1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of your Zebronics H61 Motherboard (Model Zeb-H61). This motherboard is designed to support Intel i7/i5/i3/Pentium/Celeron processors with an LGA 1155 socket and DDR3 memory. Please read this manual thoroughly before proceeding with installation to ensure proper setup and functionality.

그림 1.1: 위에view of the Zebronics H61 Motherboard. This image displays the full layout of the motherboard, including the CPU socket, RAM slots, PCIe slots, and various connectors.
2. 주요 특징
- 프로세서 지원: Compatible with Intel i7/i5/i3/Pentium/Celeron processors in LGA 1155 socket.
- 칩셋: Intel H61 Chipset.
- 메모리: Two DDR3 dual-channel slots supporting DDR3 1066/1333/1600MHz memory, up to 16GB.
- LAN : Realtek 8105E/8111E 100/1000 Mbps Ethernet.
- 오디오: Realtek 662 3xAudio Jacks for 6-channel High Definition Audio.
- 확장 슬롯: 1 x PCI Express x16 slot, 1 x PCI Express x1 slot.
- 저장: 4 x SATA 3Gb/s (SATAII) ports.
- 후면 I/O 포트: 1 x PS/2 mouse/keyboard port, 1 x VGA port, 1 x HDMI port, 4 x USB 2.0 ports, 1 x LAN port, 3 x audio jacks.
- 온보드 커넥터: Front panel connector, speaker connector, front panel audio connector, 4 x USB 2.0 ports, 4 x SATA 3Gb/s ports, 4-pin CPU fan connector, SYS fan connector, 24-pin ATX power connector, 4-pin ATX 12V power connector, 3-pin clear CMOS header.

그림 2.1: Key features of the H61 Motherboard. This image highlights the H61 chipset, DDR3 memory support, LGA 1155 socket, 5.1 audio, 10/100 LAN, 4 SATA II ports, and PCIe expansion.
3. 설정 및 설치
Before beginning installation, ensure your computer is powered off and unplugged from the wall outlet. Wear an anti-static wrist strap or frequently touch a grounded metal object to prevent electrostatic discharge (ESD) damage to components.
3.1. CPU 설치
- 마더보드에서 LGA 1155 소켓을 찾으세요.
- 로드 레버를 살짝 아래로 누른 다음 옆으로 당겨 CPU 소켓 고정 프레임을 엽니다.
- Carefully align the notches on your Intel LGA 1155 processor with the corresponding keys on the socket. Ensure the gold triangle on the CPU aligns with the triangle on the socket.
- CPU를 소켓에 조심스럽게 끼워 넣으십시오. 억지로 끼우지 마십시오.
- 고정 프레임을 닫고 하중 레버를 잠금 위치로 다시 밀어 넣으십시오.
- CPU 상단에 써멀 페이스트를 얇고 고르게 바르십시오.
- Install the CPU cooler according to its manufacturer's instructions, ensuring it is securely fastened.
3.2. Installing RAM (Memory Modules)
- 메인보드에서 DDR3 DIMM 슬롯 두 개를 찾으세요.
- DIMM 슬롯의 양쪽 끝에 있는 클립을 엽니다.
- DDR3 메모리 모듈의 노치를 DIMM 슬롯의 키에 맞춥니다.
- 메모리 모듈을 클립이 제자리에 고정될 때까지 슬롯에 단단히 삽입하십시오. 두 클립이 모두 닫혔는지 확인하십시오.
- 듀얼 채널 작동을 위해서는 사용 가능한 두 슬롯 모두에 메모리 모듈을 설치하십시오.
3.3. 전원 공급 장치 연결
- Connect the 24-pin ATX main power connector from your power supply to the corresponding slot on the motherboard.
- Connect the 4-pin ATX 12V power connector (CPU power) from your power supply to the designated slot near the CPU socket.
3.4. 저장 장치 연결 (SATA)
- Locate the 4 SATA 3Gb/s (SATAII) ports on the motherboard.
- Connect one end of a SATA data cable to a SATA port on the motherboard and the other end to your hard drive or SSD.
- 전원 공급 장치의 SATA 전원 케이블을 저장 장치에 연결하십시오.
3.5. 확장 카드 설치
- Identify the PCI Express x16 slot for a graphics card or the PCI Express x1 slot for other expansion cards.
- PC 케이스에서 해당 확장 슬롯 덮개를 제거하세요.
- Align the card with the slot and press down firmly until it is seated correctly. Secure the card with a screw to the PC case.
3.6. Connecting Front Panel and Rear I/O
Connect the front panel connectors (power switch, reset switch, HDD LED, power LED, front panel audio, USB ports) to their respective headers on the motherboard. Refer to the motherboard diagram for exact pin assignments.

그림 3.1: Rear I/O Panel of the Zebronics H61 Motherboard. This image shows the ports available at the back of the motherboard, including PS/2, VGA, HDMI, USB 2.0, LAN, and audio jacks.
- PS/2 포트: 구형 키보드 또는 마우스용입니다.
- VGA 포트: For connecting to a monitor using a VGA cable.
- HDMI 포트 : For connecting to a monitor or display using an HDMI cable.
- USB 2.0 포트: USB 장치를 연결하는 데 사용됩니다.
- LAN 포트: For connecting to a network via an Ethernet cable.
- 오디오 잭: For connecting speakers, headphones, or microphones.
4. 사용 설명서
4.1. 첫 번째 부팅
- After all components are installed and connected, close your PC case.
- Connect your monitor, keyboard, mouse, and power cable.
- Turn on the power supply switch (if applicable) and then press the power button on your PC case.
- The system should boot up. If it does not, refer to the Troubleshooting section.
4.2. 바이오스 설정
The BIOS (Basic Input/Output System) is firmware that initializes hardware during the booting process. To enter BIOS setup:
- During the initial boot sequence, repeatedly press the 델 or F2 key (the exact key may vary, check on-screen prompts).
- Within the BIOS, you can configure various system settings such as boot order, date/time, CPU/memory settings, and enable/disable integrated peripherals.
- BIOS를 종료하기 전에 변경 사항을 저장하십시오.
4.3. 드라이버 설치
After installing your operating system, install the necessary drivers for the motherboard's components (chipset, LAN, audio, etc.). These drivers are typically provided on a CD/DVD included with the motherboard or can be downloaded from the Zebronics official web대지.
5. 유지관리
- 먼지 제거: 압축 공기를 사용하여 마더보드와 부품의 먼지를 정기적으로 청소하십시오. 청소하기 전에 시스템 전원이 꺼져 있고 플러그가 뽑혀 있는지 확인하십시오.
- BIOS 업데이트: Periodically check the Zebronics webBIOS 업데이트 사이트입니다. BIOS 업데이트는 시스템 안정성, 호환성 및 성능을 향상시킬 수 있습니다. 마더보드 손상을 방지하기 위해 업데이트 지침을 주의 깊게 따르십시오.
- 케이블 관리 : 모든 케이블이 깔끔하게 정리되어 PC 케이스 내부의 공기 흐름을 방해하지 않도록 하십시오.
6. 문제 해결
문제가 발생하면 다음의 일반적인 문제 해결 단계를 참조하세요.
- 전원 없음:
- Check if the power supply is connected correctly to the motherboard (24-pin and 4-pin connectors).
- 전원 공급 스위치가 'ON' 위치에 있는지 확인하세요.
- Verify that the front panel power switch connector is correctly attached to the motherboard header.
- 디스플레이 없음:
- Ensure the monitor is connected to the correct video output (VGA or HDMI on the motherboard, or a dedicated graphics card).
- Check if the RAM modules are properly seated in their slots. Try reseating them.
- If using a dedicated graphics card, ensure it is fully seated in the PCIe slot and has auxiliary power connected (if required).
- 램 스틱 하나만 꽂고 부팅해 보세요.
- 시스템 불안정/충돌:
- CPU와 GPU 온도를 확인하세요. 과열은 시스템 불안정을 초래할 수 있습니다.
- 모든 드라이버가 설치되어 있고 최신 버전인지 확인하십시오.
- 메모리 진단 도구를 실행하여 오류가 있는 RAM을 확인하세요.
- 모든 구성 요소에 필요한 전원이 충분한지 확인하십시오.
- 주변 장치가 감지되지 않음:
- Ensure the device is properly connected to the correct port (USB, SATA, etc.).
- 운영 체제의 장치 관리자에서 드라이버 문제를 확인하십시오.
- Test the peripheral on another system if possible.
7. 사양

그림 7.1: Detailed specifications as provided on the product packaging. This image lists CPU support, chipset, memory, BIOS, I/O interface, onboard interface, integrated sound, integrated LAN, expansion slots, and form factor.
| 특징 | 설명 |
|---|---|
| 상표 | 제 브로 닉스 |
| 모델 | Zeb-H61 |
| CPU 소켓 | LGA 1155 |
| Supported CPU | Intel i7/i5/i3/Pentium/Celeron processors |
| 칩셋 | 인텔 H61 익스프레스 |
| 메모리 슬롯 | 2개의 DDR3 DIMM 슬롯 |
| 메모리 유형 | DDR3 1066/1333/1600MHz (듀얼 채널) |
| 최대 메모리 용량 | 16GB (XNUMX기가바이트) |
| 랜 | Realtek 8105E/8111E 100/1000 Mbps |
| 오디오 | Realtek 662 3xAudio Jacks (6-channel HD Audio) |
| SATA 포트 | 4 x SATA 3Gb/s (SATAII) |
| PCIe x16 슬롯 | 1 |
| PCIe x1 슬롯 | 1 |
| 후면 USB 포트 | 4개의 USB 2.0 |
| Rear Video Outputs | VGA 1개, HDMI 1개 |
| Rear Other Ports | 1 x PS/2 (mouse/keyboard), 1 x LAN, 3 x Audio Jacks |
| 폼 팩터 | 마이크로 ATX |
| 치수(길이x너비x높이) | 22 x 6 x 27cm |
| 품목 무게 | 550g |
8. 보증 및 지원
For warranty information and technical support, please refer to the documentation included with your product or visit the official Zebronics web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
Zebronics Official Web대지: www.zebronics.com
For further assistance, you may contact Zebronics customer support through their web웹사이트 또는 제품 포장에 제공된 연락처 정보를 참조하십시오.





