1. 서론
This manual provides detailed instructions for the safe and effective use of your Stabila LAR 160 G Green Rotation Self-Leveling Laser Set. This professional-grade tool is designed for precise leveling tasks in both interior and exterior applications, featuring a highly visible green laser beam and robust construction.
기기를 작동하기 전에 이 설명서를 자세히 읽고 향후 참고를 위해 보관해 두십시오.
2. 안전 정보
부상 및 기기 손상을 방지하기 위해 항상 다음 안전 수칙을 준수하십시오.
- 레이저 방사선: This product emits Class 2 laser radiation. Do not stare directly into the laser beam. Avoid direct eye exposure.
- 운영 환경: Use the laser level only in well-ventilated areas. Keep the device away from moisture, dust, and extreme temperatures.
- 배터리 안전: Use only recommended battery types. Ensure correct polarity when inserting batteries. Do not mix old and new batteries or different types of batteries. Dispose of batteries according to local regulations.
- 유지: Do not attempt to modify or repair the device yourself. Refer all servicing to authorized Stabila service personnel.
- 어린이 및 허가받지 않은 인원: Keep the device out of reach of children and unauthorized personnel.
3. 패키지 내용
포장을 풀 때 모든 품목이 들어 있고 손상되지 않았는지 확인하세요.
- Stabila LAR 160 G Green Rotation Laser
- REC 160 R/G Set Receiver
- BST-S Construction Tripod (height-adjustable from 39"–63" / 100–160 cm)
- Hi/Lo Elevation Rod (from 31.5"- 75'' / 80-190 cm)
- Magnetic High-Visibility Plastic Target Plate with Cross-Hair
- 하드 쉘 휴대용 케이스
- 사용자 설명서
4. 제품 특징
The Stabila LAR 160 G offers a range of features for professional leveling applications:
- Fully Automatic, Motor-Driven Rotation Laser: Ensures high leveling accuracy of ± 0.1 mm/m (1/8 inch @ 100 ft).
- Fast Self-Leveling Function: Achieves level within 20 seconds.
- STABILA GREENBEAM Technology: Green laser beams are four times more visible to the human eye than red beams, improving visibility in various conditions.
- Four Laser Functions: Supports horizontal rotation, vertical rotation, plumb-line function, and square (90°) in vertical operation for versatile use.
- IP 65 Protection Class: Dustproof and waterproof, suitable for demanding job site conditions.
- Shock-Absorbent Casing: STABILA soft grip casing provides protection against impacts, with a stable housing cover protecting the laser optics.
- 쉬운 제어: Operated via three control buttons: on/off, tilt mode, and manual mode.
- Accessible Battery Drawer: Allows for easy battery replacement, even when the device is mounted on a tripod.
- 넓은 작업 공간: Up to 600 m (2000 ft) in diameter when used with the REC 160 R/G set receiver.
- 다양한 장착: Two 5/8" x 11 threads integrated in the housing for vertical and horizontal applications.
5. 설정
5.1 배터리 설치
- Locate the battery drawer on the side of the laser unit.
- Open the battery drawer and insert the required D-type batteries, ensuring correct polarity (+/-).
- Close the battery drawer securely.
5.2 Mounting the Laser on the Tripod
- Extend the legs of the BST-S construction tripod to a stable position.
- Place the Stabila LAR 160 G laser unit onto the tripod head, aligning the 5/8" x 11 thread.
- Securely fasten the laser unit to the tripod by turning the tripod's mounting screw.
- Adjust the tripod height as needed for your application.
5.3 Positioning the Laser
Place the tripod with the laser unit on a firm, level surface. Ensure the area is clear of obstructions that could interfere with the laser beam.
6. 사용 설명서
6.1 Power On/Off and Self-Leveling
- 를 누르세요 켜기/끄기 button (marked with a power symbol) to power on the device.
- The laser will automatically begin its self-leveling process. This typically takes about 20 seconds.
- Once leveled, the laser beam will rotate continuously.
- 전원을 끄려면 다음을 누르세요. 켜기/끄기 버튼을 다시 누르세요.
6.2 Laser Functions
The LAR 160 G supports four primary laser functions:
- 수평 회전: For creating a level plane across a large area. This is the default mode after self-leveling.
- 수직 회전: Mount the laser vertically using the side 5/8" thread. The laser will project a vertical plane.
- Plumb-Line Function: In vertical operation, the laser can project a plumb-line (vertical point) for alignment.
- Square (90°) Function: In vertical operation, the laser can project a second beam at 90 degrees to the main vertical plane for squaring applications.
6.3 Tilt Mode
The tilt mode allows for manual slope setting. Press the 경사 button (labeled 'tilt') to activate. In this mode, the laser will maintain its current angle even if the device is slightly disturbed, but it will not self-level. Use this for setting specific grades.
6.4 수동 모드
를 누르세요 수동 button (labeled 'man') to disable self-leveling and manually adjust the laser plane. This is useful for specific non-level applications or when working with a grade rod for slope calculations.
6.5 Using the REC 160 R/G Receiver
For outdoor use or when the laser beam is not visible, use the REC 160 R/G receiver:
- 수신기의 전원을 켭니다.
- Move the receiver into the path of the rotating laser beam.
- The receiver will indicate when it detects the laser beam, typically with visual and audible signals.
- Adjust the receiver's position until the center indicator is active, marking the exact level.
6.6 Using the Hi/Lo Elevation Rod
The elevation rod is used in conjunction with the receiver to measure and transfer heights:
- Attach the REC 160 R/G receiver to the elevation rod.
- 막대를 원하는 높이까지 늘리세요.
- Use the receiver to find the laser plane on the rod, then read the measurement.
7. 유지관리
7.1 청소
부드러운 천으로 장치를 닦으십시오. damp cloth. Do not use harsh cleaning agents or solvents. Ensure the laser optics are clean and free of dust for optimal performance.
7.2 배터리 관리
Remove batteries if the device will not be used for an extended period to prevent leakage. Replace batteries when the low battery indicator appears or performance degrades.
7.3 보관
Store the laser set in its hard shell carrying case in a dry, cool place, away from direct sunlight and extreme temperatures.
7.4 교정
Regularly check the calibration of your laser level. If you suspect inaccuracies, contact an authorized Stabila service center for professional calibration.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Laser does not power on. | 배터리가 방전되었거나 잘못 삽입되었습니다. | Check battery polarity. Replace with fresh D-type batteries. |
| Laser does not self-level or flashes. | 기기가 자체 수평 조절 범위(±5°)를 벗어났습니다. | Reposition the laser on a more level surface. |
| 부정확한 판독값. | Device out of calibration or unstable setup. | Ensure the tripod is stable. If issues persist, contact Stabila service for calibration. |
| Laser beam not visible outdoors. | 주변 조명이 너무 밝습니다. | Use the REC 160 R/G receiver for detection. |
9. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 스타빌라 |
| 모델 | 라르 160G |
| 부품 번호 | 04500TR |
| 레이저 클래스 | 2 |
| 산출 | < 1mW (XNUMX밀리와트 미만) |
| 레이저 파장 | 510 - 530 nm (Green) |
| 셀프 레벨링 범위 | ±5° |
| 레벨링 정확도 | ±0.10 mm/m (1/8 in @ 100 ft) |
| Working Area Diameter (with receiver) | 600m(2000피트) |
| 작동 수명 | 20시간 |
| 배터리 유형 | D |
| 보호 등급 | IP 65 (Dustproof and Waterproof) |
| 삼각대 연결 | 5/8인치 |
| 제품 치수(포장) | 56 x 25 x 10 인치 |
| Item Weight (Laser Unit) | 5.6 온스(약 160그램) |
10. 보증 및 지원
The Stabila LAR 160 G Green Rotation Self-Leveling Laser Set is covered by a 2년 한정 보증 구매일로부터. 이 보증은 정상적인 사용 하에서 재료 및 제조상의 결함을 포함합니다.
For warranty claims, technical support, or service inquiries, please contact Stabila customer service or visit the official Stabila website. Please have your product model number (LAR 160 G) and part number (04500TR) available when contacting support.
자세한 내용은 다음을 방문하세요. www.stabila.com
