LEDVANCE 360DEG Wall Sensor Instruction Manual

1. 서론

Thank you for choosing the LEDVANCE 360DEG Wall Sensor. This device is designed to provide efficient and automated lighting control for outdoor environments, enhancing both convenience and energy savings. This manual provides essential information for the safe installation, operation, and maintenance of your sensor.

2. 안전 정보

설치 및 작동 전에 이 안전 지침을 주의 깊게 읽어 주십시오. 이 지침을 따르지 않을 경우 감전, 화재 또는 기타 위험이 발생할 수 있습니다.

• 전문적인 설치: Installation must be carried out by a qualified electrician in accordance with all local and national electrical codes.
• 전원 차단: Always disconnect power at the circuit breaker before installing, servicing, or cleaning the device.
• 권tage: 공급 볼륨을 확인tage matches the device's requirements (230 Volt AC).
• 환경 조건: The device has an IP55 protection rating, making it suitable for outdoor use and protected against dust and low-pressure water jets. However, avoid direct exposure to extreme weather conditions beyond its specified operating range (-20°C to +40°C).
• 가감: Do not modify or alter the device in any way. Unauthorized modifications may void the warranty and create safety hazards.

3. 패키지 내용

설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

• 1x LEDVANCE 360DEG Wall Sensor device

4. 제품 특징

• Stand-alone motion and light sensor for wall mounting.
• 360° detection field for comprehensive coverage.
• Optimized for energy saving.
• Three selectable operating modes: continuous light on, activation by motion, or activation by twilight.
• Zero-crossing circuit optimized for the operation of LED luminaires.
• IP55 protection type, suitable for outdoor use.
• Designed to be disassembled for separate control of internal light sources (if applicable).

5. 설정 및 설치

The LEDVANCE 360DEG Wall Sensor is designed for wall mounting. Refer to the following diagrams and instructions for proper installation.

그림 5.1: Dimensions of the LEDVANCE 360DEG Wall Sensor. The sensor measures 7.6 cm in width, 9.5 cm in depth, and 11.1 cm in height.

그림 5.2: 클로즈업 view of the LEDVANCE 360DEG Wall Sensor unit, showing its black polycarbonate housing and the spherical detection lens at the bottom.

5.1 설치 위치

• Choose a wall location that provides the desired detection coverage. The sensor has a 360° detection field and a maximum detection distance of 10 meters.
• Avoid mounting near heat sources, air conditioning vents, or areas with direct sunlight, as these can interfere with sensor performance.
• Ensure the mounting surface is stable and can support the device's weight (250 grams).

5.2 전기 연결

• 경고: 전기 연결을 하기 전에 전원을 차단하십시오.
• Connect the sensor to a 230 Volt AC power supply.
• Follow the wiring diagram provided with the product packaging for correct connections. Ensure all connections are secure and insulated.
• The zero-crossing circuit is optimized for LED luminaires.

6. 사용 설명서

The LEDVANCE 360DEG Wall Sensor offers flexible operation modes and adjustable settings.

6.1 작동 모드

The sensor features three selectable operating modes:

1. Continuous Light On: The connected light remains continuously on, bypassing sensor detection.
2. Activation by Motion: The connected light turns on when motion is detected within the 360° field.
3. Activation by Twilight: The connected light turns on when ambient light levels fall below a set threshold (twilight) and motion is detected.

Refer to the product's internal settings or external switches (if present) to select the desired mode. Note that some settings may require opening the device, which should only be done by a qualified professional.

6.2 Detection Settings

The sensor allows for adjustment of the light duration after detection:

• 빛 지속 시간: The duration for which the light remains on after motion detection can typically be set between 2 seconds and 15 minutes. Adjust this setting according to your preference and energy-saving goals.

7. 유지관리

The LEDVANCE 360DEG Wall Sensor requires minimal maintenance.

• 청소: Periodically clean the sensor lens and housing with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the polycarbonate material.
• 점검: Regularly inspect the device for any signs of damage or wear. If any damage is found, disconnect power and contact a qualified electrician for repair or replacement.

8. 문제 해결

If you experience issues with your LEDVANCE 360DEG Wall Sensor, refer to the following common problems and solutions:

• 표시등이 켜지지 않음:
  • 전원 공급 장치가 연결되어 있고 활성화되어 있는지 확인하세요.
  • Verify the operating mode is set correctly (e.g., 'Activation by Motion' or 'Activation by Twilight').
  • 감지 영역에 장애물이 없는지 확인하십시오.
  • Adjust the sensitivity settings if available.
• 조명이 계속 켜져 있습니다:
  • Check if the operating mode is set to 'Continuous Light On'.
  • Ensure no constant motion is occurring within the detection zone.
• Light turns on unexpectedly:
  • Check for environmental factors like moving branches, small animals, or sudden temperature changes that might trigger the sensor.
  • Adjust the sensor's sensitivity or detection range if possible.

이러한 해결 방법을 시도한 후에도 문제가 지속되면 고객 지원 센터 또는 자격을 갖춘 전기 기술자에게 문의하십시오.

9. 사양

10. 보증 및 지원

The LEDVANCE 360DEG Wall Sensor comes with a 3년 제조사 보증 구매일로부터 정상적인 사용 중에 발생한 재료 및 제조상의 결함을 보장합니다.

For technical support, warranty claims, or further assistance, please visit the official LEDVANCE store or contact their customer service department. You can find more information and contact details on the LEDVANCE Brand Store.

보증을 위해 구매 증빙서류를 보관하세요.