소개
This manual provides detailed instructions for the installation, operation, and maintenance of your StarTech.com Desk Mount Dual Monitor Arm (ARMSLIMDUAL2USB3). This product is designed to mount two 17-inch to 32-inch VESA compatible monitors, each weighing up to 17.6 lb (8 kg), onto a single low-profile base. It offers flexible desk-clamp or grommet-hole mounting options, optimizing desk space and promoting an ergonomic workspace.
그림 1: 전면 view of the StarTech.com Desk Mount Dual Monitor Arm, showing the dual VESA mounts, articulating arm, and base with USB and audio ports.
상자 안에 무엇이 들어있나요?
Carefully unpack the contents and ensure all items listed below are present and undamaged. If any parts are missing or damaged, contact StarTech.com support.
- 1 x 베이스 클amp 집회
- 1 x Lower Arm
- 1 x Upper Arm
- 1 x 크로스바
- VESA 마운트 2개
- 1 x 손잡이
- 1 x Grommet Plate
- 베이스 플레이트 1개
- 1 x Adhesive Foam Pad
- 1 x Cable Management Clip, Base
- 4 x Button Head Hex Screws
- 2 x Flat Head Hex Screws
- 1 x 3mm Hex Key
- 1 x 4mm Hex Key
- 1 x 6mm Hex Key
- 8 x M4 x 12 나사
- 8 x M5 x 12 나사
- 8 x 와셔
- 4 x Countersunk Hex Screws
- 1 x Grommet Screw
- 1 x Upper C Clamp 까치발
- 1 x Lower C Clamp 집회
설정 및 설치
모니터 암은 C-cl 두 가지 설치 방식을 제공합니다.amp or grommet mount. Choose the method that best suits your desk setup.
C-Clamp 설치
- Attach the Base Clamp Assembly to the edge of your desk (10 mm-85 mm thickness). Ensure it is securely tightened.
- Insert the Lower Arm into the base.
- Connect the Upper Arm to the Lower Arm.
- Attach the Cross Bar to the Upper Arm.
- Secure the VESA Mounts to your monitors using the provided M4 or M5 screws and washers.
- Slide the VESA mounted monitors onto the Cross Bar.
- Attach the Grab Handle to the designated slot on the arm.
- Route cables through the integrated cable management clips.
그로밋 마운트 설치
- C-cl을 분해하세요amp components from the base if they are pre-attached.
- Attach the Grommet Plate and Base Plate to the bottom of the base, securing with the Grommet Screw.
- Insert the base through an existing grommet hole in your desk.
- Secure the base from underneath the desk using the appropriate hardware.
- C-Cl의 2~7단계를 따르십시오.amp Installation for assembling the arm, crossbar, and attaching monitors.
그림 2: 측면 view illustrating the articulating arm and the C-clamp mounting mechanism on a desk.
그림 3: 후면 view showing the VESA mounting plates and the horizontal crossbar for monitor attachment.
작동 지침
The monitor arm provides a wide range of motion for optimal viewing and ergonomic comfort.
모니터 조정
- 높이 조정: Use the spring-assisted arm and the sturdy handle to adjust the monitor height up to a maximum of 23.4 inches from the desk. The toolless adjustable height range is 13 inches.
- 경사: Each monitor can be tilted +/- 10 degrees to reduce glare and achieve a comfortable view잉 각도.
- 받침: The arm allows for +/- 90 degrees of swivel motion, enabling easy screen sharing or repositioning.
- 회전: Rotate each display 180 degrees for portrait or landscape view주고받음.
- 수평 정렬: The sliding horizontal crossbar allows for precise alignment of your two monitors.
통합 연결성
The base of the monitor arm includes convenient pass-through ports:
- 2 x USB 3.0 (USB-A 3.1 Gen 1 5Gbps) Ports: Connect your USB peripherals directly to the monitor arm, extending the ports from your PC or laptop.
- 2 x 3.5mm Audio/Mic Jacks: Easily connect headphones, speakers, or a microphone.
Ensure the USB and audio cables from the monitor arm's base are connected to the corresponding ports on your computer for these features to function.
유지
To ensure the longevity and optimal performance of your monitor arm, follow these simple maintenance guidelines:
- 청소: Wipe the surface of the monitor arm with a soft, dry cloth. For stubborn marks, a slightly damp 순한 비누를 묻힌 천을 사용하여 닦은 후 말리세요. 연마성 세제나 용제는 사용하지 마세요.
- 정기 점검: 모든 나사와 연결부가 단단히 조여져 있는지 주기적으로 점검하십시오. 필요한 경우 다시 조이십시오.
- 케이블 관리 : Ensure cables are neatly routed through the integrated cable management system to prevent strain or damage.
문제 해결
This section addresses common issues you might encounter with the monitor arm.
- 모니터 수평이 맞지 않음: If your monitors appear uneven, ensure they are properly seated on the VESA mounts and that the horizontal crossbar is adjusted correctly. Slight adjustments to the individual VESA mounts or the crossbar's position may be needed.
- 팔이 제자리를 유지하지 못합니다: If the arm sags or does not stay at the desired height, the tension may need adjustment. Use the provided hex keys to adjust the articulation tension as per the instructions in the assembly guide.
- Limited Monitor Angle/Curve Alignment: For curved monitors, the maximum tilt and swivel angles of the VESA mounts might limit how closely the curves can align. Experiment with the sliding crossbar and individual monitor angles to find the best possible alignment.
- USB/Audio Ports Not Functioning: Verify that the USB and audio cables extending from the monitor arm's base are securely connected to the corresponding ports on your computer. Ensure your computer's drivers are up to date.
명세서
| 특징 | 사양 |
|---|---|
| 제품 치수 | 28.5 x 32.7 x 29.9 인치 |
| 품목 무게 | 1.12 온스 |
| 모델 번호 | ARMSLIMDUAL2USB3 |
| 장착 유형 | 탁상용 마운트(C-Cl)amp/그로밋) |
| 이동 유형 | 관절 |
| 재료 | 알류미늄 |
| 색상 | 검은색 |
| 호환 장치 | Flat-screen displays (monitors, televisions) |
| 최대 모니터 크기 | 32인치 |
| 중량 용량(화면당) | 17.6파운드(8kg) |
| VESA 호환성 | 75x75mm, 100x100mm |
| 최대 기울기 각도 | 10도 |
| USB 포트 | 2 x USB 3.0 (USB-A 3.1 Gen 1 5Gbps) |
| 오디오 포트 | 2 x 3.5mm Audio/Mic Jacks |
| 한국어: | 065030888301 |
보증 및 지원
The StarTech.com Desk Mount Dual Monitor Arm (ARMSLIMDUAL2USB3) is backed by a 2-year StarTech.com warranty.
StarTech.com conducts thorough compatibility and performance testing on all products to ensure they meet or exceed industry standards. For technical assistance, free lifetime technical support is available. Please visit the official StarTech.com web연락처 정보와 추가 지원 리소스는 사이트에서 확인하세요.
