TURCK NI3-EG08K-AP6X-V1131 Proximity Sensor User Manual

1. 서론

This manual provides essential information for the proper installation, operation, and maintenance of the TURCK NI3-EG08K-AP6X-V1131 Proximity Sensor. This inductive sensor is designed for non-contact detection of metallic objects.

안전하고 효율적인 작동을 위해 제품을 사용하기 전에 이 설명서를 자세히 읽어주세요.

2. 안전 정보

WARNING: Failure to follow these safety instructions may result in personal injury or equipment damage.

• 설치, 배선 또는 유지보수를 하기 전에 반드시 전원을 차단하십시오.
• 자격을 갖춘 사람만 이 장치를 설치하고 유지보수해야 합니다.
• 지정된 볼륨을 초과하지 마십시오tag전자 및 현재 등급.
• Protect the sensor from mechanical impact and excessive vibration.
• Do not modify the sensor. Unauthorized modifications may void the warranty and compromise safety.

3. 제품 오버view

The TURCK NI3-EG08K-AP6X-V1131 is an inductive proximity sensor with the following key features:

• 모델: NI3-EG08K-AP6X-V1131
• 감지 범위: 3mm
• 주택: M8x1 Barrel, 8mm stainless steel full threading short barrel
• 출력 유형: Normally Open (NO) PNP
• 운영 볼륨tage: 10-30VDC
• 연결: M8 Male Connector (Picofast 3-Pin QD Connector)
• 지시자: 1 LED for operational status

This sensor is designed for reliable detection of metallic targets in industrial environments.

4. 설정 및 설치

4.1 장착

1. Select a mounting location where the sensor is protected from physical damage and excessive heat.
2. Mount the M8x1 barrel sensor using appropriate mounting hardware, ensuring it is securely fastened.
3. Maintain adequate clearance around the sensor head to prevent interference from surrounding metallic objects, especially for flush-mountable sensors. Refer to the sensor's datasheet for specific mounting distances.

4.2 배선

The sensor features a 3-pin M8 male connector. Follow the standard wiring color code for PNP sensors:

• 핀 1 (갈색): +VDC (10-30VDC)
• 핀 3 (파란색): 0VDC (Ground)
• 4번 핀(검정색): Output (PNP, Normally Open)

Connect the sensor to the control system according to the wiring diagram provided by the system manufacturer. Ensure all connections are secure and properly insulated.

5. 운영

Once properly installed and wired, apply power to the sensor. The integrated LED indicator will provide status feedback:

• LED 켜짐 : Indicates that a metallic object is within the sensing range and the output is active (PNP output is high).
• LED 꺼짐 : Indicates no metallic object is detected within the sensing range and the output is inactive (PNP output is low).

The sensor operates by generating an electromagnetic field. When a metallic object enters this field, it causes a change in oscillation, triggering the output. The 3mm sensing range ensures reliable detection for small to medium-sized metallic targets.

6. 유지관리

The TURCK NI3-EG08K-AP6X-V1131 sensor is designed for minimal maintenance. However, regular inspection can prolong its lifespan and ensure reliable operation.

• 청소: Periodically clean the sensor face to remove dust, dirt, or debris that may accumulate and affect sensing performance. Use a soft, damp 천. 연마성 세척제나 용매를 사용하지 마십시오.
• 점검: Check wiring and connections for any signs of damage, corrosion, or loose contacts. Ensure the sensor is securely mounted and not subjected to excessive vibration.
• 환경 조건: 작동 환경이 지정된 온도 및 습도 범위 내에 유지되도록 하세요.

7. 문제 해결

8. 사양

9. 보증 및 지원

For specific warranty information, please refer to the documentation provided with your purchase or contact Turck customer support directly. General warranty terms typically cover defects in materials and workmanship for a specified period from the date of purchase.

For technical assistance, troubleshooting beyond this manual, or to inquire about repairs, please contact Turck customer service or your authorized distributor. Have your model number (NI3-EG08K-AP6X-V1131) ready when contacting support.

Turck Official Web대지: www.turck.com