인텔 제온 E-2236 프로세서 사용자 설명서

1. 서론

This manual provides essential information for the proper installation, operation, and maintenance of your Intel Xeon E-2236 Processor. Please read this manual thoroughly before proceeding with installation or use to ensure optimal performance and longevity of the product.

2. 제품 오버view

The Intel Xeon E-2236 is a high-performance processor designed for server and workstation applications. Key features include:

• 프로세서 모델: 인텔 제온 E-2236
• Core Count: 6개의 코어
• 스레드 수: 12개의 스레드
• 기본 주파수: 3.4GHz
• 최대 터보 주파수: 4.8GHz
• 소켓 유형: LGA 1151v2
• 포장: OEM Tray (Heatsink not included)

Figure 2.1: Intel Xeon Inside Logo. This image displays the official Intel Xeon branding logo, indicating the processor's series.

3. 설정 및 설치

Proper installation is critical for the functionality and longevity of your processor. Ensure you have a compatible motherboard with an LGA 1151v2 socket and an appropriate cooling solution (heatsink and fan) before beginning.

3.1 안전 예방 조치

• Always wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage.
• 프로세서를 다룰 때는 가장자리만 잡으십시오. 금색 접점이나 윗면을 만지지 마십시오.
• 설치하기 전에 시스템의 전원이 꺼져 있고 전원 플러그가 뽑혀 있는지 확인하십시오.

3.2 설치 단계

1. 마더보드 준비: Open the CPU socket retention lever and lift the load plate. Remove any protective cover from the socket.
2. 프로세서 정렬: Carefully align the processor with the socket. Match the triangular orientation mark on the processor with the corresponding mark on the socket. Ensure the notches on the processor align with the keys on the socket.


그림 3.1: 상단 view of the Intel Xeon E-2236 Processor. This image shows the integrated heat spreader (IHS) with the Intel logo, and the orientation marks for proper socket alignment.

3. 프로세서를 장착하세요: Gently lower the processor straight down into the socket. Do not force it. If it does not seat easily, re-check alignment.
4. 프로세서 보안: Close the load plate over the processor, then push down the retention lever until it clicks into place.


그림 3.2: 하단 view of the Intel Xeon E-2236 Processor. This image displays the gold contact pads that interface with the motherboard socket. Handle with care to avoid damage.

5. 열 페이스트 적용: Apply a small amount of high-quality thermal paste to the center of the processor's integrated heat spreader (IHS).
6. CPU 쿨러 설치: Mount your compatible CPU cooler (heatsink and fan) according to its manufacturer's instructions. Ensure it makes firm, even contact with the processor's IHS.
7. 팬 연결: Connect the CPU cooler's fan cable to the designated CPU_FAN header on the motherboard.

4. 작동 원리

The Intel Xeon E-2236 processor functions as the central processing unit of your computer system. Once installed and powered on, it executes instructions, performs calculations, and manages the flow of information. Its 6 cores and 12 threads allow for efficient multitasking and demanding computational workloads. The processor dynamically adjusts its frequency up to 4.8 GHz (Max Turbo Frequency) based on workload and thermal conditions to optimize performance.

5. 유지관리

Minimal maintenance is required for the processor itself. However, maintaining the cooling system is crucial for optimal performance and longevity.

• 먼지 제거: Regularly clean dust from the CPU cooler's heatsink fins and fan blades using compressed air. Dust accumulation can impede airflow and lead to overheating.
• 열전도 페이스트: The thermal paste between the CPU and cooler may degrade over several years. If you observe consistently high temperatures, consider reapplying fresh thermal paste. This typically involves removing the cooler, cleaning off old paste, and applying new paste.
• 팬 체크: Ensure the CPU cooler fan is spinning freely and quietly. Replace noisy or failing fans promptly.

6. 문제 해결

If you encounter issues after installing your Intel Xeon E-2236 processor, consider the following common troubleshooting steps:

• 화면이 안 나오거나 시스템이 부팅되지 않습니다:
  • Verify the processor is correctly seated in the socket.
  • Ensure the CPU power cable from the power supply is securely connected to the motherboard.
  • RAM 모듈이 제대로 장착되었는지 확인하세요.
  • Confirm motherboard BIOS/UEFI is updated to support the Xeon E-2236 processor.
• 과열/시스템 종료:
  • CPU 쿨러가 제대로 설치되어 프로세서와 잘 접촉하고 있는지 확인하십시오.
  • 써멀 페이스트 도포 상태를 확인하십시오.
  • CPU 쿨러 팬이 돌아가는지 확인하세요.
  • Clean any dust from the heatsink.
  • 컴퓨터 케이스 내부에 적절한 공기 흐름이 유지되도록 하십시오.
• 시스템 불안정/충돌:
  • Check for proper CPU cooler installation and temperatures.
  • Run diagnostic tools to check memory (RAM) integrity.
  • Ensure all drivers (chipset, etc.) are up to date.

If issues persist, consult your motherboard's manual or Intel's official support resources.

7. 사양

8. 보증 정보

This Intel processor is typically covered by Intel's standard limited warranty. Warranty terms and conditions can vary based on region and point of purchase. For detailed warranty information, please refer to the official Intel web사이트를 방문하거나 판매점에 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

9. 지원

For further assistance, technical support, or to access updated drivers and documentation, please visit the official Intel support web대지:

Intel Processors Support

When contacting support, please have your processor model (Intel Xeon E-2236) and item model number (CM8068404174603) readily available.