Luxul P40 듀얼 밴드 무선 범위 확장기 사용 설명서

1. 서론

The Luxul P40 AC1200 WiFi Bridge + Range Extender is designed to expand the coverage of your existing wireless network. It offers two primary operational modes: a bridge link for connecting Ethernet-enabled devices to your WiFi network, and a range extender to eliminate wireless dead zones. This device is compact, plugs directly into a standard power outlet, and is suitable for both home and small office environments. It supports 802.11ac technology, providing speeds up to 1200Mbps (300Mbps on 2.4GHz and 867Mbps on 5GHz), and is backward compatible with 802.11a/b/g/n devices.

2. 안전 정보

• 기기를 물이나 과도한 습기에 노출시키지 마세요.
• 기기를 직접 열거나 수리하지 마십시오. 모든 정비는 자격을 갖춘 기술자에게 맡기십시오.
• 기기 주변의 환기가 잘 되도록 하십시오. 통풍구를 막지 마십시오.
• 이 장치에 지정된 전원만 사용하십시오.
• 장치를 열원이나 직사광선으로부터 멀리 두십시오.

3. 패키지 내용

패키지에 다음 품목이 포함되어 있는지 확인하십시오.

• Luxul P40 Dual Band Wireless Range Extender
• 이더넷 케이블

4. 디바이스 오버view

Familiarize yourself with the physical features of your Luxul P40 device.

This image displays the Luxul P40 device. The front panel features LED indicators for 5G, 2.4G, LAN, Client, Repeater, and Power (PWR). Below the LEDs is a circular button labeled 'LEDs/Reset'. The bottom of the device includes an Ethernet port and power prongs for wall outlet connection.

LED 표시등

• 5세대: 5GHz 무선 대역에서의 활동을 나타냅니다.
• 2.4세대: 2.4GHz 무선 대역에서의 활동을 나타냅니다.
• LAN : Indicates activity on the Ethernet (LAN) port.
• 고객: Illuminates when the device is operating in Client (Bridge) mode.
• 연발총: Illuminates when the device is operating in Repeater (Range Extender) mode.
• PWR(전원): 장치의 전원이 켜져 있음을 나타냅니다.

버튼 및 포트

• LEDs/Reset Button: A multi-function button. A short press may toggle LED status (if supported). A long press (typically 10-15 seconds) will reset the device to factory default settings.
• 이더넷 포트 : Used for connecting wired devices in Bridge mode or for initial setup.
• Power Prongs: For direct connection to a standard electrical outlet.

5. 설정

The Luxul P40 can be configured as a Wireless Range Extender (Repeater Mode) or a Wireless Bridge (Client Mode). The setup process typically involves connecting the device to power, accessing its web-based interface, and configuring the desired mode.

초기 파워업

1. Plug the Luxul P40 into a standard electrical outlet in a central location, ideally halfway between your wireless router and the area where you need extended coverage.
2. Wait for the PWR LED to illuminate, indicating the device is powered on.

Configuration (General Steps)

Specific configuration steps may vary. Refer to the full user manual available on the Luxul website for detailed instructions. Generally, the process involves:

1. Connect a computer to the P40 via an Ethernet cable, or connect wirelessly to the P40's default Wi-Fi network (SSID and password usually found on a label on the device).
2. 열기 web browser and navigate to the P40's default IP address (e.g., 192.168.0.1 or luxul.extender). Consult the device label or manufacturer's documentation for the exact address.
3. Log in using the default username and password (also typically found on the device label or in documentation).
4. Follow the on-screen setup wizard to select your desired operating mode (Repeater or Client).
5. If selecting Repeater mode, scan for your existing Wi-Fi network, select it, and enter its password.
6. If selecting Client mode, scan for your existing Wi-Fi network, select it, enter its password, and then connect your wired device to the P40's Ethernet port.
7. 설정을 저장하고 메시지가 표시되면 기기를 다시 시작하십시오.

6. 작동 모드

Repeater Mode (Range Extender)

In Repeater mode, the Luxul P40 extends the coverage of your existing wireless network. It receives the wireless signal from your main router and re-broadcasts it, effectively expanding the range of your Wi-Fi. This mode is ideal for eliminating Wi-Fi dead zones in your home or office.

Client Mode (Wireless Bridge)

In Client mode, the Luxul P40 acts as a wireless bridge. It connects to your existing Wi-Fi network wirelessly and provides an Ethernet port for connecting a wired device (e.g., a smart TV, gaming console, or desktop computer) that does not have built-in Wi-Fi capabilities. This allows wired devices to access the internet through your wireless network.

7. 유지관리

• 펌웨어 업데이트: Periodically check the Luxul web펌웨어 업데이트 사이트입니다. 기기의 펌웨어를 최신 상태로 유지하면 최적의 성능, 보안 및 새로운 기능 이용이 보장됩니다.
• 청소: 부드럽고 마른 천을 사용하여 기기 외부를 닦으세요. 액체 세척제나 에어로졸은 사용하지 마세요.
• 놓기: Ensure the device is placed in an area with good airflow to prevent overheating. Avoid placing it near obstructions or other electronic devices that may cause interference.

8. 문제 해결

전원 없음 (전원 LED 꺼짐)

• Ensure the device is securely plugged into a working electrical outlet.
• 다른 장치로 콘센트를 테스트하여 전원이 들어오는지 확인하세요.

Cannot Connect to Wi-Fi / No Internet Access

• Verify that your main router is powered on and broadcasting a Wi-Fi signal.
• Ensure the P40 is within range of your main router. Try moving it closer.
• Confirm that you entered the correct Wi-Fi password during setup.
• If in Repeater mode, check the 5G and 2.4G LEDs for activity.
• Try restarting both your main router and the P40.
• Perform a factory reset on the P40 by pressing and holding the LEDs/Reset button for 10-15 seconds, then reconfigure it.

느린 연결 속도

• Relocate the P40 to a position that offers a stronger signal from your main router, ideally halfway between the router and the desired coverage area.
• 다른 전자 기기(예: 전자레인지, 무선 전화기)의 간섭을 최소화하세요.
• Ensure your main router is operating on optimal channels.
• Check for firmware updates for both your router and the P40.

9. 사양

10. 보증 및 지원

보증 정보

For detailed warranty information regarding your Luxul P40 device, please refer to the official Luxul website or the warranty card included with your product at the time of purchase. Warranty terms and conditions may vary by region and retailer.

기술 지원

If you encounter any issues that cannot be resolved using this manual, or require further assistance, please visit the official Luxul support webFAQ, 문제 해결 가이드, 기술 지원을 위한 연락처 정보를 제공하는 사이트입니다.

Luxul Official Web대지: www.luxul.com