Kidde Smoke Detector User Manual

소개

The Kidde Model i12060A is a hardwired ionization smoke alarm designed for residential use. It operates on a 120V AC power source and includes a 9V battery backup to ensure continuous operation during power outages. This alarm utilizes ionization sensing technology to detect invisible fire particles, commonly associated with fast-flaming fires. For comprehensive fire safety, Kidde recommends installing both ionization and photoelectric smoke alarms.

주요 특징

• Ionization Sensing Technology: Detects invisible fire particles from fast-flaming fires.
• 85 Decibel Alarm: Provides a loud alert in the event of smoke detection.
• 배터리 백업 : Equipped with a 9V battery (included) for operation during power failures.
• Front-Load Battery Door: Allows for easy battery replacement without removing the alarm from its mounting bracket.
• 테스트-소음 제거 버튼: Simplifies testing the alarm and silencing nuisance alarms.
• 상호 연결 가능: Can be interconnected with up to 24 compatible Kidde devices (including smoke, CO, and heat alarms) for whole-home protection.
• LED 표시등: Red LED indicates alarm modes (Standby, Alarm, Alarm Memory, Hush); Green LED indicates AC power.
• UL 인증: Meets safety standards of UL217, NFPA72, NFPA 101, CA Fire Marshal, FHA, & HUD.

Figure 1: Diagram illustrating key features of the Kidde Smoke Detector, including front-loading battery door, 9V battery backup, ionization sensor, easy installation, interconnectability, and test/hush button.

설정 및 설치

The Kidde i12060A smoke alarm is designed for easy installation. It requires a 120V AC power source. The unit comes with a pre-stripped wiring harness and an easy-off cap for simplified wiring. Ensure power is off at the circuit breaker before beginning installation.

1. 장착 브래킷 설치: Secure the mounting bracket to the ceiling or wall using the provided screws. The bracket typically requires two screws.
2. 배선 연결: Connect the alarm's wiring harness to your household electrical wiring. Follow local electrical codes and the wiring diagram provided in the full user manual. The unit features push-pin connectors for easy attachment.
3. 배터리 삽입: Insert the included 9V battery into the front-load battery compartment. Ensure correct polarity.
4. Attach Alarm to Bracket: Align the smoke alarm with the mounting bracket and twist clockwise until it locks securely into place.
5. 전원 켜기 및 테스트: Restore power at the circuit breaker. The green LED should illuminate, indicating AC power. Press and hold the Test/Hush button to confirm the alarm sounds.

그림 2: 후면 view of the Kidde Smoke Detector, showing the mounting points and wiring connection area. Note the "DATE OF INSTALL" label for tracking.

Figure 3: Diagram showing the dimensions of the Kidde Hardwired 120V AC/DC Alarm, which is 5 inches in diameter and 1.75 inches in depth.

Figure 4: Home Safety Product Placement Guide illustrating recommended locations for smoke alarms, carbon monoxide alarms, fire extinguishers, and escape ladders within a typical home layout.

작동 지침

The Kidde i12060A smoke alarm features simple operation with clear visual indicators.

• 대기 모드: The red LED flashes approximately every 40 seconds, indicating the alarm is operating correctly. The green LED remains steadily lit when AC power is present.
• 알람 모드 : When smoke is detected, the alarm will sound a loud, continuous siren, and the red LED will flash rapidly.
• 알람 메모리: If the alarm has been activated and then silenced, the red LED will flash rapidly for a period to indicate that an alarm condition occurred.
• 소음 차단 모드: To silence a nuisance alarm (e.g., from cooking smoke), press the Test/Hush button. The alarm will be silenced for approximately 7 minutes. The red LED will flash every 10 seconds during Hush mode.
• 알람 테스트: Press and hold the Test/Hush button until the alarm sounds. This should be done weekly to ensure proper function.

그림 5: 전면 view of the Kidde Smoke Detector showing the green LED illuminated, indicating that the unit is receiving AC power.

유지

• 배터리 교체: The 9V battery should be replaced at least once a year, or immediately if the alarm chirps to indicate a low battery. The front-load battery door makes this process simple.
• 청소: Clean the smoke alarm regularly (at least once a month) to remove dust and debris that can interfere with its operation. Use a soft brush attachment on your vacuum cleaner to clean around the vents. Do not paint the alarm.
• 삶의 끝: This smoke alarm has a 10-year limited warranty. It is recommended to replace the alarm after 10 years from the date of installation, regardless of whether it appears to be functioning.

그림 6: 전면 view of the Kidde Smoke Detector with the front-load battery door open, revealing the 9V battery compartment for easy access and replacement.

문제 해결

더 자세한 문제 해결 방법은 공식을 참조하세요. 문제 해결 가이드(PDF).

명세서

• 상표: 키드
• 모델: i12060A
• 전원: Hardwired (120 Volts AC) with 9V Battery Backup
• 센서 유형: 이온화
• 알람 유형: Fire Safety, Ionization, Wired, Interconnected, Tamp내식성
• 제품 크기: 1.75인치 깊이 x 5인치 너비 x 5인치 높이
• 품목 무게: 8 온스
• 색상: 하얀색
• 작동 습도: 상대 습도 5% ~ 95%, 비응축
• 상한 온도 등급: 화씨 100도
• 호환 장치: Up to 24 Kidde devices
• 인증: UL217, NFPA72, NFPA 101 (1 & 2 Family), CA Fire Marshall, FHA, HUD
• 포함된 구성 요소: Smoke Alarm, 9V Battery
• 한국어: 047871297306
• 부품 번호: 21029730
• 첫 이용 가능 날짜: 4년 2020월 XNUMX일

보증 정보

The Kidde i12060A Smoke Detector comes with a 5-year limited warranty. This warranty period begins when the alarm is powered on. If the power-on date is unknown, it should be assumed that the alarm needs to be replaced after 10 years from the manufacturing date (typically found on the back of the unit).

지원 및 추가 리소스

For complete operating instructions, detailed installation diagrams, and further information, please refer to the official documents:

• 사용 설명서 (PDF)
• 문제 해결 가이드(PDF)

공식을 방문할 수도 있습니다 Kidde Store on Amazon 더 많은 제품과 정보를 확인하세요.