에포메이커 i610T

EPOMAKER Ajazz i610T 61키 블루투스 기계식 키보드 사용 설명서

Model: i610T

소개

The EPOMAKER Ajazz i610T is a compact 61-key mechanical keyboard designed for versatility and performance. It features dual-mode connectivity, allowing for both Bluetooth wireless and wired (Type-C) operation. This manual provides detailed instructions for setting up, operating, and maintaining your keyboard to ensure optimal performance and longevity.

Key features include N-key rollover, 17 distinct backlight effects, and a professional chip for responsive input, suitable for both gaming and general use. The ergonomic design with varying keycap heights aims to enhance typing comfort during extended use.

패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

제품 끝view

The Ajazz i610T features a 60% layout, providing a compact form factor while retaining essential functionalities through FN key combinations. The keyboard is equipped with mechanical switches for a tactile typing experience and a monochrome backlight.

EPOMAKER Ajazz i610T 61-key mechanical keyboard, top-down view

그림 1: 위에서 아래로 view of the Ajazz i610T keyboard, showing the 61-key layout.

EPOMAKER Ajazz i610T 61키 기계식 키보드, 각도 조절 가능 view from front-left

그림 2: 각진 view of the Ajazz i610T keyboard, highlighting its compact design.

설정

1. 키보드 충전

Before first use, it is recommended to fully charge the keyboard. Connect the supplied Type-C USB cable to the keyboard's Type-C port and the other end to a USB power source (e.g., computer USB port, USB wall adapter). The keyboard has a 1000mAh battery capacity.

2. 유선 모드 연결

To use the keyboard in wired mode, simply connect the Type-C USB cable from the keyboard to your computer's USB port. The keyboard will be automatically detected and ready for use. In wired mode, the keyboard will also charge its internal battery.

3. Bluetooth Mode Pairing

The Ajazz i610T can connect to up to three Bluetooth devices simultaneously. Follow these steps to pair with a device:

  1. 키보드의 전원이 켜져 있는지 확인하세요.
  2. 누르고 있으세요 FN+Q, FN + 승, 또는 FN + 전자 for 3-5 seconds to enter pairing mode for the desired Bluetooth channel. The corresponding key (Q, W, or E) will flash rapidly, indicating it is ready to pair.
  3. 기기(컴퓨터, 태블릿, 스마트폰)에서 Bluetooth를 활성화하고 새로운 기기를 검색하세요.
  4. Select "Ajazz i610T" from the list of available devices.
  5. Once paired, the flashing light on the Q/W/E key will become solid or turn off, indicating a successful connection.

페어링된 Bluetooth 장치 간에 전환하려면 간단히 누르세요. FN+Q, FN + 승, 또는 FN + 전자 briefly (do not hold) to select the desired channel.

작동 지침

1. Function Key (FN) Combinations

Due to its compact 61-key layout, many functions are accessed via the FN key in combination with other keys. Refer to the keycaps for secondary functions, often indicated by smaller legends.

2. 백라이트 제어

The keyboard features a monochrome backlight with 17 different lighting effects. Use the following FN key combinations to control the backlight:

유지

적절한 유지관리는 키보드의 수명과 성능을 보장합니다.

문제 해결

If you encounter issues with your Ajazz i610T keyboard, refer to the following common solutions:

문제해결책
유선 모드에서 키보드가 응답하지 않습니다.
  • USB Type-C 케이블이 키보드와 컴퓨터에 모두 단단히 연결되어 있는지 확인하세요.
  • 컴퓨터의 다른 USB 포트를 사용해 보십시오.
  • 가능하다면 다른 Type-C 케이블로 테스트해 보세요.
  • Ensure the keyboard is not in Bluetooth mode (some keyboards have a physical switch or FN combination to toggle).
Bluetooth를 통해 연결할 수 없습니다.
  • 키보드가 충전되어 있는지 확인하세요.
  • Make sure the keyboard is in Bluetooth pairing mode (FN+Q/W/E held for 3-5 seconds).
  • Check that Bluetooth is enabled on your device and it is discoverable.
  • Remove any previous "Ajazz i610T" pairings from your device's Bluetooth settings and try pairing again.
  • 다른 블루투스 채널(Q, W 또는 E)에 연결해 보세요.
  • Ensure the keyboard is within the 10-meter transmission range.
백라이트가 작동하지 않거나 멈춰 있습니다.
  • Ensure the backlight brightness is not set to minimum (FN + ] } to increase).
  • Cycle through backlight effects using FN + \ |.
  • Perform a factory reset (hold FN + Spacebar for 3 seconds).
일부 키가 작동하지 않습니다.
  • Check if the Windows key is locked (FN + WIN).
  • Perform a factory reset (hold FN + Spacebar for 3 seconds).
  • Ensure the keyboard is clean and there's no debris under the keycap.

명세서

특징세부 사항
상표에포메이커 / 아재즈
모델i610T
재료ABS
색상Black (Blue Switch variant)
스위치 유형Blue Switch (as per product title)
인터페이스 유형C타입
전송 모드USB 유선, 블루투스 3.0
키의 개수61
백라이트Monochrome backlight (17 kinds of light effects)
배터리 용량1000mAh(리튬 이온)
케이블 길이약. 1.5 분
운영 체제 지원윈도우 2000/XP/비스타/7/8/10
품목 치수(L*W*H)29.1 x 10.1 x 4cm(11.46 x 3.98 x 1.57인치)
품목 무게약 580g(20.46온스)

보증 및 지원

EPOMAKER products are designed and manufactured to the highest quality standards. For information regarding warranty coverage and technical support, please refer to the official EPOMAKER web웹사이트를 방문하거나 판매점에 문의하세요. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.

추가 지원이 필요하면 다음을 방문하세요. Amazon의 EPOMAKER 스토어.

관련 문서 - i610T

사전view EPOMAKER TH80 PRO 빠른 시작 가이드
75% 핫스왑 가능한 RGB 기계식 게이밍 키보드, EPOMAKER TH80 PRO로 빠르게 시작해 보세요. 이 가이드에서는 설정, 연결 옵션(유선, 블루투스, 2.4GHz), 주요 기능 및 기본적인 문제 해결 방법을 다룹니다.
사전view EPOMAKER HE68 65% 홀 효과 RGB 아날로그 키보드 빠른 시작 가이드
이 가이드에서는 EPOMAKER HE68 65% 홀 효과 RGB 아날로그 키보드에 대한 설정 지침, 기능 키 조합, 조명 제어, 빠른 트리거 사용자 정의 및 스위치 교체 절차를 제공합니다.
사전view EPOMAKER x AULA F75 키보드 기술 사양
EPOMAKER x AULA F75 키보드에 대한 자세한 기술 사양에는 연결 옵션, 주요 세부 정보, 전원 요구 사항, 치수 및 패키지 내용이 포함됩니다.
사전view EPOMAKER TH80-X 기계식 키보드 사용 설명서
EPOMAKER TH80-X 기계식 키보드 사용에 대한 포괄적인 가이드로, 무선 연결, 소프트웨어 상호작용, 백라이트 사용자 정의, GIF/사진 업로드 등에 대한 내용을 담고 있습니다.
사전view Epomaker Alice 기계식 키보드 빠른 시작 가이드
Epomaker Alice 기계식 키보드에 대한 빠른 시작 가이드로, 설정, 단축키, 조명 효과, VIA 소프트웨어 사용자 정의, 스위치 교체, 공장 초기화, 사양, 지원 및 보증 정보를 다룹니다.
사전view EPOMAKER EP84: 75% 핫스왑 기계식 키보드 빠른 시작 가이드
EPOMAKER EP84 75% 핫스왑 기계식 키보드를 사용해 보세요. 이 가이드에서는 설정, 기능, 단축키, 스위치 교체 방법을 다룹니다.