소개
The Mitel MiVoice 6970 IP Conference Phone is designed to provide high-quality wideband audio conferencing for various room sizes, from medium-to-large conference rooms to executive offices. This device features a contemporary design with 360-degree room coverage, ensuring clear audio for all participants. This manual provides instructions for setting up, operating, and maintaining your conference phone.
제품 끝view
그림 1: 전면 view of the Mitel MiVoice 6970 IP Conference Phone, showing the touchscreen display and control buttons.
그림 2: 상향식 view of the Mitel MiVoice 6970 IP Conference Phone, highlighting the speaker grille and overall design.
The Mitel MiVoice 6970 features a 7-inch 480x800 capacitive color LCD touchscreen display for intuitive navigation. It incorporates 8 beam-forming microphones for 360-degree audio pickup and Mitel’s Hi-Q audio technology with Automatic Gain Control (AGC) to optimize sound quality and reduce background noise. The device also includes Bluetooth 4.1 for mobile phone pairing and two USB ports for connectivity.
설정
패키지 내용
- Mitel MiVoice 6970 IP Conference Phone
- 이더넷 케이블
- 빠른 시작 가이드(해당되는 경우)
전화 연결
- 놓기: Position the conference phone centrally in your meeting room to ensure optimal 360-degree microphone coverage.
- Power and Network Connection (PoE): The Mitel 6970 is powered via Power Over Ethernet (PoE). Connect one end of the Ethernet cable to the LAN port on the back of the conference phone and the other end to a PoE-enabled network switch or PoE injector.
- 초기 부팅: Once connected, the phone will automatically power on and begin the boot-up sequence. This may take a few minutes.
- 네트워크 구성: The phone will attempt to obtain network settings (IP address, etc.) via DHCP. If your network requires static IP configuration, refer to the on-screen prompts or your network administrator for details.
작동 지침
터치스크린 디스플레이 사용
The 7-inch capacitive color LCD touchscreen is the primary interface for the MiVoice 6970. Navigate menus, dial numbers, and manage calls by tapping on the screen icons and options.
전화 걸기 및 받기
- 국번: Tap the "Dialer" icon on the touchscreen and enter the desired number using the on-screen keypad. Tap the "Call" button to initiate the call.
- 답변 : When an incoming call rings, tap the "Answer" icon on the touchscreen.
- 통화 종료: Tap the "End Call" icon to terminate an active call.
- 무음: Tap the "Mute" icon on the screen or the physical mute button to mute/unmute the microphones during a call.
블루투스 페어링
The phone supports Bluetooth 4.1, allowing you to pair your mobile phone for audio integration.
- On the MiVoice 6970, navigate to the Bluetooth settings menu via the touchscreen.
- Enable Bluetooth and set the phone to "Discoverable" mode.
- On your mobile phone, search for available Bluetooth devices and select "Mitel 6970".
- 메시지가 표시되면 두 기기 모두에서 페어링 코드를 확인하세요.
- Once paired, you can route mobile phone calls through the conference phone's speakers and microphones.
USB 포트
The two integrated USB ports can be used for various purposes, such as connecting external storage devices for recording or firmware updates, or charging small mobile devices (check power output specifications for compatibility).
Audio Technology (Hi-Q Audio & AGC)
The Mitel 6970 utilizes Hi-Q audio technology and Automatic Gain Control (AGC). This system automatically adjusts microphone sensitivity and speaker volume to ensure clear communication for all participants, minimizing background noise and ensuring active talkers are heard clearly.
유지
- 청소: Use a soft, dry, lint-free cloth to clean the phone's exterior and touchscreen. Do not use abrasive cleaners, solvents, or aerosol sprays.
- 펌웨어 업데이트: Periodically check for firmware updates from Mitel to ensure optimal performance and access to new features. Updates are typically managed by your IT department or network administrator.
- 환경 조건: Operate the phone within recommended temperature and humidity ranges to prevent damage. Avoid exposing the device to direct sunlight, excessive heat, or moisture.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 전화기의 전원이 켜지지 않습니다. | PoE 연결이 없거나 이더넷 케이블에 문제가 있습니다. | Ensure the Ethernet cable is securely connected to a PoE-enabled port. Verify the PoE switch or injector is functioning. |
| 전화음이 나지 않거나 전화를 걸 수 없습니다. | Network connectivity issue; incorrect network configuration; VoIP service not registered. | Check network cable. Verify IP address and network settings. Contact your IT administrator to confirm VoIP service registration. |
| 오디오 품질이 좋지 않습니다(에코, 잡음). | Improper phone placement; network latency; microphone obstruction. | Ensure the phone is centrally located and not too close to walls or reflective surfaces. Check network connection stability. Ensure microphones are not covered. |
| 블루투스 페어링에 실패했습니다. | Bluetooth not enabled on phone or mobile device; devices out of range; interference. | Ensure Bluetooth is enabled on both devices. Move devices closer. Restart both devices and try pairing again. |
명세서
- 모델: Mitel MiVoice 6970 (50008271)
- 표시하다: 7-inch 480x800 Capacitive Color LCD Touchscreen
- 마이크: 8 beam-forming microphones with 360-degree coverage
- 오디오 기술: Mitel Hi-Q audio with Automatic Gain Control (AGC)
- 연결성: Bluetooth 4.1, 2x USB ports, Ethernet (PoE)
- 전원: 이더넷을 통한 전원 공급(PoE)
- 치수(대략): 19.13 x 10.71 x 5.83 인치
- 무게 (근사치) : 4.29파운드
- 재료: 플라스틱
- 색상: 검은색
- 기록 용량 : 16 minutes (basic answering system)
- 호환 장치: IP Networks, Computers, Mobile Phones, VoIP Services
보증 및 지원
For information regarding the product warranty, please refer to the warranty card included with your purchase or visit the official Mitel website. Technical support and additional resources can be found through your authorized Mitel reseller or by contacting Mitel customer service directly. Please have your product model number (50008271) and serial number ready when seeking support.
메모: This manual provides general guidance. Specific features and configurations may vary based on your organization's VoIP system setup. Consult your IT administrator for system-specific details.
