OFFNOVA RC12

OFFNOVA Gen2 Comb Binding Machine Instruction Manual

모델: RC12

브랜드: 오프노바

1. 서론

Thank you for choosing the OFFNOVA Gen2 Comb Binding Machine. This manual provides essential information for the safe and efficient operation, setup, and maintenance of your binding machine. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.

2. 안전 정보

  • 작동 중에는 움직이는 부분에 손이나 헐렁한 옷을 가까이 두지 마십시오.
  • 사용하기 전에 기계를 안정적이고 평평한 표면에 놓으세요.
  • Do not attempt to bind materials thicker than the specified capacity to prevent damage to the machine.
  • 어린이의 손이 닿지 않는 곳에 보관하세요.

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

  • OFFNOVA Gen2 Comb Binding Machine
  • 100 packs of 3/8" comb binding spines
  • 1 comb protector
  • 1 sheet of oil-absorbing paper
  • 사용자 설명서

4. 설정

  1. 짐 풀기: 제본기와 모든 부속품을 포장에서 조심스럽게 꺼내십시오.
  2. 손잡이 부착: The punch handle is stored underneath the machine for shipping. Locate the thumb bolt on the side of the machine, unscrew it, and attach the handle. Secure the handle by screwing the thumb bolt back into place.
  3. 초기 청소: Before first use, punch the included oil-absorbing paper at least 6 times to remove any excess oil from the machine's internal components. This prevents oil stains on your documents.

Video: Unboxing and initial setup of the OFFNOVA Comb Binding Machine, including attaching the handle and preparing for first use.

5. 사용 설명서

5.1. Punching Paper

  1. 용지 가이드 조정: Use the positioning knob and adjustable edge guide to align your paper (Letter, A4, or A5 sizes).
  2. Adjust Margin: Customize the paper margin depth (3mm, 4mm, or 5mm) using the margin adjustment feature for professional-looking documents.
  3. 용지 삽입: Insert up to 10-12 sheets of 80g paper, 2 sheets of 230g cover/textured paper, or 1 sheet of 5-12mil PVC cover into the paper inlet. Ensure the paper is pushed all the way back against the guide.
  4. 펀치: Press the punch handle all the way down to the bottom in one continuous motion. Do not pause midway, as this may cause paper jams.
OFFNOVA Binding Machine with paper inserted, showing the easy-press handle being pushed down for punching.

Image: Effortless punching with the easy-press handle, demonstrating the stable cast iron base.

Close-up of the adjustable margin feature on the OFFNOVA Binding Machine, showing 3mm, 4mm, and 5mm settings.

이미지: 상세 view of the adjustable margin settings for precise hole punching.

OFFNOVA Binding Machine showing paper size slider for A5, Letter, and A4 holes.

Image: Paper slider for locking paper size, indicating settings for A5 (15 holes), Letter (19 holes), and A4 (21 holes).

5.2. 구속력 있는 문서

  1. Place Comb: Place the comb binding spine onto the comb plate, ensuring the open side of the comb faces upwards.
  2. 오픈 빗: Push the handle back to open the comb rings.
  3. Insert Perforated Pages: Carefully slide the punched pages onto the open comb rings.
  4. 빗살무늬: Pull the handle forward to close the comb rings and secure the bound document.
Three-step diagram showing how to adjust paper size, punch, and place the comb on the OFFNOVA Binding Machine.

Image: Visual guide for adjusting paper, punching, and placing the comb.

Three-step diagram showing how to push the handle to open the comb, place perforated file, and pull handle back to bind papers.

Image: Visual guide for opening the comb, inserting pages, and closing the comb to bind.

Video: Demonstration of the binding machine's operation, showing the process of punching and binding a document.

6. 유지관리

  • 쓰레기통을 비우세요: Regularly pull out the waste tray located at the back of the machine to empty paper scraps. This prevents accumulation and potential jamming.
  • 깨끗한 블레이드: If the machine gets stuck or paper jams, use the included oil-absorbing paper to clean the blades. Punching the oil-absorbing paper helps to remove debris and maintain smooth operation.
  • 저장: 사용하지 않을 때는 기계를 건조하고 깨끗한 환경에 보관하세요.

7. 문제 해결

문제가능한 원인해결책
Paper jam during punchingToo many sheets inserted; handle not pressed continuously.Reduce the number of sheets; press the handle all the way down without pausing.
Uneven holesPaper not properly aligned with the guide.Ensure paper is pushed firmly against the paper guide and margin adjuster before punching.
Oil stains on paperExcess oil on blades from manufacturing.Punch oil-absorbing paper several times before using with important documents.

8. 사양

특징세부 사항
상표오프노바
모델 번호RC12
품목 무게9.59파운드
제품 치수14.57 x 10.24 x 9.25 인치
최대 펀치 용량10-12 sheets of 80g paper; 2 sheets of 230g cover/textured paper; 1 sheet of 5-12mil PVC cover
Max Binding Capacity450 sheets with 2" comb binding spines
조정 가능한 마진3mm, 4mm, 5mm
지원되는 용지 크기편지, A4, A5
홀 카운트21-Hole (A4), 19-Hole (Letter), 15-Hole (A5)

9. 보증 및 지원

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official OFFNOVA web사이트. 보증 청구에 대비해 구매 증빙 자료로 구매 영수증을 보관하세요.

관련 문서 - RC12

사전view Offnova M8 컴퓨터 드라이버 설치 가이드
Windows 및 macOS에 Offnova M8 프린터 드라이버를 설치하는 단계별 지침(예시 포함)amp문신과 문서를 인쇄하기 위한 파일입니다.
사전view OFFNOVA 4B-2054N 라벨 프린터 사용 설명서 - 설정, 작동 및 유지 관리
이 사용 설명서는 OFFNOVA 4B-2054N 라벨 프린터의 설치, 작동 및 유지 관리에 대한 지침을 제공합니다. 개봉, 프린터 구성 요소, 드라이버 설치, LED 상태 표시등, 유지 관리 절차, 전문가 팁, 안전 예방 조치 등을 다룹니다.
사전view OFFNOVA N6140/6240BT 휴대용 발전소 사용 설명서
안전, 작동, 유지관리 및 사양을 다루는 OFFNOVA N6140 및 6240BT 휴대용 발전소에 대한 포괄적인 사용자 매뉴얼입니다.
사전view OFFNOVA 4B-2054N 라벨 프린터 사용 설명서
OFFNOVA 4B-2054N 라벨 프린터 사용 설명서에는 설정, Windows 및 macOS용 드라이버 설치, LED 상태 표시등, 유지 관리 절차, 전문가 팁 및 안전 지침에 대한 자세한 설명이 나와 있습니다.
사전view OFFNOVA N-6140 감열 라벨 프린터 빠른 가이드
이 빠른 가이드는 OFFNOVA N-6140 감열식 라벨 프린터의 설정 및 사용에 필요한 필수 지침을 제공합니다. 프린터 설정, Windows 및 Mac OS 설치, 라벨 구성, LED 표시등, 사양, 유지 관리 및 Bluetooth 연결에 대해 알아보세요.
사전view 오프노바 M8 A4 타투 스텐실 프린터 사용 설명서
오프노바 M8 A4 타투 스텐실 프린터 사용 설명서 (안전 지침, 사양, 제품 개요 포함)view앱 연결, 드라이버 설치, 문서 처리, 문제 해결 및 FCC 규정 준수 등이 포함됩니다.