Vaddio EasyIP 10 PoE PTZ Camera User Manual

1. 서론

The Vaddio EasyIP 10 Camera is a key component of the EasyIP Ecosystem, designed for high-quality videoconferencing in various room sizes. This camera delivers 1080p/60 resolution video feeds and integrates seamlessly into an AV-over-IP solution. It connects to a 1 GB PoE+ switch, simplifying installation by eliminating the need for separate power supplies and costly USB extensions. This manual provides essential information for the proper setup, operation, and maintenance of your EasyIP 10 Camera.

2. 제품 오버view

The EasyIP 10 Camera is a Power over Ethernet (PoE+) enabled Pan-Tilt-Zoom (PTZ) camera. It is optimized for use within the Vaddio EasyIP Ecosystem, providing high-definition video capture for unified communications (UC) soft clients.

그림 1: Vaddio EasyIP 10 PoE PTZ Camera. This image shows the white dome-shaped camera with its lens visible, mounted on a bracket, and the Vaddio logo on its base.

주요 특징:

• HD PTZ camera with 10x optical zoom.
• 67도 수평 필드 view.
• Controlled via an intuitive browser-based user interface from the EasyIP Decoder.
• One EasyIP (Network PoE+) video output.
• Supports up to two EasyIP Decoders simultaneously.
• PoE+ powered, requiring a single Ethernet cable for power and data.

3. 설정 및 설치

3.1 Package Contents (Typical):

• Vaddio EasyIP 10 Camera
• Mounting bracket (for wall or ceiling installation)
• 설치 하드웨어
• Quick Start Guide (refer to Vaddio's official website for full documentation)

3.2 카메라 장착:

1. 위치 선택: Choose a suitable indoor location for the camera, considering the desired field of view and proximity to a network switch. The camera supports wall mount installation.
2. 안전한 브라켓: Attach the provided mounting bracket securely to the chosen surface using appropriate hardware. Ensure the bracket is level and can support the camera's weight.
3. 카메라 부착: Carefully attach the EasyIP 10 Camera to the mounted bracket. Follow the specific instructions provided with the mounting hardware to ensure a stable connection.

3.3 Connecting the Camera:

1. 네트워크 연결 : Connect a standard Ethernet cable from the camera's network port to a 1 GB PoE+ (Power over Ethernet Plus) switch. The PoE+ connection provides both power and data to the camera.
2. 스위치 호환성: The camera is optimized to work with the Luxul AMS-1208P Managed PoE Switch but is compatible with other properly configured 1 GB PoE switches. Ensure your switch meets the PoE+ (802.3at) standard for adequate power delivery.
3. 시스템 통합: Integrate the camera into your EasyIP Ecosystem by connecting the PoE+ switch to the EasyIP Decoder.

4. 카메라 작동

4.1 전원 켜기:

Once connected to a PoE+ switch, the camera will power on automatically. Allow a few moments for the camera to initialize and connect to the network.

4.2 Accessing Controls:

The EasyIP 10 Camera is controlled via an intuitive browser-based user interface accessible through the EasyIP Decoder. Refer to your EasyIP Decoder manual for detailed instructions on accessing and navigating this interface.

4.3 Pan-Tilt-Zoom (PTZ) Functions:

From the browser interface, you can control the camera's pan, tilt, and zoom functions to adjust the field of view. The camera features 10x optical zoom for detailed imaging.

4.4 Video Output:

The camera sends 1080p/60 resolution video feeds to the EasyIP Ecosystem. These feeds are then delivered to UC soft clients through the EasyIP Decoder. The camera supports simultaneous output to up to two EasyIP Decoders.

5. 유지관리

Regular maintenance ensures optimal performance and longevity of your EasyIP 10 Camera.

• 청소: Gently wipe the camera's exterior and lens with a soft, dry, lint-free cloth. Avoid abrasive cleaners or solvents.
• 펌웨어 업데이트: Periodically check the Vaddio website for firmware updates. Keeping the firmware current ensures access to the latest features and performance improvements. Follow the instructions provided by Vaddio for any update procedures.
• 환경 조건: Ensure the camera operates within its specified environmental conditions (temperature, humidity) to prevent damage. The camera is designed for indoor use.

6. 문제 해결

This section addresses common issues you might encounter with your EasyIP 10 Camera.

6.1 No Power/No Video:

• PoE+ 연결 확인: Ensure the Ethernet cable is securely connected to both the camera and a PoE+ enabled switch.
• Verify Switch: Confirm that the network switch is powered on and that the port connected to the camera is providing PoE+ power (802.3at).
• 네트워크 구성: Verify that the network is properly configured and that the camera can obtain an IP address.

6.2 Camera Not Responding to Controls:

• 네트워크 연결성: Ensure the camera has a stable network connection to the EasyIP Decoder.
• Decoder Status: Check the status of your EasyIP Decoder to ensure it is functioning correctly.
• 브라우저 인터페이스: Refresh the browser interface or try accessing it from a different device to rule out browser-specific issues.

6.3 Poor Video Quality:

• 렌즈 청결도: 유지 관리 섹션에 설명된 대로 카메라 렌즈를 청소하십시오.
• 조명 조건: Ensure adequate lighting in the camera's field of view.
• 네트워크 대역폭: Verify that your network has sufficient bandwidth to support 1080p/60 video streaming.

For persistent issues, consult the full Vaddio EasyIP Ecosystem documentation or contact Vaddio technical support.

7. 사양

8. 보증 및 지원

For detailed warranty information and technical support, please refer to the official Vaddio website or contact your authorized Vaddio dealer. Keep your purchase receipt for warranty claims.

Vaddio Official Web대지: www.vaddio.com