1. 서론
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Güde Airpower 275/8/50 Silent Compressor. Please read these instructions carefully before initial use and keep them for future reference. This compressor is designed for generating compressed air for various applications, including tire inflation and powering pneumatic tools.
The Güde Airpower 275/8/50 is an oil-free, twin-piston compressor with a 50-liter tank, operating at 230V. Its silent design ensures a low noise level during operation.
2. 안전 정보
Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Failure to follow these instructions may result in serious injury or damage to the equipment.
- 전기 안전: Ensure the compressor is connected to a properly grounded 230V power supply. Do not operate in wet conditions or with damaged cables.
- 압력 안전: Never exceed the maximum operating pressure of the compressor or the connected tools. Always wear appropriate eye protection.
- 통풍: 과열을 방지하려면 환기가 잘 되는 곳에서 압축기를 작동하세요.
- 유지: Disconnect the power supply before performing any maintenance or repairs.
- 어린이와 구경꾼: Keep children and unauthorized persons away from the operating compressor.
3. 설치 및 조립
Before operating the compressor, ensure all components are correctly assembled and inspected.
3.1 풀기 및 검사
Carefully remove the compressor from its packaging. Inspect for any signs of damage during transit. Report any damage to your supplier immediately.
3.2 바퀴와 손잡이 부착하기
The compressor is equipped with wheels and a handle for portability. Attach the large wheels to the rear axle and the smaller swivel casters to the front support bracket. Secure the handle firmly to the main unit.
Figure 1: The Güde Airpower 275/8/50 Silent Compressor, showing the overall assembly with wheels and handle.
그림 2: 후면 view of the compressor, highlighting the sturdy handle and control panel with pressure gauges.
그림 3: 클로즈업 view of the robust wheels, designed for easy movement of the compressor.
3.3 전기 연결
Connect the compressor to a standard 230V, 50Hz electrical outlet. Ensure the circuit can handle the compressor's 1500W power consumption.
4. 사용 설명서
Follow these steps for safe and effective operation of your compressor.
4.1 압축기 시동
- Ensure the main power switch is in the 'OFF' position.
- 전원 코드를 적합한 콘센트에 꽂으세요.
- Turn the main power switch to the 'ON' position. The compressor will start to build pressure in the tank.
- The compressor will automatically shut off once the maximum pressure is reached and restart when the pressure drops below a set threshold.
4.2 출력 압력 조정
Use the pressure regulator knob located near the output quick-connect fitting to adjust the desired working pressure. The output pressure gauge will display the regulated pressure.
Figure 4: Detail of the twin-piston pump heads and air lines, showing the robust construction and connections.
4.3 에어 공구 연결하기
Connect your pneumatic tools or accessories to the quick-connect fitting on the compressor. Ensure the connection is secure before operating the tool.
Figure 5: A user demonstrating tire inflation using the Güde Airpower compressor, highlighting its practical application.
4.4 종료
When finished, turn the main power switch to the 'OFF' position. Disconnect the power cord from the outlet. Release any remaining pressure from the tank by opening the drain valve or using an air tool until the pressure gauge reads zero.
5. 유지관리
정기적인 유지관리는 압축기의 수명과 최적의 성능을 보장합니다.
5.1 응축수 배수
Condensation will accumulate in the air tank. It is crucial to drain this moisture daily or after each use to prevent corrosion and maintain air quality. Locate the drain valve at the bottom of the tank, open it to release water, and then close it securely.
Figure 6: Close-up of the drain valve located at the bottom of the compressor tank, used for releasing condensed moisture.
5.2 청소
Keep the compressor clean and free from dust and debris. Use a dry cloth to wipe down the exterior. Do not use solvents or abrasive cleaners.
5.3 오일 프리 설계
This compressor features an oil-free design, eliminating the need for oil changes or oil level checks. This simplifies maintenance and provides cleaner air output.
6. 문제 해결
일반적인 문제와 해결 방법은 아래 표를 참조하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 압축기가 시작되지 않음 | 전원 공급이 없습니다 열 과부하 활성화 | 전원 연결 및 콘센트를 확인하세요 Allow compressor to cool down, then reset thermal overload switch (if present) |
| 낮은 출력 압력 | 압력 조절기가 너무 낮게 설정되었습니다. Air leaks in connections | 압력 조절기 조정 Check all hose connections and fittings for leaks |
| 압축기가 지속적으로 실행 | Air leaks in tank or connections 압력 스위치 오작동 | Inspect tank and connections for leaks 도움이 필요하면 고객지원팀에 문의하세요. |
| 과도한 소음 또는 진동 | 느슨한 구성 요소 제품이 안정적인 표면에 놓여 있지 않습니다. | 모든 패스너를 확인하고 조이세요 Place compressor on a firm, level surface |
7. 사양
Key technical data for the Güde Airpower 275/8/50 Silent Compressor:
| 특징 | 값 |
|---|---|
| 모델 번호 | 50138 |
| 권tage | 230 볼트 |
| 힘 | 1500 Watts (1.5 Kilowatt) |
| 기류 용량 | 분당 275리터 |
| 탱크 용량 | 50리터 |
| 소음 수준(LPA) | 61데시벨 |
| 치수(길이 x 너비 x 높이) | 72 x 41.5 x 62.5cm |
| 무게 | 42.6 킬로그램 |
| 특징 | Oil-free, Silent Operation |
Figure 7: Dimensional diagram of the compressor, indicating length, width, and height measurements.
Figure 8: A visual comparison of the compressor's 61 dB(A) noise level against other common sounds, illustrating its quiet operation.
8. 보증
This Güde compressor is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for any warranty claims. For detailed warranty information, refer to the documentation provided with your purchase or contact Güde customer support.
9. 지원
For technical assistance, spare parts, or further inquiries regarding your Güde Airpower 275/8/50 Silent Compressor, please contact your authorized Güde dealer or visit the official Güde web고객 서비스 연락처 정보는 사이트에서 확인하세요.
