1. 서론
Thank you for choosing the MOUNTUP Single Computer Monitor Stand. This full motion gas spring desk monitor arm is designed to enhance your workspace ergonomics by providing flexible positioning for your monitor. It is compatible with most flat and curved computer monitors from 17 to 32 inches, supporting a maximum weight of 17.6 lbs. This manual will guide you through the installation, operation, and maintenance of your new monitor mount.
2. 안전 정보
Please read and understand all instructions before installation and use. Failure to do so may result in personal injury or property damage. If you have any questions, please contact MOUNTUP customer support.
- 최대 중량 용량은 17.6파운드(8kg)를 초과하지 마십시오.
- Ensure the desk surface is stable and strong enough to support the combined weight of the mount and monitor.
- Always keep the arm in a horizontal position during gas spring tension adjustment to prevent injury or damage.
- Use all provided hardware and follow the installation steps precisely.
- 설치하는 동안 어린이와 애완동물이 접근하지 못하도록 하세요.
3. 포장 목록
설치를 시작하기 전에 모든 구성 요소가 있고 손상되지 않았는지 확인하세요.
Figure 3.1: Key features and compatibility of the MOUNTUP monitor mount.
패키지에는 다음이 포함되어야 합니다.
- Monitor Arm Assembly (Upper and Lower Arms)
- 책상 기둥
- C-Clamp 베이스
- 그로밋 베이스 구성 요소
- VESA 플레이트
- All necessary screws, washers, and Allen keys
- 사용 설명서
4. 설정 및 설치
Choose between C-Clamp or Grommet mounting based on your desk type and preference.
Figure 4.1: The monitor mount offers both C-Clamp 및 그로밋 장착 옵션.
4.1C-Clamp 설치
- C-cl을 부착하세요amp base to the desk pole using the provided screws and Allen key.
- Position the assembled clamp and pole on the edge of your desk.
- C-cl을 조입니다amp 거치대가 책상에 단단히 고정될 때까지 나사를 조이세요. 거치대가 안정적이고 흔들리지 않는지 확인하세요.
4.2 그로밋 설치
- C-cl을 분해하세요amp by removing the screw and plate.
- Insert the desk pole through the grommet hole in your desk.
- Secure the pole from underneath the desk using the grommet base plate and tightening knob.
4.3 Attaching VESA Plate to Monitor
- 모니터를 부드럽고 깨끗한 표면에 화면이 아래로 향하도록 조심스럽게 놓으십시오.
- VESA 플레이트를 모니터 뒷면의 장착 구멍(75x75mm 또는 100x100mm)에 맞춰 정렬하십시오.
- Secure the VESA plate to the monitor using the appropriate screws. Do not overtighten.
4.4 Attaching Monitor to Arm
- Slide the VESA plate with the attached monitor onto the monitor arm's mounting head.
- Ensure the monitor is fully seated and then tighten the security bolt to prevent accidental detachment.
4.5 케이블 관리
Route your monitor cables through the integrated cable management clips on the arm and pole to maintain a tidy workspace.
Figure 4.2: Effective cable management keeps your desk organized.
4.6 설치 비디오 가이드
Video 4.1: A detailed installation guide for the MOUNTUP Single Monitor Mount (MU0025).
5. 운영 및 조정
The MOUNTUP monitor arm offers full motion capabilities for optimal view편안함을.
Figure 5.1: The monitor arm provides extensive adjustability for ergonomic positioning.
5.1 가스 스프링 장력 조정
Adjust the gas spring tension to match your monitor's weight for smooth and stable positioning. Keep the arm in a horizontal position during adjustment.
Figure 5.2: Adjusting the gas spring tension for optimal monitor support.
- If the arm shoots up: Turn the adjustment screw clockwise ("-" direction) to reduce tension for a lighter monitor.
- If the arm falls down: Turn the adjustment screw counter-clockwise ("+" direction) to increase tension for a heavier monitor.
5.2 기울기 조정
The monitor can tilt +90° (up) and -45° (down) to reduce glare and optimize view각도를 나타냅니다.
- Loosen the tilting bolt on the VESA plate.
- Position the screen to your desired angle.
- Retighten the tilting bolt to fix the angle.
5.3 회전 및 스위블
The arm allows for extensive swivel and 360° rotation for landscape or portrait orientation.
Figure 5.3: Achieve perfect viewing angles with 360-degree rotation.
- Lower Arm Swivel: ±135°
- Upper Arm Swivel: ±180°
- Screen Swivel: ±90°
- Screen Rotation: 360°
5.4 Adjustment Video Guide
Video 5.1: Guide to Gas Spring Tension & Tilting Adjustment for MOUNTUP Monitor Mount (MU0025).
Video 5.2: Demonstration of the MOUNTUP Single Monitor Desk Mount (MU0025) functions.
6. 유지관리
Regular maintenance ensures the longevity and optimal performance of your monitor mount.
- 청소: 부드러운 천으로 마운트를 닦아주세요.amp 천으로 닦으십시오. 마감재를 손상시킬 수 있는 연마성 세척제나 용제는 사용하지 마십시오.
- 점검: Periodically check all screws and connections to ensure they are tight and secure. Retighten if necessary.
- 가스 스프링: If the gas spring tension feels off, refer to Section 5.1 for adjustment instructions.
7. 문제 해결
문제가 발생하면 다음의 일반적인 문제와 해결 방법을 참조하세요.
- Monitor arm falls down or shoots up: This indicates incorrect gas spring tension. Refer to Section 5.1 for proper adjustment based on your monitor's weight.
- Monitor tilts forward or backward unexpectedly: The tilting bolt may be loose. Refer to Section 5.2 to loosen, adjust, and retighten the tilting bolt.
- 마운트가 불안정하거나 흔들리는 느낌이 듭니다. C-cl을 확인하십시오amp or grommet base is securely tightened to the desk. Check all connection points on the arm and VESA plate.
- 팔을 움직이는 데 어려움이 있습니다. The tension might be too high for a lighter monitor, or the joints might need lubrication (though typically not required for gas spring arms). Ensure no cables are snagged.
문제가 지속되면 고객 지원팀에 문의하세요.
8. 사양
| 특징 | 사양 |
|---|---|
| 모델 번호 | 무크 녹스 |
| 호환 가능한 화면 크기 | 17 ~ 32 인치 |
| 중량 용량 | 4.4 - 17.6파운드(2 - 8kg) |
| VESA 호환성 | 75x75mm, 100x100mm |
| 장착 유형 | C-Clamp / 그로밋 베이스 |
| C-Clamp 책상 두께 | 0.39" - 3.15" (10-80mm) |
| 그로밋 데스크 두께 | 0.39" - 3.15" (10-80mm) |
| 그로밋 구멍 직경 | 0.39" - 2.36" (10-60mm) |
| 재료 | 강철, 알루미늄, 플라스틱 |
| 색상 | 검은색 |
| Max Height (from desk) | 22.64인치(57.5cm) |
| 최대 확장 | 19.8인치(50.3cm) |
| 기울기 범위 | +90° / -45° |
| 스크린 회전 | ±90° |
| 화면 회전 | 360° |
9. 보증 및 지원
All MOUNTUP monitor mounts are backed by 3-year support. Our friendly customer support team is available to answer any questions within 12 hours. For assistance, please visit the official MOUNTUP website or contact us directly through your purchase platform.
