1. 제품 오버view
The VIVO STAND-TV70B is a V-Base studio TV display stand designed to support 49-inch to 70-inch flat or curved screen televisions weighing up to 88 lbs. This stand features a sleek design, height adjustment, 360-degree swivel capability, and integrated cable management to maintain an organized appearance. It is compatible with various VESA mounting patterns.
Image 1.1: The VIVO STAND-TV70B Studio TV Display Stand in a modern living room environment, showcasin미니멀한 디자인이에요.
Video 1.1: An official VIVO video highlighting the features of the STAND-TV70B V-Base Studio TV Stand, including its design, VESA compatibility, and cable management.
2. 안전 정보
- 중량 용량: Do not exceed the maximum weight capacity of 88 lbs (40 kg). This stand is designed for televisions between 49 and 70 inches.
- VESA 호환성: Ensure your TV's VESA mounting pattern is compatible with the stand's supported patterns: 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm, or 600x400mm.
- 안정적인 배치: 넘어짐을 방지하기 위해 스탠드는 항상 평평하고 안정적이며 수평인 표면에 놓으십시오.
- 집회: Follow all assembly instructions carefully. Improper assembly can lead to product failure or injury. Two people are recommended for TV installation.
- 케이블 관리 : Utilize the integrated cable management system to prevent tripping hazards and ensure cables are not pinched or damaged.
- 넘어짐 방지 스트랩: An anti-tip strap is included for additional safety. Install it as directed to secure the TV and stand.
3. 부품 목록
Before beginning assembly, ensure all parts are present and undamaged. If any parts are missing or defective, contact VIVO customer support.
- Main Base (V-shaped leg)
- Vertical Pole (Upper and Lower sections)
- VESA Mounting Brackets (Upper and Lower)
- Foot Pads (for base)
- 케이블 관리 커버
- 조립 하드웨어(나사, 와셔, 육각 렌치)
- 넘어짐 방지 스트랩
4. 설정 및 설치
Follow these steps carefully for proper assembly and installation of your VIVO STAND-TV70B.
Video 4.1: Official VIVO assembly video for the STAND-TV70B V-Base Studio TV Stand, demonstrating each step of the installation process.
1단계: 베이스 조립
Slide the two feet sections onto the main V-base and secure them with the provided screws. Screw the foot pads onto the base and feet to protect your floor and prevent slipping.
Image 4.1: The stable V-base feet with rubber pads, designed to prevent sliding and scratching floors. Dimensions are shown as 34.9 inches wide and 25.1 inches deep.
Step 2: Attach the Vertical Pole
Screw the vertical pole sections onto the assembled base. Loosen the set screws on the collar to adjust the pole's height. Once the desired height is achieved, tighten the set screws, ensuring they face towards the back of the stand for a clean look.
Step 3: Prepare VESA Brackets
Remove the screw in the lower VESA bracket. This screw will be used later in Step 5 to secure the TV to the pole.
4단계: TV에 VESA 브래킷 부착
Attach the upper and lower VESA mounting brackets to the back of your television using the appropriate screws and spacers from the hardware kit. Ensure the brackets are securely fastened to your TV's VESA holes.
Image 4.2: Universal VESA compatibility diagram, showing supported patterns from 200x200mm to 600x400mm, and a maximum weight capacity of 88 lbs.
5단계: TV를 스탠드에 장착하세요
With assistance, carefully slide the TV (with attached VESA brackets) onto the vertical pole of the stand. The snap-lock design allows for easy and quick TV assembly. Once positioned, secure the TV by re-inserting and tightening the screw removed in Step 3 into the lower VESA bracket and the pole.
Image 4.3: Visual guide demonstrating the quick and easy installation process, highlighting the snap-lock feature for TV attachment.
6단계: 케이블 관리
Route all necessary cables through the designated cable holes in the vertical pole. Install the cable covers to conceal the wires, ensuring a clean and organized setup.
Image 4.4: Detail of the integrated cable management system, showing how cables are routed and hidden within the stand's pole for a tidy appearance.
5. 사용 설명서
높이 조정
The TV stand allows for height adjustment along the vertical pole. To adjust the height, loosen the set screws on the collar, carefully raise or lower the TV to the desired position, and then firmly tighten the set screws to secure it.
Image 5.1: The TV stand from a side perspective, demonstrating its height adjustment capability to achieve an ergonomic view잉 수준.
스위블 기능
The stand features a fluid 360-degree swivel. Gently rotate the television to achieve the optimal viewing angle for your audience. No locking mechanism is required for the swivel function.
6. 유지관리
- 청소: 스탠드를 부드러운 천으로 닦으세요.amp 천으로 닦으세요. 마감재를 손상시킬 수 있는 강한 화학 물질이나 연마성 세제는 사용하지 마세요.
- 하드웨어 검사: 모든 나사와 연결부가 단단히 조여져 있는지 주기적으로 점검하십시오. 필요한 경우 다시 조이십시오.
- 케이블 검사: Regularly inspect cables for any signs of wear, fraying, or pinching. Replace damaged cables immediately.
7. 문제 해결
- 스탠드가 불안정합니다. Ensure the stand is placed on a level surface. Check that all screws in the base and pole connections are fully tightened. Verify the TV weight does not exceed the maximum capacity.
- TV Not Mounting Correctly: Confirm your TV's VESA pattern matches the supported range. Ensure the VESA brackets are correctly aligned and attached to the TV.
- 높이 조절의 어려움: Loosen the set screws on the pole collar sufficiently before attempting to adjust the height. Ensure no cables are obstructing the pole's movement.
8. 사양
| 특징 | 사양 |
|---|---|
| 모델 번호 | 스탠드-TV70B |
| 상표 | 비보 |
| 호환 가능한 TV 크기 | 49 ~ 70 인치 |
| 중량 용량 | 최대 88kg(40파운드) |
| VESA 호환성 | 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm, 600x400mm |
| 이동 유형 | Height Adjusting, Swivel (360°) |
| 장착 유형 | 플로어 마운트 |
| 재료 | 알루미늄, 스틸, 플라스틱 |
| 색상 | 검은색 |
| 품목 무게 | 19.45파운드 |
| 패키지 크기 | 42.52 x 11.34 x 7.4 인치 |
9. 보증 및 지원
This VIVO product is backed by a 3년 제조업체 보증. For any questions, concerns, or assistance with your product, please contact VIVO customer support. Our U.S.-based sales and technical support team is available to provide high-quality assistance.
