged and require replacement. |
9. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델명 | iBeam Micro Camera Black Fixed Angle |
| 모델 번호 | TE-MICM |
| 이미지 센서 | 1 / 4 CMOS |
| 방수성 | IP68 |
| 설치 | 8MM threaded bolt |
| Camera Housing Height | 18.7mm |
| 이미지 출력 | Switchable Mirror/Normal |
| 색상 | 검은색 |
| 제품 치수 | 포장 치수는 약 9 x 6 x 0.5인치입니다. |
| 품목 무게 | 포장 무게 기준 약 2파운드 |
10. 보증 및 지원
For warranty information and technical support, please contact iBeam customer service or visit the official iBeam web사이트. 보증 청구에 대비해 구매 증빙 자료로 구매 영수증을 보관하세요.
제조업체: 메트라 일렉트로닉스 주식회사
