1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of your Hikvision DS-2CD1123G0E-I 2MP IR Fixed Dome Network Camera. Please read this manual thoroughly before using the product to ensure proper setup and functionality. This camera is designed for surveillance applications, offering high-resolution video and robust environmental protection.
2. 안전 지침
- 전원 공급 장치: Use only the specified power adapters (12V DC) or Power over Ethernet (PoE) compliant devices. Ensure the power source is stable and meets the camera's requirements.
- 설치: Installation should be performed by qualified personnel in accordance with all local codes. Ensure the mounting surface can support the camera's weight.
- 환경: Do not expose the camera to extreme temperatures, high humidity, or corrosive environments. Despite its IP67 rating, avoid direct submersion.
- 청소: 부드럽고 마른 천으로 닦아주세요. 강한 세제나 연마재는 사용하지 마세요.
- 유지: 카메라를 분해하거나 개조하지 마십시오. 모든 정비는 자격을 갖춘 기술자에게 맡기십시오.
3. 패키지 내용
Please check the package contents upon receipt to ensure all components are present and in good condition. Typically, the package includes:
- Hikvision DS-2CD1123G0E-I Network Camera
- 장착 나사 및 플러그
- 빠른 시작 가이드
- 드릴 템플릿
4. 제품 오버view
The Hikvision DS-2CD1123G0E-I is a 2-megapixel fixed dome network camera designed for reliable surveillance. It features a 1/2.8" progressive scan CMOS sensor, delivering 1920 × 1080 resolution at up to 30 frames per second. The camera is equipped with a 2.8 mm fixed lens, providing a wide field of view.
주요 특징은 다음과 같습니다.
- 고해상도: 2MP (1920 × 1080) for clear imaging.
- 적외선(IR) 야간 투시경: Built-in IR LEDs provide illumination up to 30 meters for clear video in low-light or no-light conditions.
- Advanced Video Compression: Supports H.265+/H.265/H.264+/H.264 for efficient bandwidth and storage usage.
- 이미지 향상: Features like 3D Digital Noise Reduction (3D DNR), Digital Wide Dynamic Range (DWDR), and Backlight Compensation (BLC) improve image quality in various lighting conditions.
- 견고한 디자인: IP67 rated for dust and water protection, and IK10 rated for vandal resistance, making it suitable for both indoor and outdoor environments.
- 스마트 기능: Includes motion detection and video tamp알람이 울려요.
- PoE(Power over Ethernet): Simplifies installation by allowing power and data transmission over a single Ethernet cable.
그림 1: 전면 view of the Hikvision DS-2CD1123G0E-I dome camera.
Figure 2: Icons representing key features: Digital WDR, 3D DNR, IR night vision, H.265 compression, and IP67 weather resistance.
Figure 3: Visual representation of features like Region of Interest (ROI), sharpness enhancement, H.265+ compression efficiency, IP67/IK10 ratings, and DC 12V/PoE power options.
5. 설치 및 설정
5.1 물리적 설치
- 위치를 선택하세요: Select a suitable ceiling or wall location for optimal surveillance coverage. Consider the camera's 2.8mm fixed lens field of view.
- 설치: Use the provided drill template to mark and drill holes. Secure the camera base using the supplied screws and plugs. The camera supports screw-in ceiling mounting.
- 치수: The camera has dimensions of approximately 111 mm (4.4") diameter and 82.4 mm (3.2") height. Ensure adequate space for installation.
Figure 4: Detailed dimensions of the Hikvision DS-2CD1123G0E-I camera in millimeters and inches.
5.2 전원 및 네트워크 연결
- 힘: Connect a 12V DC power adapter (not included) to the camera's power input, or connect an Ethernet cable from a Power over Ethernet (PoE) switch or injector to the camera's RJ45 Ethernet port.
- 회로망: Connect the camera to your network using a standard RJ45 Ethernet cable. The camera features a 10M/100M self-adaptive Ethernet interface.
5.3 초기 구성
After physical installation and connection, you can access the camera for initial configuration:
- 카메라의 세계를 알아보세요: Use Hikvision's SADP (Search Active Devices Protocol) tool on a connected computer to find the camera's IP address.
- 카메라 활성화: Set a strong password for the camera if it's not already activated.
- 입장 Web 인터페이스: 열기 web browser (e.g., Internet Explorer, Chrome, Firefox) and enter the camera's IP address to access its web interface. Log in with your credentials.
- 네트워크 설정: Configure network parameters such as IP address, subnet mask, and gateway as needed for your network environment.
6. 운영
6.1 라이브 View 그리고 녹음
설정이 완료되면 다음 작업을 수행할 수 있습니다. view live video streams and manage recordings through the camera's web interface, a Network Video Recorder (NVR), or the Hik-Connect mobile application.
- 살다 View: 라이브 액세스 view to monitor the surveillance area in real-time.
- 녹음: Configure recording schedules, motion-triggered recording, or continuous recording via your NVR or the camera's settings.
6.2 스마트 기능
The camera supports various smart features to enhance security:
- 동작 감지: 움직임이 감지될 때 경보 또는 녹화가 실행되도록 감지 영역과 감도를 설정하십시오.
- 비디오 Tamp알람: Alerts you if the camera's view 방해를 받거나amp로 이루어짐.
- Illegal Login Alarm: Notifies you of unauthorized access attempts.
6.3 이미지 설정
Adjust image parameters to optimize video quality for your specific environment:
- Brightness, Contrast, Saturation: Basic image adjustments.
- 날카로움: Enhance image detail.
- 화이트 밸런스: Adjust color accuracy.
- 낮 / 밤 스위치 : Configure automatic, scheduled, or manual switching between day (color) and night (black & white with IR) modes.
7. 유지관리
- 정기 청소: Periodically clean the camera lens and housing with a soft, lint-free cloth to ensure clear images.
- 펌웨어 업데이트: Hikvision 공식 확인 web최적의 성능과 보안을 보장하기 위해 최신 펌웨어 업데이트를 제공하는 사이트입니다. 펌웨어 업그레이드를 위해서는 제공된 지침을 주의 깊게 따르십시오.
- 환경 점검: Ensure the camera's operating environment remains within specified temperature and humidity ranges (-30°C to 60°C, humidity 95% or less non-condensing).
- 케이블 검사: Periodically inspect network and power cables for any signs of wear or damage.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 이미지/비디오 피드 없음 | No power; Network cable disconnected; Incorrect IP address; Camera not activated. | Check power supply/PoE connection; Verify network cable connection; Ensure correct IP settings; Activate camera with a strong password. |
| 화질이 나쁘다 | Dirty lens; Incorrect image settings (brightness, contrast); Insufficient lighting. | Clean the lens; Adjust image settings in the web interface; Ensure adequate lighting or proper IR function. |
| 네트워크를 통해 카메라에 접속할 수 없습니다. | IP address conflict; Network configuration error; Firewall blocking access. | Use SADP tool to verify/change IP; Check network settings (gateway, DNS); Temporarily disable firewall for testing. |
| 동작 감지가 작동하지 않음 | Motion detection not enabled; Sensitivity too low; Detection area not configured. | Enable motion detection in settings; Adjust sensitivity; Configure detection zones. |
9. 사양
Detailed technical specifications for the Hikvision DS-2CD1123G0E-I camera:
Figure 5: Camera specifications including image sensor, illumination, shutter speed, DNR, WDR, lens focal length, aperture, and field of view.
Figure 6: Specifications for IR range, video compression standards, resolution, frame rate, and image enhancement features.
Figure 7: Network features, interface details, general operating conditions, power requirements, ingress protection, materials, dimensions, and weight.
| 특징 | 사양 |
|---|---|
| 이미지 센서 | 1/2.8인치 프로그레시브 스캔 CMOS |
| 최대 해상도 | 1920 × 1080 |
| 프레임 속도 | 30 fps (1920 × 1080) |
| 렌즈 | 2.8mm 고정렌즈 |
| 분야 View (시야) | Horizontal FOV 114.8°, Vertical FOV 62°, Diagonal FOV 135.5° (for 2.8mm) |
| 적외선 범위 | 최대 30m |
| 비디오 압축 | H.265 + / H.265 / H.264 + / H.264 |
| 디지털 노이즈 감소 | 3D 심방세동 |
| 넓은 다이나믹 레인지 | dwdr 확장자 |
| 침투 방지 | IP67(방진 및 방수) |
| 반달 저항 | IK10 (충격 방지) |
| 전원 공급 장치 | 12 VDC ± 25%, 5.5 mm coaxial power plug; PoE (802.3af, class 3) |
| 전력 소비 | Max. 5 W (12 VDC), Max. 6.5 W (PoE) |
| 작동 조건 | -30 °C to 60 °C (-22 °F to 140 °F), Humidity: 95% or less (non-condensing) |
| 통신 인터페이스 | RJ1 45M/10M 자체 적응형 이더넷 포트 100개 |
| 재료 | Front cover: plastic, back cover & bracket: metal |
| 치수 | Camera: Ø 111 mm × 82.4 mm (Ø 4.4" × 3.2") |
| 무게 | 약 400g(0.9파운드) |
| 권장 사용 | 감시 |
| 색상 | 하얀색 |
10. 보증 및 지원
For warranty information, please refer to the warranty card included with your product or visit the official Hikvision website. Technical support can be obtained through your authorized Hikvision dealer or by contacting Hikvision customer service directly. Please have your product model number (DS-2CD1123G0E-I) and serial number ready when seeking support.
