Shure SLXD14/98H Digital Wireless Microphone System User Manual

1. 서론

The Shure SLXD14/98H Digital Wireless Microphone System provides transparent, 24-bit digital audio and reliable RF performance. This system is suitable for various applications, from conferences to live performances. It operates within the G58 Band (470-514 MHz) and offers easy setup with optional rechargeability accessories.

Image: Shure SLXD14/98H Digital Wireless Microphone System, showing the SLXD4 receiver and SLXD1 bodypack transmitter.

제품 끝view 동영상

2. 상자 안에 무엇이 들어있나요?

Your Shure SLXD14/98H Digital Wireless Microphone System package includes the following components:

• 1 x Beta 98H/C miniature instrument microphone
• 1 x SLXD1 bodypack transmitter
• 1 x SLXD4 single-channel receiver
• Antenna and rackmount accessories
• 1 x Zippered bag
• AA 배터리 2개

3. 설정

3.1 하드웨어 설정

Follow these steps to connect your system hardware:

1. Connect Antennas and Power: Securely connect the antennas to the SLXD4 receiver. Then, connect the power supply to the receiver and a power outlet.
2. Connect to Sound System: Connect the receiver's audio output to your sound system (mixer, amplifier, or audio recorder) using an XLR or 1/4-inch cable.
3. 배터리 설치: Open the battery compartment on the SLXD1 bodypack transmitter. Insert the two included 1.5V AA batteries, ensuring correct polarity. For optional extended use, consider the Shure SB903 Lithium-ion rechargeable battery.
4. 다중 수신기: If using two receivers, connect them with an Ethernet cable. For three or more receivers, use a network switch.

3.2 유도 주파수 설정

To ensure optimal performance, perform a guided frequency setup:

1. Turn on the SLXD4 receiver. Ensure all transmitters are turned OFF.
2. On the receiver, use the control knob to navigate to Frequency Setup > Guided Frequency Setup > Initialize My System.
3. Follow the on-screen prompts. The receiver will scan for the best group of channels.
4. Once a frequency is assigned, proceed to sync the transmitter.

3.3 Syncing the Transmitter and Receiver

After setting up the frequency, sync your transmitter with the receiver:

1. Turn on the SLXD1 bodypack transmitter.
2. On the SLXD4 receiver, press the 동조 button. The IR port will illuminate.
3. Align the IR ports on the transmitter and receiver (typically within 15 cm / 6 inches) and hold until the sync is confirmed on the receiver screen.
4. Once synced, your system is ready for use.

3.4 Adding an Additional Receiver

If you are expanding your system with more receivers, follow these steps:

1. Connect the new receiver to your network (via Ethernet cable or network switch if using three or more receivers).
2. Turn on the new receiver.
3. On the new receiver, navigate to Frequency Setup > Guided Frequency Setup > Add Receiver to My System.
4. Ensure all existing synced transmitters are ON to avoid interference during the scan.
5. Follow the on-screen prompts to scan and assign a frequency.
6. Confirm the new receiver is set to the same group number as other receivers in your system.
7. Select 'Apply' to save the settings.
8. Sync the new transmitter with the new receiver as described in Section 3.3.

4. 운영

4.1 Locking and Unlocking the Receiver

To prevent accidental changes to settings, you can lock the receiver controls:

1. On the SLXD4 receiver, use the control knob to navigate to Advanced Settings > Device Lock.
2. Push the knob to edit the setting. You can choose between:
• Lock Menu: 허용합니다 viewing menu options but prevents changes.
• Lock Menu & Power: Prevents menu changes and powering off the device.
3. Push the knob again to save your selection.
4. To unlock, return to the 장치 잠금 메뉴 및 선택 터놓다.

4.2 Activating/Disabling Auto-Lock (Handheld & Bodypack)

Transmitters can also be set to auto-lock:

1. On the handheld or bodypack transmitter, press the 메뉴 button to navigate to the 자동 잠금 화면.
2. 누르다 입력하다, 그 다음에 메뉴 to change the setting to On or 끄다.
3. 누르다 입력하다 설정을 저장하려면 클릭하세요.

4.3 Setting Lock Type (Handheld & Bodypack)

You can choose the type of lock for your transmitter:

1. 송신기에서 버튼을 누르세요 메뉴 button to navigate to the 잠금 유형 화면.
2. 누르다 입력하다, 그 다음에 메뉴 다음 중에서 선택합니다.
• Menu Only: 허용합니다 viewing menu options but prevents changes.
• Menu & Power: Prevents menu changes and powering off the device.
3. 누르다 입력하다 선택 사항을 저장합니다.

5. 유지관리

5.1 배터리 수명

The SLXD1 bodypack transmitter provides up to 8 hours of operation using two AA batteries. For enhanced monitoring and extended use, consider upgrading to the optional Shure SB903 Lithium-ion rechargeable battery. This rechargeable battery allows you to monitor battery charge status in hours and minutes, as well as battery life and health statistics directly on the device.

6. 문제 해결

If you encounter issues with your Shure SLXD14/98H system, consider the following:

• 오디오 없음: Check all cable connections, ensure the transmitter is powered on and synced to the receiver, and verify the receiver's audio output is connected to your sound system.
• 간섭/연결 끊김: Perform a new Guided Frequency Setup (Section 3.2) to find a clear frequency. Ensure transmitters are not too far from the receiver and that there are no obstructions.
• 배터리 부족: Replace AA batteries or recharge the SB903 Lithium-ion battery.
• Controls Locked: Refer to Section 4.1 and 4.2 to unlock the receiver or transmitter controls.

For detailed troubleshooting guides and frequency band compatibility in your area, please refer to the official Shure web대지.

7. 사양

8. 보증 및 지원

This Shure SLXD14/98H Digital Wireless Microphone System comes with a 2년 제조사 보증.

For technical support, warranty claims, or additional product information, please visit the official Shure website or contact Shure customer service directly.