소개
The Cooler Master SickleFlow 120 is a versatile cooling solution designed for both CPU coolers and case intake/exhaust applications. This fan features an optimized blade design for improved airflow and pressure, a reinforced frame for reduced turbulence and noise, and a sealed bearing for enhanced durability. This manual provides instructions for the proper installation, operation, and maintenance of your SickleFlow 120 fan.
패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- 1 x Cooler Master SickleFlow 120 Fan
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | MFX-B2NN-18NPK-R1 |
| 치수(길이 x 너비 x 높이) | 4.72" x 4.72" x 0.98"(120mm x 120mm x 25mm) |
| 팬 속도 | 650 - 1800 RPM (PWM) ± 10% |
| 공기 흐름 | 62CFM ± 10% |
| 공기압 | 2.5 mmH2O ± 10% |
| 소음 수준 | 8~27dBA |
| 베어링 유형 | 소총 베어링 |
| 평균 주행거리 | 160,000시간 |
| 정격 볼륨tage | 12VDC |
| 정격 전류 | 0.15A |
| 전원 커넥터 | 4 핀 PWM |
| 전력 소비 | 1.8와트 |
| 재료 | 플라스틱, 금속 |
| 무게 | 5.5 온스(156g) |
설정 및 설치
Follow these steps to properly install your Cooler Master SickleFlow 120 fan:
- 시스템을 준비하세요: 설치를 시작하기 전에 컴퓨터 전원이 꺼져 있고 벽면 콘센트에서 플러그가 뽑혀 있는지 확인하십시오.
- 설치 위치를 확인하십시오: Determine the desired location for the fan within your PC case or on your CPU cooler/radiator. Common locations include front, rear, top, or bottom of the case, or directly on a heatsink.
- 선풍기를 설치하세요: Align the fan with the screw holes on your case or cooler. Use the provided mounting screws to secure the fan firmly. Ensure the fan is oriented correctly for desired airflow (intake or exhaust).
이미지: 각도 view of the SickleFlow 120 fan, illustrating its frame and mounting points for installation.
- 전원 연결: Locate the 4-pin PWM fan header on your motherboard. Connect the fan's 4-pin connector to this header. Ensure the connector is fully seated.
- 케이블 관리: 다른 구성 요소나 공기 흐름에 방해가 되지 않도록 팬 케이블을 깔끔하게 배선하세요.
- 전원 켜기: Once the fan is securely mounted and connected, close your PC case, plug in the power, and turn on your computer. The fan should begin to spin.
작동 지침
The Cooler Master SickleFlow 120 fan operates automatically once connected to a compatible 4-pin PWM fan header on your motherboard. The fan speed is controlled by your motherboard's BIOS/UEFI settings or through fan control software provided by your motherboard manufacturer or Cooler Master.
- PWM 제어: The 4-pin PWM connector allows for precise control over the fan's rotational speed, enabling it to adjust based on system temperature for optimal cooling and noise levels.
- 공기 흐름 방향: The fan typically has an arrow indicating the direction of airflow and blade rotation. Ensure it is set to either draw air into the case (intake) or push air out (exhaust) as needed for your system's cooling configuration.
이미지: 위에서 아래로 view of the SickleFlow 120 fan, highlighting the blade design responsible for airflow.
유지
정기적인 유지 관리는 선풍기의 최적 성능과 수명 연장에 도움이 됩니다.
- 먼지 청소: Periodically inspect the fan blades and frame for dust accumulation. Use compressed air or a soft brush to gently remove dust. Ensure the fan is powered off and unplugged before cleaning.
- 베어링 관리: The SickleFlow 120 features a sealed rifle bearing designed to prevent dust and lubricating oil leakage, requiring no user maintenance or lubrication.
- 장애물 확인: Ensure no cables or other components are obstructing the fan blades, which can cause noise or damage.
문제 해결
If you encounter issues with your SickleFlow 120 fan, refer to the following common problems and solutions:
- 선풍기가 돌아가지 않습니다.
- Check that the 4-pin PWM connector is securely plugged into the motherboard's fan header.
- BIOS/UEFI 설정에서 메인보드의 팬 헤더가 활성화되어 있는지 확인하십시오.
- Test the fan on a different fan header or with a fan controller if available, to rule out a faulty header.
- Fan is making excessive noise:
- 팬이 단단히 고정되어 케이스나 다른 부품에 부딪혀 진동하지 않는지 확인하십시오.
- Check for any cables or debris obstructing the fan blades.
- Adjust fan speed settings in your motherboard's BIOS/UEFI or software to a lower RPM if noise is a concern at high speeds.
- 열악한 냉각 성능:
- Verify the fan's airflow direction is appropriate for its location (e.g., intake for front, exhaust for rear).
- Clean any dust accumulation on the fan blades or surrounding components (e.g., heatsink fins, case filters).
- Ensure there is adequate space around the fan for unrestricted airflow.
보증 및 지원
For detailed warranty information and technical support, please visit the official Cooler Master web해당 사이트에서 제품 등록, 자주 묻는 질문(FAQ) 및 고객 서비스 연락처 정보를 찾을 수 있습니다.
쿨러마스터 공식 Web대지: www.coolermaster.com
