1. 서론
This instruction manual provides detailed guidance for the safe and proper installation, operation, and maintenance of your MOUNTUP Full Motion Tilting TV Wall Mount, model MU0014. Please read this manual thoroughly before beginning installation to ensure correct assembly and to prevent potential damage or injury. Keep this manual for future reference.
2. 안전 정보
경고: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of your warranty. Always ensure the mounting surface can safely support the combined weight of the mount and the television.
- Do not install this product on drywall alone. It must be mounted to a single wood stud, solid concrete, or brick wall.
- Ensure all screws are tightened securely, but do not overtighten. Overtightening can damage the screws and reduce holding capacity.
- Verify VESA compatibility and TV weight before installation. This mount supports TVs from 26-55 inches and up to 88 lbs (40 kg).
- Use a stud finder to accurately locate the center of wood studs.
- 설치 시에는 항상 눈 보호구를 포함한 적절한 안전 장비를 사용하십시오.
- 설치 과정 중 확실하지 않은 부분이 있으면 자격을 갖춘 전문가에게 문의하십시오.
3. 패키지 내용
Please check to ensure all components are present and undamaged before installation. If any parts are missing or defective, contact customer service.
- 벽판 조립체
- TV 브래킷 암 (2개)
- 장착 하드웨어 키트(다양한 나사, 와셔, 스페이서, 앵커)
- 버블 레벨
- 케이블 타이
- 사용 설명서
이미지 3.1: 이상view of the MOUNTUP TV Wall Mount MU0014 and included accessories.
4. 사양
| 특징 | 사양 |
|---|---|
| 모델 번호 | 무크 녹스 |
| 호환 가능한 TV 크기 | 26-55 인치 |
| 최대 하중 용량 | 88파운드(40kg) |
| VESA 호환성 | 100x100mm ~ 400x400mm |
| 장착 유형 | Wall Mount (Single Stud, Brick, Concrete) |
| 이동 유형 | 완전 동작 (회전, 기울기, 확장) |
| 기울기 각도 | +5° / -15° |
| 회전 각도 | +/-90° (max angle depends on TV size) |
| 설치 후 레벨링 | +/-3° |
| Wall Distance (Extension) | 2.5인치(수축 시)에서 18.9인치(확장 시)까지 |
| 재료 | 합금강 |
| 색상 | 검은색 |
| 제품 치수 | 11.02 x 9.25 x 2.76인치(접힌 상태) |
| 품목 무게 | 6.55파운드 |
Image 4.1: Compatibility chart showing VESA patterns, TV size, and supported wall types.
5. 설정 및 설치
The MOUNTUP MU0014 TV wall mount is designed for easy installation. Follow these steps carefully.
5.1 설치 전 체크리스트
- Check TV Weight and VESA Pattern: Ensure your TV weighs less than 88 lbs (40 kg) and has a VESA pattern between 100x100mm and 400x400mm.
- 벽 유형을 확인하세요: This mount is suitable for single wood studs, solid concrete, or brick walls. 건식벽체에만 설치하지 마십시오.
- 도구 모으기: You will need a stud finder, drill, level, Phillips head screwdriver, and a socket wrench (for lag bolts).
5.2 단계별 설치
- TV 브래킷을 TV에 부착하세요:
- TV를 부드럽고 깨끗한 표면에 화면이 아래로 향하도록 조심스럽게 놓으십시오.
- Identify the correct screws, washers, and spacers from the hardware kit that fit your TV's VESA mounting holes.
- Attach the two vertical TV bracket arms to the back of your TV using the selected hardware. Ensure the arms are centered and securely fastened.
Image 5.1: TV bracket arms secured to the back of a television.
- 벽면 장착판을 벽에 고정하세요:
- 목재 스터드 설치용: Use a stud finder to locate the center of a single wood stud. Mark the desired height for the top mounting hole. Use the provided template or the wall plate itself to mark the remaining drill holes. Pre-drill pilot holes (recommended size: 5/32" or 4mm) into the center of the stud. Secure the wall plate using the lag bolts and washers.
- 콘크리트/벽돌 벽 설치용: Mark the desired drill holes. Pre-drill pilot holes (recommended size: 3/8" or 10mm) to a depth of 2.36 inches (60mm). Insert concrete anchors into the pilot holes. Secure the wall plate using the lag bolts and washers.
- Use the included bubble level to ensure the wall plate is perfectly horizontal before fully tightening all lag bolts.
Image 5.2: Visual representation of the 3-step installation: Attach bracket, Mount wall plate, Hang TV.
Image 5.3: The wall plate assembly securely mounted to the wall.
- TV를 벽면 고정판에 걸어주세요:
- 다른 사람의 도움을 받아 부착된 브래킷을 이용해 TV를 조심스럽게 들어 올려 벽면 고정판에 걸어주세요.
- TV가 벽걸이 받침대에 제대로 고정되었는지 확인하십시오.
- Tighten the safety screws located on the bottom of the TV brackets to prevent accidental dislodging.
5.3 설치 후 수평 조정
After hanging the TV, you can make fine adjustments to ensure it is perfectly level.
- 이 거치대는 설치 후 +/-3°의 수평 조절이 가능합니다.
- Loosen the leveling bolts slightly, adjust the TV to the desired level, and then re-tighten the bolts.
Image 5.4: Illustration of the +/-3 degree post-installation leveling feature.
6. 작동 지침 (조정)
The MOUNTUP MU0014 offers full motion capabilities for optimal view각도를 나타냅니다.
6.1 기울기 조정
- TV 거치대는 +5°(위쪽)에서 -15°(아래쪽)까지 기울기 조절이 가능합니다.
- To adjust the tilt, loosen the tilt adjustment knobs or bolts on the TV bracket arms, set the TV to the desired angle, and then securely tighten the knobs/bolts. This helps reduce glare.
Image 6.1: The TV mount allows for a tilt range of +5 degrees to -15 degrees to reduce glare.
6.2 회전 조절
- The articulating arms allow the TV to swivel up to +/-90° left or right.
- Gently push or pull the TV to achieve the desired swivel angle. The maximum swivel angle may vary depending on the size of your television.
Image 6.2: The mount provides viewing flexibility with tilt and swivel adjustments.
Image 6.3: The mount allows for +/-90 degree swivel for perfect view주고받음.
6.3 확장 및 수축
- The mount can extend your TV from 2.5 inches (retracted) to 18.9 inches (extended) from the wall.
- Gently pull the TV away from the wall or push it back to adjust the distance. This feature also provides easy access to cables behind the TV.
Image 6.4: The mount retracts to 2.5 inches and extends up to 18.9 inches from the wall.
Image 6.5: The adjustable wall distance (2.5"-18.9") allows for easy cable access.
7. 유지관리
정기적인 유지 관리는 TV 벽걸이 거치대의 수명과 안전한 작동을 보장하는 데 도움이 됩니다.
- 정기 검사: Every few months, check all mounting screws and bolts to ensure they remain tight. Re-tighten if necessary.
- 청소: 부드럽고 마른 천으로 거치대를 닦으십시오. 연마성 세척제나 용제는 마감재를 손상시킬 수 있으므로 사용하지 마십시오.
- 움직임 확인: Periodically move the TV through its full range of motion (tilt, swivel, extend) to ensure smooth operation. If movement becomes stiff, check for any obstructions or loose components.
8. 문제 해결
설치 중 또는 설치 후 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 설치 후 TV가 수평이 아닙니다. | Post-installation leveling not adjusted or not tightened. | Utilize the +/-3° post-installation leveling feature. Loosen the leveling bolts, adjust the TV, and re-tighten. |
| 마운트가 불안정하거나 흔들리는 느낌이 듭니다. | Wall plate not securely fastened to the wall stud/concrete, or TV brackets not secured to TV. | Ensure all lag bolts securing the wall plate are fully tightened. Verify TV bracket screws are tight. Re-check wall type compatibility. |
| Difficulty moving the TV (tilt/swivel/extend). | Adjustment bolts are too tight, or mechanism needs lubrication. | For tilt, loosen the tilt adjustment knobs/bolts slightly. For swivel/extension, ensure no cables are snagged. If still stiff, contact customer support. |
| Missing hardware components. | 포장 오류. | Contact MOUNTUP customer service immediately for replacement parts. |
| TV가 거치대에 맞지 않습니다. | Incorrect VESA pattern or TV weight/size. | Verify your TV's VESA pattern and weight against the mount's specifications (100x100mm to 400x400mm, max 88 lbs). |
9. 보증 정보
MOUNTUP products are designed for quality and durability. For specific warranty terms and conditions applicable to your MU0014 TV Wall Mount, please refer to the product packaging or contact MOUNTUP customer support directly. Keep your proof of purchase for warranty claims.
10. 고객 지원
Should you have any questions before or after your purchase, or require assistance with installation, our customer support team is available to help.
Please visit the official MOUNTUP website or refer to the contact information provided on your product packaging for the most current support options.
메모: Be sure to verify VESA compatibility, TV weight, and possible blocked input ports before purchasing or installing any TV wall mount.
