소개
The SONICAKE Noise Wiper is a compact and effective noise gate effects pedal designed for guitarists. It helps eliminate unwanted hum and hiss from your signal chain, ensuring a cleaner and more professional sound. Featuring two distinct modes and a true bypass design, this pedal offers versatile noise reduction without compromising your tone.
주요 특징
- 100% Analog Design: Maintains original tone and dynamics while suppressing noise.
- Easy-to-Use One Knob Control: Simple Threshold knob for main function adjustment.
- 두 가지 작동 모드: Select between FAST for quick noise gate response or MILD for smoother noise reduction.
- 트루 바이패스 풋스위치: Ensures a clean signal path when the effect is disengaged.
- 9V Center Negative Power: 표준 페달 전원 공급 장치(별도 구매)와 호환됩니다.
상자 안에 무엇이 들어있나요?
- SONICAKE Noise Gate Effects Pedal
제품 끝view & 컨트롤
앞쪽 view of the SONICAKE Noise Wiper Noise Gate Pedal, showing its compact design and controls.
모드 스위치: Toggles between FAST (faster noise gate response) and MILD (smoother noise gate response).
Threshold Knob: Controls the noise gate threshold, determining at what signal level the gate engages.
풋스위치: Engages or disengages the noise gate effect. Features true bypass for signal integrity.
DC 9V 입력: Connect a 9V DC center-negative power supply (not included) here.
설정
- 전원 연결: Connect a 9V DC center-negative power adapter to the DC 9V input jack on the pedal.
- 기기 입력: Connect your guitar or other instrument to the 'IN' jack of the Noise Wiper pedal using a standard 1/4-inch instrument cable.
- 출력 Amp정수기: Connect the 'OUT' jack of the Noise Wiper pedal to your amplifier's input or to the next pedal in your effects chain using a standard 1/4-inch instrument cable.
- 신호 체인의 배치: For optimal noise reduction, place the Noise Wiper pedal after any high-gain pedals (e.g., distortion, overdrive, fuzz) that generate significant noise, but before time-based effects (e.g., delay, reverb) to prevent cutting off their trails.
작동 모드
The Noise Wiper pedal features a toggle switch to select between two operating modes:
- FAST Mode: Provides a quicker and more aggressive noise gate response. This mode is ideal for high-gain settings where immediate and decisive noise cutoff is desired.
- MILD Mode: Offers a smoother and more gradual noise gate response. This mode is suitable for lower-gain settings or when a more natural decay of notes is preferred.
사용하세요 Threshold knob to adjust the sensitivity of the noise gate. Turning the knob clockwise increases the threshold, meaning the gate will engage at a higher signal level, cutting out more subtle noise. Turning it counter-clockwise lowers the threshold, allowing more signal to pass through before the gate engages.
비디오 데모
Video: Sonicake Noise Gate Pedal demonstration by JFOUT. This video showcases the pedal's noise reduction capabilities in various settings.
명세서
| 품목 무게 | 7.7온스(0.22킬로그램) |
| 제품 치수 | 3.68 x 1.65 x 2.05인치(2.05인치 길이 x 1.65인치 너비 x 3.68인치 높이) |
| 모델 번호 | QSS11-20 |
| 본체 소재 | 플라스틱 |
| 색상 | Noise Gate (Black) |
| 커넥터 유형 | 1/4인치(6.35mm) 오디오 잭 |
| 하드웨어 인터페이스 | 1/4인치 오디오 |
| 신호 형식 | 비슷한 물건 |
| 전원 | 코드식 전기 |
| 권tage | 9 볼트 |
| 첫 번째 이용 가능 날짜 | 2년 2020월 XNUMX일 |
유지
To ensure the longevity and optimal performance of your SONICAKE Noise Wiper pedal, follow these maintenance guidelines:
- 청소: 페달 외부를 닦을 때는 부드럽고 마른 천을 사용하십시오. 연마성 세척제나 용제는 마감재나 내부 부품을 손상시킬 수 있으므로 사용하지 마십시오.
- 저장: Store the pedal in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. Disconnect the power supply and instrument cables when not in use for extended periods.
- 케이블 관리 : Ensure all cables are properly coiled and not excessively bent or strained to prevent damage to the jacks and internal wiring.
문제 해결
- 전원 없음: Ensure the 9V DC power supply is correctly connected and functioning. Check the power outlet and the power cable for any damage.
- 소리 없음: Verify all instrument cables are securely connected to the correct input and output jacks. Test cables with another device to ensure they are not faulty. Check your amp리파이어 설정.
- 과도한 소음/험: Ensure the pedal is properly grounded. Experiment with the Threshold knob and Mode switch (FAST/MILD) to find the optimal setting for your setup. Try placing the pedal in different positions within your signal chain.
- 효과가 나타나지 않음: Press the footswitch firmly. If the indicator light does not illuminate, check power and connections.
보증 및 지원
보증 정보, 기술 지원 또는 서비스 문의는 SONICAKE 공식 웹사이트를 참조하십시오. web사이트를 방문하거나 고객 지원팀에 직접 문의하세요. 보증 청구에 대비해 구매 증빙 자료로 구매 영수증을 보관하세요.